Setup Video

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Więcej

FAQ

Firmware

Aktualizacja oprogramowania pozwala na rozwiązanie problemów ze starszą wersją oprogramowania oraz na dodanie nowych funkcji routera.

Aktualizacja

WAŻNE: Aby zapobiec problemom podczas aktualizacji, zapoznaj się z poniższymi punktami

  • Upewnij się, że oprogramowanie jest przeznaczone dla twojej wersji sprzętowej routera. Zainstalowanie oprogramowania dla nieprawidłowej wersji może uszkodzić urządzenie i spowodować utratę gwarancji.( V1.x=V1)
  • NIE zalecamy używania oprogramowania przeznaczonego dla innego regionu niż ten, w którym się znajdujesz. Możesz wybrać swój region tutaj.
  • NIE odłączaj urządzenia od prądu podczas trwania aktualizacji. Może to spowodować trwałe uszkodzenia.
  • NIE przeprowadzaj aktualizacji za pomocą połączenia bezprzewodowego jeżeli nie jest to konieczne.
  • Zalecamy rozłączenie połączenia z Internetem przez przeprowadzeniem aktualizacji.
  • Rozpakuj pobrany plik za pomocą programu do dekompresji, takiego jak np. 7Zip lub WinRAR.

 

EAP110(EU)_(V1)_1.3.0 Build 20180418
Data publikacji: 2018-04-28 Język: Angielski Rozmiar pliku: 7.06 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

 

New Features/Improvements:

1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

2. Supports HTTPS redirection of portal authentication page.

3. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

4. Omada Controller will create Free Authentication Policy for the External Web Portal Server   and External Portal Server automatically.

5. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit at the same time, and the minimum limit value will take effect.)

6. Restricts local resources access of wireless clients which did not pass the authentication.

7. Decreased the synchronization update time of Omada Controller when the IP address of EAP is changed.

8. EAP will report Client RSSI information to Omada Controller.

9. Optimized Rouge AP detection process.

10. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11

11. The hardware version will be displayed as 1.0/2.0 in the management page.

 

Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in clients list.

3. Fixed the bug that SSID rate limit configuration may not take effect if it is configured when wireless radio is turned off.

 

Notes:

1. For EAP110 (EU)_V1 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

EAP110(EU)_V1_170915
Data publikacji: 2017-09-15 Język: Angielski Rozmiar pliku: 7.17 MB

Recommended Controller Software Version: Omada Controller v 2.5.x

New Features/Improvements

1. Support new SMS, Facebook and other authentication methods of Omada Controller v2.5.x.

2. Voucher supports speed&traffic limit of wireless clients.

Bug Fixed

Fixed the bug that EAP110 will automatically restart when XiaoMi cellphone connects to the SSID with Voucher Authentication enabled.

Notes

1. For EAP110 (EU) V1

2. Your device's configuration won't be lost after upgrading

EAP110(EU)_V1_160405
Data publikacji: 2016-04-05 Język: Angielski Rozmiar pliku: 6.93 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1.Improve stability of the EAP110
2.Optimize the inform mechanism between EAP and EAP controller.
3.Optimize the upgrade mechanism when you use the EAP controller to upgarde the firmware of EAP.

Bug Fixes:
1.Fixed the bug that you cannotd Group Member when the MAC Group name contains any blank spaces.
2.Fixed the bug that the MAC Group cannot work with the SSID which contains any blank spaces.
3.Fixed the bug that the RTS Threshold cannot choose back to 2347 if you changed it before.

Notes:

1. You can only upgrade to the EU firmware after update.
2. Transmission power is compliant with CE.
3. If you upgrade this firmware, please also upgrade your EAP Controller to EAP Controller V2.4.2 or higher version.
4. Your device's configuration won't be lost after upgrading. 

Korzystanie z firmware'u innej firmy

W przypadku niektórych modeli produktów TP-LINK istnieje możliwość zastąpienia firmware'u udostępnionego przez TP-LINK firmwarem oferowanym przez inną firmę. Jednakże, firma TP-LINK nie jest zobowiązana do wykonywania żadnych prac konserwacyjnych i nie oferuje wsparcia technicznego dla takich produktów. Nie gwarantuje także stabilności oraz poprawności działania firmware'u innej firmy. Uszkodzenie produktu, spowodowane korzystaniem z firmware'u innej firmy, powoduje utratę jego gwarancji.   

Centrum GPL

Produkty TP-LINK korzystają częściowo z oprogramowania stworzonego przez strony trzecie, w tym z kodu źródłowego oprogramowania zgodnego z licencją GNU General Public Licence (“GPL“), w wersji 1/wersji 2/wersji 3 lub licencji GNU Lesser General Public License ("LGPL"). Aby korzystać z oprogramowania, musisz się zgodzić się na warunki użytkowania produktów na licencji GPL.

