企業
Search
企業
Search

下載 EAP115-Wall V1

產品簡介
相關文件
300Mbps 無線 N 嵌牆式基地台
EAP115-Wall

設定影片

  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    了解更多

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    了解更多

  • How to setup the Omada Hardware Controller (OC200/OC300) via web browser

    This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    了解更多

  • How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone

    This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    了解更多

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    了解更多

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    了解更多

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    了解更多

功能過濾: 全部 使用者應用程式需求設定指南故障排除功能說明或規格參數的問與答

常見問題

韌體

韌體更新可以解決前版韌體可能有的一些問題並改善它目前的效能。

若要更新

重要：若要防止韌體升級失敗，請在繼續在升級程序前閱讀以下內容

  • 請在您購買地點的當地官方網站下載韌體並對您的TP-Link設備進行升級，否則將違反保固條款。如果有需要，請點選 這裡 以變更網站。
  • 為了合適的韌體版本，請確認您設備目前的硬體版本。錯誤的韌體更新可能會損壞您的設備並使保固失效。（ 一般來說，V1.x=V1）
  • 非常重要，更韌體升級期間請勿關閉設備的電源， 因為這很可能會導致產品的永久性損壞。
  • 除非在TP-Link設備沒有LAN/Ethernet連接埠的狀況下，否則請不要使用無線連接更新韌體。對於LTE-MiFi，建議您透過USB連接埠進行升級。
  • 建議您停止電腦上所有的網際網路應用程式，或在升級前簡單地中斷網際網路線路即可。
  • 在升級前請使用解壓縮軟體，例如：WinZIP 或 WinRAR 解壓縮您下載的檔案。
EAP115-Wall(EU)_V1_5.0.0 Build 20200914
發佈日期: 2020-12-18 語言: 英語 檔案大小: 5.40 MB

This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller.

 

New Feature/Enhancement:

1. Add Auto Channel Deployment function (need to work with Cloud-Based Controller).

2. Add AP spectrum scanning function.

3.SSH supports to write the Controller IP address to EAP. The command is: xsetctrladdr “controller IP:29810”.

4. Add past connections function to show the historical connection clients.

5. Add the list of client association time activities and client association activities.

6. Optimize the high resources using of Omada Controller when managing a large number of EAPs in batches.

7. Optimize security vulnerabilities.

Bug Fixed:

1. Fixed the bug that the new adding SSID may not take effect after deleting the old SSID.

2. Fixed the bug that the portal function of the first 2.4G SSID may not take effect when changing the configuration of HTTPS Redirect function.

3. Fixed the bug that the “client detail log” may not be sent normally to log server.

 

Notes

1. For EAP115-Wall v1 only.

2. This version of firmware is applied to Omada APP of version 2.1.X or above.

3. This firmware is only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, you must upgrade Omada controller as well, and please follow Omada Controller Upgrade Guide to upgrade Omada controller.
EAP115-Wall(EU)_V1_1.20.1 Build 20200619
發佈日期: 2020-07-07 語言: 英語 檔案大小: 5.38 MB

This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well, and please follow Upgrade Guide to upgrade Omada controller.

If your EAP is working standalone, please note that the EAP will be reset after upgrading to this firmware and you need to re-configure your EAP.

 

New Feature/Enhancement:

1. Fully adapt to Omada SDN controller.

The following points 2-8 are effective on Omada SDN controller.

