1.0_Overview_01_normal_1595313904832r.jpg)
1.0_Overview_02_normal_1595313911423f.jpg)
1.0_Overview_03_normal_1595313918740t.jpg)
1.0_Overview_04_normal_1595313927001t.jpg)
1.0_Overview_05_normal_1595313935846v.jpg)
1.0_Overview_06_normal_1595313946522w.jpg)
1.0_Overview_07_normal_1595313954386o.jpg)
1.0_Overview_08_normal_1595313962958r.jpg)
1.0_Overview_01_thumb_1595313904832g.jpg)
1.0_Overview_02_thumb_1595313911423b.jpg)
1.0_Overview_03_thumb_1595313918740q.jpg)
1.0_Overview_04_thumb_1595313927001d.jpg)
1.0_Overview_05_thumb_1595313935846h.jpg)
1.0_Overview_06_thumb_1595313946522q.jpg)
1.0_Overview_07_thumb_1595313954386e.jpg)
1.0_Overview_08_thumb_1595313962958q.jpg)
1.0_Overview_01_large_1595313904832w.jpg)
1.0_Overview_02_large_1595313911423u.jpg)
1.0_Overview_03_large_1595313918740r.jpg)
1.0_Overview_04_large_1595313927001g.jpg)
1.0_Overview_05_large_1595313935845l.jpg)
1.0_Overview_06_large_1595313946522l.jpg)
1.0_Overview_07_large_1595313954386x.jpg)
1.0_Overview_08_large_1595313962958k.jpg)
16-Port 10/100 Mbps + 2-Port Gigabit Rackmount Switch with 16-Port PoE+
- 16× PoE+ 10/100 Mbps RJ45 ports, 2× Gigabit RJ45 ports, and 1× combo Gigabit SFP slot.
- High PoE power budget with up to 30 W for each PoE port and 150 W for all PoE ports.*
- Up to 250 m data and power transmission under extend mode specially designed for surveillance system.**
- Priority mode for ports 1–8 to guarantees the quality of sensitive applications like video monitor.
- Isolation Mode allows one-click client traffic separation for higher security and performance.
- Easy to use, with no configuration and installation needed.
Dedicated 16-Port PoE+ Switch (150 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 150 W PoE power budget* for the 16× PoE+ ports makes it has wide range of applications, such as surveillance, offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.
Up to 30 W on Each Port
Total 150 W Power Budget
Ideal for IP Surveillance—Up to 250 m Transmission
With extend mode, the PoE transmission distance reaches up to 250 m**—perfect for IP Camera deployment in large areas.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
Ideal for IP Surveillance—Higher Performance and Security
Priority Mode and Isolation Mode make surveillance smoother and safer.
-
Priority Mode
ButtonPriority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1–8 when one-touch Priority Mode is on.
-
Isolation Mode
ButtonOne-Click Traffic Separation for Ports 1-16
With one click, Isolation Mode easily divides traffic for ports 1–16 to avoid snooping and tampering. This enables the switch to isolate broadcast storm, improving LAN security and data transmission.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
150 W
Intelligent Power Management to Prevent Power Overload
When your total power consumption exceeds 150 W, Intelligent Power Management automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply. This protects the device from power overload operation. It also automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.
Smooth HD Video Monitoring
2× gigabit RJ45 ports and 1× combo gigabit SFP slot ensure smooth streaming even when 16× HD IP cameras work simultaneously.
Gigabit SFP Ports
Plug and Play, No Configuration Required
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
TL-SL1218P
-
Enjoy
| DONANIM ÖZELLİKLERİ | |
|---|---|
| Arabirim | • 16× PoE+ 10/100 Mbps RJ45 Ports• 2× 10/100/1000 Mbps RJ45 Ports• 1× Combo Gigabit SFP Slot |
| Ağ Medyası | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-X MMF, SMF |
| Fan Sayısı | 2 Fans |
| Fiziksel Güvenlik Kilidi | Yes |
| Güç Kaynağı | 100–240V AC, 50/60 Hz |
| PoE+ Portları (RJ45) | • Standard: 802.3at/802.3af compliant• PoE Ports: Ports 1–16• PoE Power Budget: 150 W |
| Boyutlar ( W X D X H ) | 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) |
| Maks. Güç Tüketimi | • 12.71 W (220/50Hz. no PD connected)• 172.8 W (220/50Hz. with 150 W PD connected) |
| Max Heat Dissipation | • 43.34 BTU/h (no PD connected)• 589.25 BTU/h (with 150 W PD connected) |
| PERFORMANS | |
|---|---|
| Anahtarlama Kapasitesi | 7.2 Gbps |
| Paket Yönlendirme Hızı | 5.36 Mpps |
| MAC Adres Tablosu | 8K |
| Jumbo Frame | 10 KB |
| YAZILIM ÖZELLİKLERİ | |
|---|---|
| Gelişmiş Özellikler | • Compatible With IEEE 802.3at/af Compliant PDs• Extend Mode (Up to 250m PoE power supply and data transmission)• Priority Mode• Isolation Mode• Mac Address Auto-Learning And Auto-Aging• IEEE802.3x Flow Control |
| İletim Metodu | Store-And-Forward |
| DİĞERLERİ | |
|---|---|
| Sertifika | CE, FCC, RoHS |
| Paket İçeriği | • TL-SL1218P• Power Cable• Installation Guide• Two mounting brackets and the fittings |
| Ortam | • Operating Temperature: 0–50 °C (32–122 °F)• Storage Temperature: -40–70 °C (-40–158 °F)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10 Mbps. Actual transmission distance may vary from the quality of the cables.