Accessories TL-FC111PB-20

10/100Mbps WDM Media Converter with 1-Port PoE 1

10/100Mbps WDM Media Converter with 1-Port PoE 2

10/100Mbps WDM Media Converter with 1-Port PoE 3

10/100Mbps WDM Media Converter with 1-Port PoE 4

10/100Mbps WDM Media Converter with 1-Port PoE 5

10/100Mbps WDM Media Converter with 1-Port PoE 6

10/100Mbps WDM Media Converter with 1-Port PoE 7

10/100Mbps WDM Media Converter with 1-Port PoE 8

TL-FC111PB-20

10/100Mbps WDM Media Converter with 1-Port PoE

Converts the data between fiber (optical signal) and copper (electric signal).
Extends fiber distance up to 20 km.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
Wide operating temperature (0–50 ℃) with reliability.
Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.

Overzicht

Specificaties

Netwerk
Standaarden en Protocollen	IEEE802.3, IEEE802.3i, IEEE802.3u

Functionaliteit van de Hardware
Interface	• 1× 10/100 Mbps PoE RJ45 port (Auto MDI/MDIX) • 1× 100 Mbps SC fiber port
Netwerkmedia	100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m)
Uitgangsvermogen	48 V/0.5 A
LED	PWR, Link/Act, PoE
Wave Length	1310 nm TX, 1550 nm RX
Afmetingen ( B x D x H )	3.7×2.9×1.1 in (94.5×73.0×27.0 mm)

Media Converter en Module
Vezeltype	9/125 μm single-mode fber (≤20 km)

ENVIRONMENT
Operating Temperature	0–50 °C (32–122 °F)
Storage Temperature	-40–70 °C (-40–158 °F)
Operating Humidity	10–90% RH non-condensing
Storage Humidity	5–90% RH non-condensing

Overige
Pakketinhoud	• Media Converter TL-FC111PB-20 • Power Adapter • Installation Guide

For additional version information, please go to the support page.

Support