2. Add URL-Filter function.

3. Add IP-Port/IP Profile function.

4. Add 802.11 Rate Control function.

5. Add MAC-Based Authentication function.

6. Support to show association failures statistics on the dashboard interface of Omada SDN controller.

7. Support SNMP V3.

8. Optimize Access Controller function.

9. Support to skip SSID settings during Quick Setup process.

10. Add Layer-3 Accessibility settings for HTTPS and SSH features.

11. Add Cloud-Based Controller Management switch and Controller URL settings.

12. Optimize the performance of connecting multiple clients.

13. Add VLAN Config interface to support VLAN configuration for Ethernet ports.

Bug Fixed:

1. Fixed the bug that guest network will not take effect for some IP address of 10.x.x.x.

2. Fixed the bug that client entry will disappear if click the client interface continuously.

3. Fixed the bug that failed to save portal settings if set specific Term of User content.

4. Fixed the bug that failed to pop up portal page if SSID contains ~!@#$%^&*()_+{}:"|<>?/.,;'\[]-=`.

5. Fixed the bug that cannot access management web if APP is accessing the Radio interface of the EAP.

6. Fixed the bug that failed to access Redirect URL after passing portal authentication.

Notes:

1. For EAP115-Wall v1 only.

2. Your device's configuration will be lost after upgrading and you need to re-configure your devices because some new features are not compatible with the old version. Suggest to back up your configuration before upgrading and please note the new version doesn't support to restore the old configuration file.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from the firmware released in 2018 or earlier to this version directly.

5. This firmware is only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, you must upgrade Omada controller as well, and please follow Omada Controller Upgrade Guide to upgrade Omada controller.
EAP115-Wall(EU)_V1_1.6.2 Build 20200619
發佈日期: 2020-07-01 語言: 英語 檔案大小: 5.91 MB

Recommended Controller Software Version: Omada Controller v3.2.6 or above

 

Bug Fixed:

Fixed the bug that enabling and configuring Port VLAN makes the wireless clients that connected to default SSID cannot communicate normally.

Notes:

1. For EAP115-Wall v1 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from the firmware released in 2018 or earlier to this version directly.

若要在TP-Link產品上使用第三方韌體

一些TP-Link產品的官方韌體可以被第三方韌體替換，例如：DD-WRT。TP-Link沒有義務提供任何維護或支持，也不保證第三方固件的性能和穩定性。使用第三方韌體後，將使產品的保固失效。

供程式人員的開放原始碼(GPL)

請注意：TP-Link的產品部分包含由第三方開發的程式碼，包括：受GNU通用公共許可證（“GPL”），版本1 /版本2 /版本3或GNU較寬鬆通用公共許可證（“LGPL”）制約的程式碼。您可以使用相應的軟體條件來遵循GPL許可條款。

在此您可以查看、列印與下載對應的GPL許可條款。 您將收到TP-Link產品中用於直接下載的相關軟件的GPL原始以及進一步的資訊，包含在GPL碼中心下包含GPL程式碼的TP-Link軟體列表。

各自的程序分發沒有任何擔保; 甚至沒有對適銷性或特定用途的適用性的暗示保證。請參閱各自的GNU通用公共許可證了解更多詳情。

管理軟體

EAP控制器用於集中管理多個EAP。

發佈日期: 2021-02-09 語言: 英語 檔案大小: 90.12 MB
作業系統: Windows 7/8/10/Server

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

TL-R605_V1, TL-ER7206_V1

 

Bug Fixed:

1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.

2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.

3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.

4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.

5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.

6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.

7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.

8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.

9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.
發佈日期: 2021-02-09 語言: 英語 檔案大小: 59.91 MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

TL-R605_V1, TL-ER7206_V1

 

Bug Fixed:

1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.

2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.

3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.

4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.

5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.

6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.

7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.

8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.

9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.
發佈日期: 2021-02-09 語言: 英語 檔案大小: 58.43 MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

TL-R605_V1, TL-ER7206_V1

 

Bug Fixed:

1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.

2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.

3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.

4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.

5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.

6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.

7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.

8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.

9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian.

6. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
發佈日期: 2020-12-25 語言: 英語 檔案大小: 125.65MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian

Bundled Firmware:
EAP110_V1, EAP110_V2 EAP110_V4
EAP115_V1, EAP115_V2 EAP115_V4
EAP225_V1, EAP225_V2 EAP225_V3
EAP225-Outdoor_V1
EAP110-Outdoor_V1 EAP110-Outdoor_V3
EAP245_V1 EAP245_V3
EAP115-Wall_V1 (EAP115-Wall is suitable for EU version only)
EAP225-Wall_V2 
EAP320_V1 EAP320_V2
EAP330_V1 EAP330_V2

Bug Fixed:
1. Fixed the XSS attack vulnerability

Notes:
1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
 
發佈日期: 2020-12-25 語言: 英語 檔案大小: 99.43MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian

Bundled Firmware:
EAP110_V1, EAP110_V2 EAP110_V4
EAP115_V1, EAP115_V2 EAP115_V4
EAP225_V1, EAP225_V2 EAP225_V3
EAP225-Outdoor_V1
EAP110-Outdoor_V1 EAP110-Outdoor_V3
EAP245_V1 EAP245_V3
EAP115-Wall_V1 (EAP115-Wall is suitable for EU version only)
EAP225-Wall_V2 
EAP320_V1 EAP320_V2
EAP330_V1 EAP330_V2

Bug Fixed:
1. Fixed the XSS attack vulnerability

Notes:
1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
發佈日期: 2020-12-25 語言: 英語 檔案大小: 120.55MB
作業系統: Windows 7/8/10/Server

Bundled Firmware:
EAP110_V1, EAP110_V2 EAP110_V4
EAP115_V1, EAP115_V2 EAP115_V4
EAP225_V1, EAP225_V2 EAP225_V3
EAP225-Outdoor_V1
EAP110-Outdoor_V1 EAP110-Outdoor_V3
EAP245_V1 EAP245_V3
EAP115-Wall_V1 (EAP115-Wall is suitable for EU version only)
EAP225-Wall_V2 
EAP320_V1 EAP320_V2
EAP330_V1 EAP330_V2

Bug Fixed:
1. Fixed the XSS attack vulnerability

Notes:
1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
 
發佈日期: 2020-12-25 語言: 英語 檔案大小: 124.47MB
作業系統: Windows 7/8/10/Server

Bundled Firmware:
EAP110_V1, EAP110_V2 EAP110_V4
EAP115_V1, EAP115_V2 EAP115_V4
EAP225_V1, EAP225_V2 EAP225_V3
EAP225-Outdoor_V1
EAP110-Outdoor_V1 EAP110-Outdoor_V3
EAP245_V1 EAP245_V3
EAP115-Wall_V1 (EAP115-Wall is suitable for EU version only)
EAP225-Wall_V2 
EAP320_V1 EAP320_V2
EAP330_V1 EAP330_V2

Bug Fixed:
1. Fixed the XSS attack vulnerability

Notes:
1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
發佈日期: 2020-12-11 語言: 英語 檔案大小: 59.91 MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to manage TL-SL2428P(UN) 4.20.

2. Optimize the protocol for the device reporting information of rate/duplex capability.

3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.

4. Add the batch cancelling of devices migration in the migration function.

5. Vulnerability optimization

 

Bug Fixed:

1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.

2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.

3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.

4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.

5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.

6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.

7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time.

8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.

 

 
發佈日期: 2020-12-11 語言: 英語 檔案大小: 58.42 MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to manage TL-SL2428P(UN) 4.20.

2. Optimize the protocol for the device reporting information of rate/duplex capability.

3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.

4. Add the batch cancelling of devices migration in the migration function.

5. Vulnerability optimization

 

Bug Fixed:

1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.

2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.

3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.

4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.

5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.

6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.

7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time.

8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian.

