Загрузить для EAP110-Outdoor
>Как узнать версию устройства TP-Link?
- Product Overview
Setup Video
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Узнать больше
FAQ
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- Troubleshooting of Wireless Issues for Omada EAP Products
- Как управлять по интернету точками доступа EAP, расположенными в разных локациях, с помощью контроллера Omada (через проброс портов NAT контроллера с помощью DHCP‑опции 138)? [старый интерфейс]
- Как управлять по интернету точками доступа EAP, расположенными в разных локациях, с помощью контроллера Omada (через проброс порта NAT контроллера с помощью утилиты обнаружения точек доступа EAP)? [старый интерфейс]
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Как настроить сеть на базе точек доступа серии EAP и EAP Software Controller, для средних и больших объектов.
- How to choose EAP products
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- What is TP-Link EAP Beamforming?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- Common questions about TP-Link EAP device when it’s used in home network
- Пример применения функции контроля доступа на EAP контроллере версии 2.2.3
- What if I forget the password of EAP Controller?
- What is TP-Link EAP/CAP MU-MIMO?
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- The Requirements of Establishing an External Portal Server (above Omada Controller 2.6.0)
- Для чего нужна функция Fast Roaming (быстрого или бесшовного роуминга) в Wi-Fi оборудовании TP-Link?
- How to adopt EAP in Controller Mode?
- Q&A for TP-Link Omada App
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138)? (New UI)
- Do I need to keep controller running when using portal authentication?
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs?
- How to manage EAPs in different VLANs using Omada Controller? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility)? (New UI)
- Наиболее часто задаваемые вопросы по устройствам серии EAP
- Часто задаваемые вопросы о наружных точках доступа серии EAP
- How to view detailed client information of an EAP?
- How to set up rate limit through EAP controller
- What Is the Difference Between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- How to configure the WLAN Group function on the Software Controller (or OC200)
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- Как настроить функцию «Портал аутентификации» в Утилите настройки EAP (EAP Controller)
- How to optimize wireless performance of EAP products
- Will the Configuration Still Work with EAPs When the Omada Controller Goes Offline?
- How to Configure Voucher Authentication on Omada Controller?
- How to set up different SSIDs and Passwords for each EAP through EAP Controller?
- Source code template for External Web Portal (Controller 3.0.5 or below)
- The Requirements of Establishing an External Portal Server (below Omada Controller 2.5.4)
- What Can I Do If I Fail to Log In to the EAP via the Domain Name?
- Source code template for External Web Portal (Standalone Mode)
- What should I do if I got a certificate error?
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Language of the Printed Voucher Code?
- How to Configure Load Balance Omada Controller?
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller?
- How do I upgrade the firmware of my EAP device via web browser?
- How do I find the firmware version of my EAP device?
- How to configure free authentication policy on EAP Controller
- What is TP-Link EAP/CAP Airtime Fairness?
- How to Configure Band Steering on TP-Link Omada Controller?
- What should be noticed when running the EAP Controller for the first time?
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- How to deploy EAP controller on a private cloud (AWS EC2)?
- How to build a Wireless Network for School Canteen using tp-link products?
- How to build a Wireless Network for Chain Store using tp-link products?
- How to build a Factory Network using TP-Link products?
- How to build a Wireless Network for Shopping Mall using tp-link products?
- How to build a Wireless Network for Dormitory using tp-link products?
- How to build a Network for Restaurant & Cafe using tp-link products?
- How to build a Campus Network using TP-LINK products?
- How to Manage EAPs at Different Locations
- How to Change the Default Ports for EAP Controller?
- Hotspot authentication for multiple subnet with different VLANs
Программное обеспечение
Обращаем ваше внимание, что обновление прошивок с русскоязычной версией (RU) возможно только на русскоязычную (RU => RU) , а с европейской (EU) только на европейскую (EU => EU). Изменить прошивку с русскоязычной на европейскую или обратно НЕВОЗМОЖНО!!! RU ≠> EU ; EU ≠> RU !
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления.
- Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
EAP110-Outdoor(EU)_V1_1.2.0 Build 20180418 | |||
---|---|---|---|
Дата публикации: 2018-04-28 | Язык: Английский | Размер файла: 7.06 MB | |
|
EAP110-Outdoor(EU)_V1_170914 | |||
---|---|---|---|
Дата публикации: 2017-09-17 | Язык: Английский | Размер файла: 6.79 MB | |
|
EAP110-Outdoor(EU)_V1_160923 | |||
---|---|---|---|
Дата публикации: 2016-09-23 | Язык: Английский | Размер файла: 6.74 MB | |
|
Использование стороннего ПО на устройствах TP-Link
Официальное программное обеспечение устройств TP-Link может быть заменено на стороннее, например, на DD-WRT. TP-Link не обязан предоставлять сервисную или техническую поддержку для устройств со сторонним ПО и не гарантирует его стабильную работу. Ущерб, нанесённый устройству в результате использования стороннего ПО, аннулирует его гарантию.
Открытый исходный код для программистов (GPL)
Следующая информация предназначена для программистов и не представляет значимость для большинства конечных пользователей продукции TP-Link.
Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с Универсальной общественной лицензией GNU (GPL) версии 1/версии 2/версии 3 или в соответствии со Стандартной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.
Вы можете просмотреть, распечатать и загрузить соответствующие условия лицензии GPL здесь. В Центре исходных кодов GPL вы получаете для загрузки исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL.
Программный контроллер
The EAP Controller is used to manage multiple EAPs intensively.
