-
For Home
Easy ways to expand and enhance your network
Keeping your home wired for quality connections
Everything else you need for a connected lifestyle
-
Smart Home
Keeping an eye on what matters
Smarten up your home devices
Light for every occasion
-
For Business
The smarter cloud solution for business networking
Professional business Wi-Fi with centralized management
High-Speed wired networking from L3 managed to unmanaged
Ideal for long range wireless broadband networking
Secure VPN and Load Balance gateways to the business
VIGI video surveillance is dedicated to your security
-
Service Provider
Capable of high-speed network and integrated broadband applications
Maintains internet access wherever you go.
The leading technology for delivering gigabit Internet services
Transforms electrical wiring to carry the network signal.
Easily expand your Wi-Fi coverage.
Boosts your business network with premium performance.
Takes your enterprise Wi-Fi to new levels.
How to reset the switch to the default factory settings using PuTTy?
52755 For the switches without the Reset button, you can use reset command in privileged EXEC mode to restore the system. If you have forgotten the username or password, please use the PuTTy to reset it.
To reset the switch to the default factory settings by PuTTY, follow these steps:
1. Go to the website https://www.putty.org/ to download PuTTY on the PC. Connect your PC to the Console port of the switch with a serial cable. Power off the switch.
2. Start puTTy on the PC and configure the terminal emulation program as follows:
Ÿ Baud Rate: 38400bps
Ÿ Data Bits: 8
Ÿ Parity: None
Ÿ Stop Bits: 1
Ÿ Flow Control: None
Click on Session, change Speed and Serial line as below, and then click on Open button.
You will see this window displayed.
3. Power on the switch. Press any key to stop autoboot when you see this window below:
The bootUtil menu will appear:
4. Enter the corresponding number of the Reset option, which is 2 in this example, and enter Y to confirm the choice. The switch will restore to its default factory settings and reboot.
5. Log in to the switch again. The default username and password are both admin.
Your feedback helps improve this site.
SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.