How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 to work with IPoA or Static IP ?

Note: For the configuration, you should know the IP parameters, connection type, VPI/VCI number. If you are not sure about the information, contact your ISP to double check it first.

Step 1

Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1, you can check it on the bottom label of the device). Then press Enter.

Step 2

Input username and password in the login page, the default username and password both are admin, click OK to login the web page.

Step 3

Click on Quick Setup on the left side.

Step 4

Input the correct VPI and VCI value (provided by your ISP). Click on Next .

Step 5

Select IP over ATM(IPoA), and then click on Next.

Step 6

Enter WAN IP address, WAN subnet mask, Default Gateway and DNS Server, and then go to next.

All the information in this page is very important and can´t be incorrect. If you are not sure, please call your ISP to have a check.

Step 7

Click on Next.

Step 8

If your ADSL2+ modem router does not support wireless function, you can skip this step.

If you want to connect to it via wireless,select Enable Wireless and set up your wireless network:

SSID: Create your wireless network name.

Wireless Security: Choose Disable Security to leave it unsecured or WPA-PSK/WPA2-PSK to secure your wireless network and create yourpassword in the Network Key box.

Step 9

Click Save/Reboot to save the settings and restart the router.

How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 to work with IPoA or Static IP ?

NewsletterTP-Link poważnie traktuje twoją prywatność. Więcej szczegółów znajdziesz na stronie Informacja o przetwarzaniu danych osobowych.

Znajdź nas