Bezprzewodowy, wewnętrzny/zewnętrzny punkt dostępowy, standard AX3000

EAP650-Outdoor(EU)_V1_1.2.5 Build 20250321

How to Configure Installation Type for Omada Outdoor AP

Regulations on indoor/outdoor wireless use vary by region, impacting Omada Outdoor AP performance and compliance. If deployed incorrectly, certain 5GHz channels may be restricted. For example, in Germany, CE regulations prohibit outdoor use of UNII-1 and UNII-2A bands, while all UNII-1 to UNII-2C bands are allowed indoors. To ensure compliance and optimal performance, Omada Outdoor APs support Installation Type, allowing users to adjust settings based on deployment scenarios.

Karta katalogowa punktów dostępowych Omada EAP

Getting started with the standalone EAP

This article introduces how to quickly set up the Omada EAP in Standalone mode.

Instructions for SSID security settings on Omada Controller

Omada Controller supports five encryption methods for wireless security: None, WPA-Personal, WPA-Enterprise, PPSK without RADIUS, and PPSK with RADIUS. Users can choose different encryption methods according to their actual needs.

How to configure MAC-Based Authentication on Omada Controller

MAC-Based Authentication allows specific clients to access a wireless network based on their MAC addresses while denying access to the rest.

How to configure Fast Roaming on Omada Controller

This article describes how to configure the Fast Roaming function on the Omada Controller to optimize client roaming performance of Omada APs.

How to configure SSID VLAN on Omada AP with Third-Party Gateway

This article introduces how to configure SSID VLAN on the Omada APs to realize VLAN isolation.

How to Configure 802.11 Rate Control on Omada Controller

If your network includes a significant number of legacy wireless clients using 802.11a/b/g standards, and most clients are experiencing degraded performance (such as slow webpage loading, video buffering, or high latency), you can enhance network efficiency by adequately configuring the 802.11 Rate Control feature in the Omada Controller.

How to configure Omada EAP in Repeater mode