6. You may need to save the backup file and uninstall the old Omada Controller before installing this software.

 
發佈日期: 2020-12-11 語言: 英語 檔案大小: 90.11 MB
作業系統: Win7/8/10/Server

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Supported device models and firmware:
EAP:
EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above
EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above
EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above
EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above
EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above
EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above
EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above
EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above
EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1


Switch:
TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1,TL-SL2428P(UN) 4.2


Gateway:
TL-R605_V1, TL-ER7206_V1

New Feature/Enhancement:
1. Support to manage TL-SL2428P(UN) 4.20.
2. Optimize the protocol for the device reporting information of rate/duplex capability.
3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.
4. Add the batch cancelling of devices migration in the migration function.
5. Vulnerability optimization

Bug Fixed:
1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.
2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.
3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.
4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.
5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.
6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.
7. Fixed the bug that the expiration time of Facebook authentication in “hotspot->authorized clients” is inconsistent with the actual expiration time.
8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP. 
發佈日期: 2020-11-10 語言: 英語 檔案大小: 59.89 MB
作業系統: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to import the SSL certificate of PFX format. 

2. Support to create of up to 1000 sites.

3. Support arbitrary adjustment of logo display and closing logo.

4. Support to paste the IP address for everywhere there is IP setting.

5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.

6. Support to print all unused voucher codes. 

7. Support to delete the archived alert log and event log.

8. Support to export device list, client list, etc. in Export Data function. 

9. Support to drag and drop card adjust the dashboard display.

10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.

11. Add Past Connection page in the Insight menu.

12. Improve the MAP topology display.  

 

Bug Fixed:

1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.

2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.

3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.

4. Fixed the bug that the cutout logo will show a black background.

5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.

 
發佈日期: 2020-11-03 語言: 英語 檔案大小: 90.09 MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10

 

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to import the SSL certificate of PFX format. 

2. Support to create of up to 1000 sites.

3. Support arbitrary adjustment of logo display and closing logo.

4. Support to paste the IP address for everywhere there is IP setting.

5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.

6. Support to print all unused voucher codes. 

7. Support to delete the archived alert log and event log.

8. Support to export device list, client list, etc. in Export Data function. 

9. Support to drag and drop card adjust the dashboard display.

10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.

11. Add Past Connection page in the Insight menu.

12. Improve the MAP topology display.  

 

Bug Fixed:

1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.

2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.

3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.

4. Fixed the bug that the cutout logo will show a black background.

5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to Omada APP of version 3.0.X or above.
發佈日期: 2020-07-13 語言: 英語 檔案大小: 55.11 MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

 

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.
發佈日期: 2020-07-13 語言: 英語 檔案大小: 56.54 MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

 

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.

5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.
發佈日期: 2020-07-06 語言: 英語 檔案大小: 86.72 MB
作業系統: Windows 7/8/10/Server

If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

 

New Feature/Enhancement:

1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. This version of controller is applied to Omada APP of version 3.0.X or above.
發佈日期: 2020-04-20 語言: 英語 檔案大小: 120.54MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
發佈日期: 2020-04-20 語言: 英語 檔案大小: 124.46MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
發佈日期: 2020-04-20 語言: 英語 檔案大小: 99.4MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
發佈日期: 2020-04-20 語言: 英語 檔案大小: 125.64MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.
發佈日期: 2020-04-09 語言: 英語 檔案大小: 99.39MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
發佈日期: 2020-04-09 語言: 英語 檔案大小: 123.36MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.
發佈日期: 2020-01-21 語言: 英語 檔案大小: 120.53MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

 
發佈日期: 2020-01-21 語言: 英語 檔案大小: 124.45MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
發佈日期: 2020-01-16 語言: 英語 檔案大小: 123.35MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

 
發佈日期: 2020-01-16 語言: 英語 檔案大小: 99.4MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
發佈日期: 2020-01-09 語言: 英語 檔案大小: 120.53MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
發佈日期: 2020-01-09 語言: 英語 檔案大小: 124.44MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
發佈日期: 2019-11-08 語言: 英語 檔案大小: 99.4MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
發佈日期: 2019-11-08 語言: 英語 檔案大小: 123.35MB
作業系統: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.
發佈日期: 2019-11-08 語言: 英語 檔案大小: 120.52MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.
發佈日期: 2019-11-08 語言: 英語 檔案大小: 124.43MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.
發佈日期: 2018-07-24 語言: 英語 檔案大小: 121.37MB
作業系統: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

 

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

 

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.
發佈日期: 2018-04-13 語言: 英語 檔案大小: 104.59MB
作業系統: Windows 7/8/10/Server

New Features/Improvements:

1.Safety performance optimization.

