Setup Video

  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    Learn More

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Learn More

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Learn More

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Learn More

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    ¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
EAP115-Wall(EU)_V1_1.5.0 Build 20191014
Fecha de Publicación : 2020-01-14 Idioma: Inglés Tamaño del Archivo : 5.70 MB

Recommended Controller Software Version: Omada Controller v3.2.x or above

Bug Fixed:
1. Fixed the bug that the CPU usage of EAP may be high when EAPs are deployed densely.
2. Fixed the bug that EAP may disconnect from Omada Controller when EAPs are deployed densely. 

Notes:
1. For EAP115-Wall v1 only.
2. Your device's configuration won't be lost after upgrading.
3. This version of firmware is applied to Omada APP of version 2.1.X or above.

4. You cannot downgrade if you upgrade from 2018 or older firmware to this version directly.

 

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Fecha de Publicación : 2020-04-20 Idioma: Inglés Tamaño del Archivo : 120.54MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Fecha de Publicación : 2020-04-20 Idioma: Inglés Tamaño del Archivo : 124.46MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Fecha de Publicación : 2020-04-20 Idioma: Inglés Tamaño del Archivo : 99.4MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Fecha de Publicación : 2020-04-20 Idioma: Inglés Tamaño del Archivo : 125.64MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Fecha de Publicación : 2020-04-09 Idioma: Inglés Tamaño del Archivo : 99.39MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Fecha de Publicación : 2020-04-09 Idioma: Inglés Tamaño del Archivo : 123.36MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Fecha de Publicación : 2020-01-21 Idioma: Inglés Tamaño del Archivo : 120.53MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

 

Fecha de Publicación : 2020-01-21 Idioma: Inglés Tamaño del Archivo : 124.45MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Fecha de Publicación : 2020-01-16 Idioma: Inglés Tamaño del Archivo : 123.35MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

 

Fecha de Publicación : 2020-01-16 Idioma: Inglés Tamaño del Archivo : 99.4MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 122.14MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 126.05MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Fecha de Publicación : 2018-09-05 Idioma: Inglés Tamaño del Archivo : 102.27MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (When you are using External RADIUS Server Portal function with External Web Portal)

7. Batch Upgrade function now will only take effect to EAP which belong to the current site.

8. UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9. Start Omada Controller via jsvc to realize Root Privilege separation function. (For deb installation package, it will create a non-root account called omada to run Omada Controller in default.

10. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Fecha de Publicación : 2018-09-05 Idioma: Inglés Tamaño del Archivo : 128.47MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Start Omada Controller via jsvc to realize Root Privilege separation function. (For tar.gz installation package, Omada Controller will be operated in root mode. But you can modify the OMADA_USER in bin/control.sh to assign another non-root account to run Omada Controller instead.)

7. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Fecha de Publicación : 2018-02-01 Idioma: Inglés Tamaño del Archivo : 109.2MB
Sistema de Operación : Linux

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.
4. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04, CentOS 6.x/7.x and Fedora 20 or above.
5. Require JRE 1.7 Java environment.

Fecha de Publicación : 2017-12-07 Idioma: Inglés Tamaño del Archivo : 109.2MB
Sistema de Operación : Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Fecha de Publicación : 2018-07-24 Idioma: Inglés Tamaño del Archivo : 84.16 MB
Sistema de Operación : Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Fecha de Publicación : 2018-01-05 Idioma: Inglés Tamaño del Archivo : 3.39MB
Sistema de Operación : WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

Simuladores

Versión de Firmware
Working Mode
Idioma
180514(EU)
-
Inglés
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

SuscripciónTP-Link toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link.

From United States (English)?

Check products and services for your region.