802.1X使用者端

TP-LINK_802.1X_Client_Software

下載
發佈日期: 2017-09-05 語言: 英語 檔案大小: 5.5MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10

常見問題

韌體

韌體更新可以解決前版韌體可能有的一些問題並改善它目前的效能。

若要更新

重要:若要防止韌體升級失敗,請在繼續在升級程序前閱讀以下內容

  • 請在您購買地點的當地官方網站下載韌體並對您的TP-Link設備進行升級,否則將違反保固條款。如果有需要,請點選 這裡 以變更網站。
  • 為了合適的韌體版本,請確認您設備目前的硬體版本。錯誤的韌體更新可能會損壞您的設備並使保固失效。( 一般來說,V1.x=V1)
  • 非常重要,更韌體升級期間請勿關閉設備的電源, 因為這很可能會導致產品的永久性損壞。
  • 除非在TP-Link設備沒有LAN/Ethernet連接埠的狀況下,否則請不要使用無線連接更新韌體。對於LTE-MiFi,建議您透過USB連接埠進行升級。
  • 建議您停止電腦上所有的網際網路應用程式,或在升級前簡單地中斷網際網路線路即可。
  • 在升級前請使用解壓縮軟體,例如:WinZIP 或 WinRAR 解壓縮您下載的檔案。

T1600G-28TS(UN)_V3_20200805

下載
發佈日期: 2020-09-22 語言: 英語 檔案大小: 8.54 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.


Notes:
1. For T1600G-28TS(UN) V3.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.   
 

T1600G-28TS(UN)-V3-20200109

下載
發佈日期: 2020-03-27 語言: 英語 檔案大小: 9.36 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-28TS(UN) V3.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-28TS(UN)_V3_20190516

下載
發佈日期: 2019-07-17 語言: 英語 檔案大小: 9.06 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T1600G-28TS(UN) V3.0.

若要在TP-Link產品上使用第三方韌體

一些TP-Link產品的官方韌體可以被第三方韌體替換,例如:DD-WRT。TP-Link沒有義務提供任何維護或支持,也不保證第三方固件的性能和穩定性。使用第三方韌體後,將使產品的保固失效。

供程式人員的開放原始碼(GPL)

請注意:TP-Link的產品部分包含由第三方開發的程式碼,包括:受GNU通用公共許可證(“GPL”),版本1 /版本2 /版本3或GNU較寬鬆通用公共許可證(“LGPL”)制約的程式碼。您可以使用相應的軟體條件來遵循GPL許可條款。

在此您可以查看、列印與下載對應的GPL許可條款。 您將收到TP-Link產品中用於直接下載的相關軟件的GPL原始以及進一步的資訊,包含在GPL碼中心下包含GPL程式碼的TP-Link軟體列表。

各自的程序分發沒有任何擔保; 甚至沒有對適銷性或特定用途的適用性的暗示保證。請參閱各自的GNU通用公共許可證了解更多詳情。

模擬器

韌體版本
運作模式
語言
180130
-
英語

註:

1. 此模擬器是虛擬的設定頁面,您可以體驗設定 TP-Link 產品的畫面。

2. 模擬器頁面可能與最新的韌體版本頁面不同。

3. 顯示的功能僅供參考,某些功能可能受當地法規而限制使用。若需要更多資訊,請參考產品規格表(datasheet)或產品頁面。

來自 United States?

取得您的地區產品、活動和服務。