2.Web UI optimization.

3.Optimized the format requirement and handling mechanism for Local User Account importing files.

Bug Fixed:

1.Fixed the bug that clients may lose the authorized status in the next ten minutes, after passing the Facebook Portal authentication.

2.Fixed the bug that customer can add port number except for port 1024~65535, if customer has already added http/https prefix in the URL of Free Authentication Policy.

3.Fixed the bug that Controller will still adopt the EAP, after skipping the Select Devices process in the quick setup wizard of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.
發佈日期: 2018-02-28 語言: 英語 檔案大小: 104.73MB
作業系統: Windows 7/8/10/Server

New Features/Improvements:

1. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.)

2. RSSI (Received Signal Strength Indication) of clients will be displayed in the clients list of Omada Controller.

3. Added Historical Data Retention function to clean history and cache files of Omada Controller periodically.

4, Improved the Portal Authentication mechanism. Users who didn’t pass the authentication cannot access local network.

5. HTTPS now supports the redirection of portal authentication page.

6. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

7. Added Daily Limit function to No Authentication portal. After authentication times out, users cannot get authenticated again in one day.

8. Supports single and bulk printing of Voucher code.

9. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured.

10. Increased the synchronization update process on Omada Controller when the IP address of EAP is changed.

11. Added error messages that port is already occupied or another Controller is already running in the subnet when starting the Omada Controller.

12. Changed the name of EAP Controller to Omada Controller

Bug Fixed:

1. Added Term of Use function back in portal authentication page.

2. Fix the bug that cannot add Background Picture or Logo Picture in Portal login page when image size is less than 2MB.

3. Fix the bug that the Top-Level Domain of e-mail address cannot exceed 4 English characters.

4. Fix the bug that set Facebook Portal authentication failed when using Firefox browser with private mode and tracking protection function enabled.

5. Fix the bug that cannot login the portal authentication page after changing the default HTTP port (8088) of Omada Controller (you also need to upgrade the corresponding firmware of EAP which fixed this bug).

6. Fix the bug that cannot search the AP name with a blank in the Access Points and Clients list of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x added new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.
發佈日期: 2017-12-07 語言: 英語 檔案大小: 109.2MB
作業系統: Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

EAP發現工具

EAP發現工具可以幫助EAP控制器在L3網路中採用EAP，您還可以使用EAP發現工具尋找EAP的IP地址。

發佈日期: 2020-11-09 語言: 英語 檔案大小: 33.16 MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Support to discover the gateway and switch that support Omada SDN platform.

2. Add timeout mechanism during adopting the devices.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.
發佈日期: 2020-07-07 語言: 英語 檔案大小: 31.11 MB
作業系統: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:

1. Fully adapted to Omada SDN Controller v4.1.4.

2. Support to discover the gateway and switch that support Omada SDN platform.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.
發佈日期: 2019-06-14 語言: 英語 檔案大小: 23.54 MB
作業系統: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.
發佈日期: 2018-07-24 語言: 英語 檔案大小: 84.16 MB
作業系統: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

模擬器

韌體版本
運作模式
語言
180514(EU)
-
英語

功能過濾: 全部 EAP AdoptionPortalManagementQuick StartConfigurationConfiguration Example

問與答(Q&A)

功能設定指南

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

訂閱TP-Link認真對待您的隱私。 有關TP-Link隱私慣例的更多詳細信息，請參閱TP-Link的隱私政策。

關注我們

關於我們
新聞中心
購買地點
學習中心
台灣地區 / 繁體中文
版權所有©2021 TP-Link Corporation Limited.保留所有權利。

From United States?

Check products and services for your region.

Go Other Option