Download for TL-SG3210
>How to find the hardware version on a TP-Link device?
FAQs
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI?
- How to reset JetSteam (TM) series switches to factory default by using Hyper Terminal?
- How to test the Jumbo Frame pass-through feature on TP-Link switches?
- How to configure RSTP on TP-Link switches using the old GUI?
- How to Access TP-Link Managed Switches via Console Port?
- How to change the IP address of the smart and managed switches using the old GUI and CLI?
- How to configure LACP on our Smart/ Managed Switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to build up an 802.1X access authentication system using TP-Link switch?
- What is the Console Cable and the line sequence of it?
- How to configure MAC ACL on Smart/Managed switch?
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser?
- How to configure port security function?
- How to configure IGMP Snooping for IPTV network using L2 switch?
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches?
- How to configure Extended IP ACL
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
Published Date: 2021-02-09 | Language: English | File Size: 90.12 MB |
Operating System: Windows 7/8/10/Server |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. |
Published Date: 2021-02-09 | Language: English | File Size: 59.91 MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. 6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian. |
Published Date: 2021-02-09 | Language: English | File Size: 58.43 MB |
Operating System: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian. 6. You may need to save the backup file and uninstall the old Omada Controller before installing this software. |
MIBs Files
Published Date: 2021-01-19 | Language: English | File Size: 186.96 KB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.