Aby spełnić warunki licencji GPL, firma TP-LINK, jeżeli to konieczne, wysyła pocztą kody źrółowe GPL dla konkretnych oprogramowań na płycie CD do odczytu elektronicznego lub drogą mailową. Więcej informacji można uzyskać dla określonych produktów lub oprogramowań. Poprzez Centrum GPL firma TP-LINK zapewnia możliwość bezpłatnego pobierania kodów źródłowych oprogramowań zgodnych z licencją GPL oraz stosowanych w produktach TP-LINK.

Warunki licencji GPL znajdziesz, wydrukujesz i pobierzesz tutaj.

Dostępne programy rozprowadzane są BEZ GWARANCJI; nie obejmuje ich także gwarancja PRZYDATNOŚCI HANDLOWEJ oraz PRZYDATNOŚCI DO OKREŚLONEGO CELU. Więcej informacji dostępnych jest na stronie GNU GPL.

Controller Software

EAP Controller jest używany do zarządzania wieloma urządzeniami EAP.

Data publikacji: 2019-11-08 Język: Angielski Rozmiar pliku: 99.4MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Data publikacji: 2019-11-08 Język: Angielski Rozmiar pliku: 123.35MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data publikacji: 2019-11-08 Język: Angielski Rozmiar pliku: 120.52MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Data publikacji: 2019-11-08 Język: Angielski Rozmiar pliku: 124.43MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Data publikacji: 2019-07-26 Język: Angielski Rozmiar pliku: 99.23MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04.

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

 

Data publikacji: 2019-07-26 Język: Angielski Rozmiar pliku: 123.15MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data publikacji: 2019-07-04 Język: Angielski Rozmiar pliku: 120.29MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data publikacji: 2019-07-04 Język: Angielski Rozmiar pliku: 124.2MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Data publikacji: 2019-05-28 Język: Angielski Rozmiar pliku: 102.8MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

Data publikacji: 2019-05-28 Język: Angielski Rozmiar pliku: 129.13MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

 

Notes:

1. To use Omada Controller 3.1.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.X.

8. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Data publikacji: 2019-05-15 Język: Angielski Rozmiar pliku: 123.26MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data publikacji: 2019-05-15 Język: Angielski Rozmiar pliku: 127.16MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Data publikacji: 2019-03-25 Język: Angielski Rozmiar pliku: 102.73MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

8. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

9. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

10. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

11. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

12. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

13. Channel utilization will take effect only with new firmware.

Data publikacji: 2019-03-25 Język: Angielski Rozmiar pliku: 129.07MB
System operacyjny: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. This version software needs you to install manually via curl command.

8. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

9. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

10. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

11. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

12. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

13. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

14. Channel utilization will take effect only with new firmware.

 

Data publikacji: 2019-03-08 Język: Angielski Rozmiar pliku: 123.6MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data publikacji: 2019-03-08 Język: Angielski Rozmiar pliku: 127.5MB
System operacyjny: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Data publikacji: 2015-05-08 Język: Chiński (Simplified) Rozmiar pliku: 90 MB
System operacyjny: Windows XP/2003/Vista/7/8

Modifications and Bug Fixes:

New Features/Enhancement:
  1. Support management for dual band EAP products.
Bug Fixed:
  1. Fixed the bug that EAP Controller cannot start normally on some non-English operating systems.
  2. Fixed the bug that EAP Controller cannot wrok normally on some Windows Server systems when the built-in firewall is on.

Notes:

For EAP Series 
Data publikacji: 2015-03-26 Język: Chiński (Simplified) Rozmiar pliku: 89 MB
System operacyjny: WinXP/Vista/7/8/8.1/Server2008(32/64bit)/Server2012(64bit)

Modifications and Bug Fixes:

Bug Fixes:
1. Fixed the bug that EAP Controller can not launch up on Windows XP(64bit)and Windows Vista(64 bit);                    
2. Fixed the bug that the upload traffics and download traffics of the clients shown in the page of Statistics and Access Points are abnormal. 

Notes:

For EAP Series

EAP Discovery Tool

EAP Discovery Tool pomaga zaadoptować urządzenia EAP kontrolerowi EAP w sieci L3. Możesz również użyć programu EAP Discovery Tool do sprawdzenia adresu IP urządzenia  EAP.

Data publikacji: 2019-08-06 Język: Angielski Rozmiar pliku: 25.85 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that the Discovery Utility may fail to find EAPs.

2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

Data publikacji: 2019-06-14 Język: Angielski Rozmiar pliku: 23.54 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Data publikacji: 2018-07-24 Język: Angielski Rozmiar pliku: 84.16 MB
System operacyjny: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Data publikacji: 2016-04-12 Język: Angielski Rozmiar pliku: 3.39 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Modifications and Bug Fixes:

First Discovery Utility released.

Notes:

For EAP series, including EAP110, EAP115, EAP120, EAP220, EAP320, EAP330,etc.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

Kod GPL

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: