How to configure Bandwidth Control on 3G/4G Wireless Router TL-MR3420 (new logo)

Configuration Guide
Updated 06-27-2022 07:30:37 AM 42250
Acest ghid este valabil pentru: 

Note: TL-MR3420_V5 is used for demonstration in this article.

1. Visit http://tplinkwifi.net, and log in with the password you set for the router. For details, please refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router?

2. Go to Advanced > Bandwidth Control.

3. Enable Bandwidth Control and enter the Total Upstream Bandwidth and Total Downstream Bandwidth.

4. Click Save.

To set controlling rules:

Click Add and fill in the blanks.

IP Range: Enter the IP range of your devices that you want to apply Bandwidth Control to.

Port Range: Enter the Port range of the protocols.

Protocol: Select the protocols of services that you want to control.

Priority: Select priority from 1 to 5. 1 means the highest priority.

Upstream/Downstream: Enter the minimum and maximum upstream/ downstream bandwidth you want to allocate.

Click Save.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

A fost util acest FAQ?

Părerea ta ne ajută să îmbunătățim acest site.

Recommend Products

From United States?

Get products, events and services for your region.