What Should I do if the Water Pump of the Robot Vacuum Reports Errors?
Troubleshooting
Дата последнего обновления: 01-31-2023 07:40:22 AM
5456
5456 Эта статья подходит для:
You may try the following steps, here takes Tapo RV10 Plus as a demonstration.
1. Take out the dustbin and water tank, then clean the water tank.
Wipe the metal contacts with a clean, dry cloth before re-installing the dustbin and water tank.
Wet and dirty contacts may cause water pump errors.
2. Try to restart the robot vacuum after cleaning.
If the problem still persists, please Contact Support.
Был ли этот FAQ полезен?
Ваш отзыв поможет нам улучшить работу сайта.
