-
Для дома
Коммутаторы SOHO
Качественные проводные подключения для дома
Wi-Fi адаптеры
Создайте Wi-Fi на устройствах, у которых нет встроенного Wi‑Fi
Аксессуары
Всё остальное, что может пригодиться, чтобы оставаться на связи
-
Умный дом
Облачные камеры
Будьте в курсе всего происходящего
Умные розетки
Сделайте свой дом чуточку умнее
Умные лампы
Освещение на любой вкус и цвет
-
Для бизнеса
Коммутаторы JetStream
Высокоскоростное проводное подключение
Облако Omada SDN
Умное облачное решение для бизнеса
Wi-Fi оборудование Pharos
Решение для Wi-Fi сетей с большим радиусом действия
Маршрутизаторы SafeStream
Шлюзы для бизнеса с VPN и балансировкой нагрузки
-
Для операторов связи
Коммутаторы
Максимум производительности для сетей предприятий
Wi-Fi роутеры
Надёжный выбор для домашней сети
How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
This document is suitable for Omada Controller V2.5.4 or above. For Omada Controller V4.1.5 or above, please refer to FAQ 2915.
Introduction
This document introduces how to configure Omada Controller as a Windows Service by using NSSM.
Prerequisites
1. A computer with the Omada Controller installed already.
2. Download the NSSM – the Non-Sucking Service Manager (https://nssm.cc/download)
Procedures
1. Extract nssm.exe to a convenient location, here I use “C:\Program Files (x86)\TP-LINK” as e xample.
2. Make sure you have ran Omada Controller before, or you can just keep Omada Controller running during this operation.
3. Run Windows Command Line as administrator and cd to the path you placed nssm.exe. Here is the C:\Program Files (x86)\TP-LINK.
4. Type nssm install “Omada Controller” to create a new Service using nssm.
Set the following parameters as listed below:
Application
Path:
C:\Program Files (x86)\TP-LINK\EAP Controller\jre\bin\java.exe
Startup directory:
C:\Program Files (x86)\TP-LINK\EAP Controller\jre\bin\
Arguments:
-server -Xms128m -Xmx1024m -XX:MaxHeapFreeRatio=60 -XX:MinHeapFreeRatio=30 -XX:+HeapDumpOnOutOfMemoryError -Deap.home="C:\Program Files (x86)\TP-LINK\EAP Controller" -cp "C:\Program Files (x86)\TP-LINK\EAP Controller\lib\*" com.tp_link.eap.start.EapMain
Details
Display name:
Omada Controller by default
Description:
Add one if you want
Startup type:
Automatic
Log on
Local System account and select “Allow service to interact with desktop”
Environment
set scriptDir="C:\Program Files (x86)\TP-LINK\EAP Controller\bin"
set eapHome="C:\Program Files (x86)\TP-LINK\EAP Controller"
JAVA_HOME="%eapHome%\jre"
PATH=%JAVA_HOME%\bin;%path%
5. Click Install service and will show you the successful note.
6. After the Omada Controller service is successfully set up, please restart your computer and the Omada Controller service will startup automatically. Please check on Windows Task Manager to see if the java.exe and mongod.exe are running properly. Then you can type http://127.0.0.1:8088 or https://127.0.0.1:8043 to login to the Omada Controller’s Web management page.
Note:
1. It is not recommended that you put nssm.exe in the installation path of the Controller, otherwise it will disappear when you upgrade the Omada Controller.
2. When you are going to update the Controller, please remember to stop the service first, or the process will be denied.
3. Run Windows Command Line as administrator and and cd to the path you placed nssm.exe. Type in the following commands to manage the service.
(1) nssm edit “Omada Controller”
(2) nssm start “Omada Controller”
(3) nssm stop “Omada Controller”
(4) nssm restart “Omada Controller”
(5) nssm status “Omada Controller”
(6) nssm remove “Omada Controller”
Ваш отзыв поможет нам улучшить работу веб-сайта.