Дата публикации: 2020-12-25 | Язык: Английский | Размер файла: 125.65MB |
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x и Fedora 20 или выше |
||
Прошивка для устройств: Исправленные ошибки: Примечания: |
Дата публикации: 2020-12-25 | Язык: Английский | Размер файла: 99.43MB |
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x и Fedora 20 или выше |
||
Прошивка для устройств: Исправленные ошибки: Примечания: |
Дата публикации: 2020-12-25 | Язык: Английский | Размер файла: 120.55MB |
Операционная система : Windows 7/8/10/Server |
||
Прошивка для устройств: Исправленные ошибки: Примечания: |
Дата публикации: 2020-12-25 | Язык: Английский | Размер файла: 124.47MB |
Операционная система : Windows 7/8/10/Server |
||
Прошивка для устройств: Исправленные ошибки: Примечания: |
Дата публикации: 2020-01-16 | Язык: Английский | Размер файла: 99.4MB |
Операционная система : Ubuntu 14.04/16.04/17.04/18.04. |
||
Прошивка для моделей: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall походит только для версии ЕС)
Новые функции и улучшения: 1. Изменён механизм подключения EAP — теперь контроллер сохраняет IP-конфигурацию EAP в режиме Standalone. 2. Теперь несколько контроллеров Omada могут работать в одной и той же подсети. 3. Добавлена кнопка «Запустить контроллер Omada после установки», по умолчанию отмеченная галочкой. 4. Максимальное количество связанных клиентов в балансировке нагрузки увеличено до 255. 5. Оптимизирован пользовательский интерфейс раздела «Использование канала». 6. Оптимизирована страница аутентификации портала. 7. Теперь External Portal Server поддерживает URL с параметрами.
Исправлены ошибки: 1. Исправлена ошибка, при которой страница MAC-фильтров могла отображать не все группы, когда количество групп превышало 5. 2. Исправлена ошибка, при которой после удаления сайта ваучер-код и локальный пользователь сайта по-прежнему существовали. 3. Исправлена ошибка, при которой конфигурация сайта не восстанавливалась, когда импортируемый сайт содержал тот же ваучер-код, что и текущий контроллер. 4. Исправлена ошибка, из-за которой во время обновления при отключении точки доступа Mesh, контроллер мог перестать обновлять другие точки доступа и выдавал сообщение: «Другие точки доступа обновляются». 5. Исправлена ошибка пользовательского интерфейса портала, из-за которой при загрузке фото была некликабельной кнопка «Применить».
Примечания: 1. Чтобы использовать новые функции контроллера Omada 3.2.X, необходимо обновить прошивку EAP до соответствующей версии. 2. Контроллер Omada должен использовать системную команду netstat. Если в системе Linux нет установленных сетевых инструментов (содержащих команду netstat), возможно, программа не будет нормально работать. 3. Поддержка ОС Linux 64-бит, в том числе Ubuntu 14.04/16.04/17.04/18.04. 4. Встроенная среда Java JRE 1.8. 5. После обновления до данной версии контроллера Omada, вернуться к более ранней версии будет невозможно. 6. Конфигурация портала будет утеряна после обновления до контроллера Omada Controller 3.2.X с версии 2.4.X или более ранних версий. |
Дата публикации: 2020-01-09 | Язык: Английский | Размер файла: 124.44MB |
Операционная система : Windows 7/8/10/Server |
||
Новые функции/Улучшения: 1. Изменён механизм подключения EAP — теперь контроллер сохраняет IP-конфигурацию EAP в режиме Standalone. 2. Теперь несколько контроллеров Omada могут работать в одной и той же подсети. 3. Добавлена кнопка «Запустить контроллер Omada после установки», по умолчанию отмеченная галочкой. 4. Максимальное количество связанных клиентов в балансировке нагрузки увеличено до 255. 5. Оптимизирован пользовательский интерфейс раздела «Использование канала». 6. Оптимизирована страница аутентификации портала.
Исправлены ошибки: 1. Исправлена ошибка, при которой страница MAC-фильтров могла отображать не все группы, когда количество групп превышало 5. 2. Исправлена ошибка, при которой после удаления сайта ваучер-код и локальный пользователь сайта по-прежнему существовали. 3. Исправлена ошибка, при которой конфигурация сайта не восстанавливалась, когда импортируемый сайт содержал тот же ваучер-код, что и текущий контроллер. 4. Исправлена ошибка, из-за которой во время обновления при отключении точки доступа Mesh, контроллер мог перестать обновлять другие точки доступа и выдавал сообщение: «Другие точки доступа обновляются». 5. Исправлена ошибка пользовательского интерфейса портала, из-за которой при загрузке фото была некликабельной кнопка «Применить».
Примечания: 1. Чтобы использовать новые функции контроллера Omada 3.2.X, необходимо обновить прошивку EAP до соответствующей версии. 2. После обновления до данной версии контроллера Omada, вернуться к более ранней версии будет невозможно. 3. Конфигурация портала будет утеряна после обновления до контроллера Omada Controller 3.2.X с версии 2.4.X или более ранних версий. |
Дата публикации: 2019-07-26 | Язык: Английский | Размер файла: 99.23MB |
Операционная система : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the processing time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
|
Дата публикации: 2019-07-26 | Язык: Английский | Размер файла: 123.15MB |
Операционная система : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the processing time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first. |
Дата публикации: 2019-07-04 | Язык: Английский | Размер файла: 120.29MB |
Операционная система : Windows 7/8/10/Server |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
Дата публикации: 2019-07-04 | Язык: Английский | Размер файла: 124.2MB |
Операционная система : Windows 7/8/10/Server |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
Утилита обнаружения EAP
The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.
Дата публикации: 2019-08-06 | Язык: Английский | Размер файла: 25.85 MB |
Операционная система : WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
Bug fixed: 1. Fixed the bug that the Discovery Utility may fail to find EAPs. 2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. |
Подписаться на рассылкуМы с ответственностью относимся к вашим персональным данным. Полный текст политики конфиденциальности доступен здесь.