Загрузить для EAP245 V3

Выберите аппаратную версию:

V3

>Как узнать версию устройства TP-Link?

Доступность модели и аппаратной версии может изменяться в зависимости от региона. Не забудьте подтвердить указанные данные при рассмотрении вопроса о покупке.
Обзор продукции
Документация

Видео по настройке

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Открыть

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Открыть

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Открыть

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Открыть

  • A Quick Overview of EAP Management Methods

    This video will introduce how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are three most common Scenarios:
    • Manage one or two EAPs locally
    • Manage three or more EAPs locally
    • Manage EAPs remotely via the cloud
    To choose the optimum management method, consider the following three questions:
    1. Choose Standalone mode or Controller mode for management?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Controller Software?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Открыть

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Открыть

FAQ

Программное обеспечение

Обновление ПО способно решить проблемы предыдущих программных версий и улучшить текущую работу устройства. 

ДЛЯ ОБНОВЛЕНИЯ

ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления.

  • Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)

НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.

  • НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
  • НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
  • Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением. 

Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.

Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала

EAP245(EU)_V3_190530
Дата публикации: 2019-07-09 Язык: Английский Размер файла: 7.66 MB

Recommended Controller Software Version: Omada Controller v3.1.x or above

 

New Feature/Enhancement

1. Add Radius Accounting to External Radius Server in standalone mode.

2. Add SSID Radius accounting to WPA-Enterprise security mode.

3. Add SSL encryption in Auto Mail of Log Settings.

4. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4.

5. Support SSID MAC Authentication to none security mode with Controller 3.1.4.

6. Support channel utilization function with Controller 3.1.4.

7. Support Layer-3 Accessibility in SSH with Controller 3.1.4.

8. Change the rule of the LED when resetting/rebooting EAP.

9. Support UTF8 in SSID character.

10. Optimize Band Steering feature.

 

Bug Fixed:

1. Fixed the bug that the client rate limit doesn't take effect under batch configuration.

2. Fixed the bug that clients cannot access tplinkeap.net in a mixed network of IPv4 and IPv6.

3. Fixed the bug that clients maybe disconnected when enabling Airtime Fairness in 2.4G frequency.

4. Fixed the bug that some SSIDs cannot broadcast when restoring the configuration on the Controller.

 

Notes:

1. For EAP245 v3 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

EAP245(EU)_V3_2.1.0 Build 20181107
Дата публикации: 2018-12-07 Язык: Английский Размер файла: 9.05 MB

Recommended Controller Software Version: Omada Controller v 3.0.x or above

New Feature/Enhancement:

Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode.

 

Bug Fixed:

Fixed the bug that the client list in controller doesn’t update timely when the client roams to a new SSID, which will cause the downlink speed limit function become invalid.

 

Notes:

1. For EAP245_V3 only.

2. Your device's configuration won't be lost after upgrading.

EAP245(EU)_V3_2.0.0 Build 180601
Дата публикации: 2018-08-24 Язык: Английский Размер файла: 8.99 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

New Features:
1. First firmware released for EAP245_V3.
2. Support Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.
3. Support Omada APP management method.

Notes:
1. For EAP245 (EU)_V3 only.
2. Your device's configuration won't be lost after upgrading

Использование стороннего ПО на устройствах TP-Link

Официальное программное обеспечение устройств TP-Link может быть заменено на стороннее, например, на DD-WRT. TP-Link не обязан предоставлять сервисную или техническую поддержку для устройств со сторонним ПО и не гарантирует его стабильную работу. Ущерб, нанесённый устройству в результате использования стороннего ПО, аннулирует его гарантию.  

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет значимость для большинства конечных пользователей продукции TP-Link.

Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с Универсальной общественной лицензией GNU (GPL) версии 1/версии 2/версии 3 или в соответствии со Стандартной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Вы можете  просмотреть, распечатать и загрузить соответствующие условия лицензии GPL здесь.  В Центре исходных кодов GPL вы получаете для загрузки исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL. 

Программный контроллер

Дата публикации: 2019-07-04 Язык: Английский Размер файла: 120.29MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Дата публикации: 2019-07-04 Язык: Английский Размер файла: 124.2MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Дата публикации: 2019-05-28 Язык: Английский Размер файла: 102.8MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

Дата публикации: 2019-05-28 Язык: Английский Размер файла: 129.13MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

8. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Дата публикации: 2019-05-15 Язык: Английский Размер файла: 123.26MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Дата публикации: 2019-05-15 Язык: Английский Размер файла: 127.16MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Дата публикации: 2019-03-25 Язык: Английский Размер файла: 102.73MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

8. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

9. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

10. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

11. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

12. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

13. Channel utilization will take effect only with new firmware.

Дата публикации: 2019-03-25 Язык: Английский Размер файла: 129.07MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. This version software needs you to install manually via curl command.

8. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

9. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

10. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

11. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

12. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

13. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

14. Channel utilization will take effect only with new firmware.

 

Дата публикации: 2019-03-08 Язык: Английский Размер файла: 123.6MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Дата публикации: 2019-03-08 Язык: Английский Размер файла: 127.5MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Дата публикации: 2018-11-08 Язык: Английский Размер файла: 102.25MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Дата публикации: 2018-11-08 Язык: Английский Размер файла: 122.14MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Дата публикации: 2018-11-08 Язык: Английский Размер файла: 126.05MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Дата публикации: 2018-11-08 Язык: Английский Размер файла: 127.91MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as (!@#$%^&*).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Дата публикации: 2018-09-05 Язык: Английский Размер файла: 102.27MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (When you are using External RADIUS Server Portal function with External Web Portal)

7. Batch Upgrade function now will only take effect to EAP which belong to the current site.

8. UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9. Start Omada Controller via jsvc to realize Root Privilege separation function. (For deb installation package, it will create a non-root account called omada to run Omada Controller in default.

10. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Дата публикации: 2018-09-05 Язык: Английский Размер файла: 128.47MB
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Start Omada Controller via jsvc to realize Root Privilege separation function. (For tar.gz installation package, Omada Controller will be operated in root mode. But you can modify the OMADA_USER in bin/control.sh to assign another non-root account to run Omada Controller instead.)

7. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Дата публикации: 2018-08-17 Язык: Английский Размер файла: 122.13MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Дата публикации: 2018-08-17 Язык: Английский Размер файла: 126.04MB
Операционная система : Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Дата публикации: 2017-12-07 Язык: Английский Размер файла: 109.2MB
Операционная система : Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Утилита обнаружения EAP

Дата публикации: 2019-06-14 Язык: Английский Размер файла: 23.54 MB
Операционная система : WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Дата публикации: 2018-07-24 Язык: Английский Размер файла: 84.16 MB
Операционная система : Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Дата публикации: 2016-11-08 Язык: Английский Размер файла: 3.39MB
Операционная система : WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Modifications and Bug Fixes:

Первый выпуск утилиты Обнаружения.

Notes:

Для серии EAP , включая EAP110, EAP115, EAP120, EAP220, EAP320, EAP330,EAP245,и т.д.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

Код GPL

Эмуляторы

Версия прошивки
Working Mode
Язык
180420(EU)
-
Английский
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: