How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI

TL-R600VPN( V4 ) , TL-ER6120( V2 V3 ) , TL-ER6020( V2 ) , TL-ER5120( V3 V4 ) , TL-R480T+( V9 ) , TL-R470T+( V6 )
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.
Here is a configuration example of 802.1Q VLAN for TP-Link routers.
Example:
As the following figure shows, the switch connects to two different groups. It is required that the computers in the two groups cannot communicate with each other, but both of them can access the internet via the router.
Configuration Scheme
Configure 802.1Q VLAN on the router:
1) Create VLAN 2 and VLAN 3, and add port 5 (the LAN port) to both VLANs with the egress rule as Tagged.
Configure 802.1Q VLAN on the switch:
1) Create VLAN 2. Add port 1, 2 to VLAN 2.
2) Create VLAN 3. Add port 1, 3 to VLAN 3.
VLAN Configurations on the Router:
VLAN |
Egress Rule |
PVID |
|
Port 5 |
VLAN 2-3 |
Tagged |
- |
VLAN Configurations on the Switch:
VLAN |
Egress Rule |
PVID |
|
Port 1 |
VLAN 2-3 |
Tagged |
- |
Port 2 |
VLAN 2 |
Untagged |
2 |
Port 3 |
VLAN 3 |
Untagged |
3 |
Note: The PVID value “-” means you don’t need to configure the PVID for the corresponding port, just leave them as the default value.
Configuration Steps:
The router is demonstrated with TL-R600VPN, and the switch is demonstrated with TL-SG105E. The following section shows how to configure 802.1Q VLAN on the router and switch.
- Configuring 80.21Q VLAN on the router
Choose the menu Network >VLAN > VLAN, click to load the configuration page. Create VLAN 2, 3 and add port 5 to both of the VLANs with the egress rule as Tag.
- Configuring 80.21Q VLAN on the switch
Step 1:
Choose the menu VLAN > 802.1Q VLAN to load the configuration page. Enable 802.1Q VLAN function. Add port 1, 2 to VLAN 2 and port1, 3 to VLAN 3 as untagged ports. Specify the egress rule of port 1 as tagged in VLAN 2and VLAN 3; specify the egress rule of port 2 in VLAN 2as untagged; specify the egress rule of port 3 in VLAN 3 as untagged.
Step 2:
Choose the menu VLAN > 802.1Q PVID Setting to load the configuration page. Configure the PVIDs for port 2-3 as 2 and 3 respectively, and leave the PVID of port 1 as the default value 1.
更多相關文章
這篇faq是否有用?
您的反饋將幫助我們改善網站
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- 其他
謝謝
感謝您的反饋。
點擊此處與TP-Link技術支持聯繫。
推薦產品
Your Privacy Choices
本網站使用 cookie 來改善網站引導、分析線上活動並在我們的網站上提供最佳的使用者體驗。您可以隨時反對使用 cookie。您可以在我們的隱私權政策中找到更多資訊。 不再顯示
基本 Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
TP-Link
SESSION, JSESSIONID, accepted_local_switcher, tp_privacy_banner, tp_privacy_base, tp_privacy_marketing, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Zendesk
OptanonConsent, __cf_bm, __cfruid, _cfuvid, _help_center_session, _pendo___sg__.<container-id>, _pendo_meta.<container-id>, _pendo_visitorId.<container-id>, _zendesk_authenticated, _zendesk_cookie, _zendesk_session, _zendesk_shared_session, ajs_anonymous_id, cf_clearance
分析和行銷 Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au