Download for EAP772
คำถามที่พบบ่อย
- How to configure MLO SSID of AP on Omada Controller
- Understanding and implementing Minimum RSSI
- Getting started with 6GHz
- How to configure Mesh & Auto Failover on Omada Controller
- Troubleshooting guide of Omada AP Mesh network
- How to configure guest network on Omada Controller
- Typical SSH commands for Omada AP troubleshooting
- Troubleshooting: AP goes offline abnormally
- How to configure 802.11r to speed up the roaming process
- How to configure Multicast Filtering on Omada Controller
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- What can I do If Omada App can’t find my AP
- Troubleshooting for Wireless Client Cannot Access the Internet
- How to use Bonjour Related Functions of Omada AP on Omada Controller
- How to configure Lock to AP on Omada Controller
- Unable to connect to EAP WiFi
- วิธีเพิ่มประสิทธิภาพประสิทธิภาพ ของ wireless ใน product EAP
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
EAP772(EU)_V1_1.0.13 Build 20240402 |
ดาวน์โหลด | |
---|---|---|
วันที่เผยแพร่: 2024-05-31 | ภาษา: ภาษาอังกฤษ | ขนาดไฟล์: 25.29 MB |
Recommended Controller Software Version: Omada Controller v5.9 or above |
EAP772(US)_V1_1.0.13 Build 20240402 |
ดาวน์โหลด | |
---|---|---|
วันที่เผยแพร่: 2024-05-31 | ภาษา: ภาษาอังกฤษ | ขนาดไฟล์: 25.29 MB |
Recommended Controller Software Version: Omada Controller v5.9 or above |
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
แอปฯ
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.