Descarga para TL-ER5120 V4

Elige una versión de hardware:

V4

>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Descripción General
Documento

Preguntas Frecuentes

Firmware

Una actualización de firmware puede resolver los problemas que pueda tener la versión anterior del firmware y mejorar su desempeño actual.

Actualizar

IMPORTANTE: Para evitar errores de actualización, por favor lea la siguiente información antes de continuar con el proceso de actualización.

  • Por favor verifique la versión del hardware de su dispositivo para obtener la versión de firmware. Una actualización de firmware incorrecta podría dañar su dispositivo y anular la garantía. (Normalmente V1.x=V1)
  • NO se recomienda actualizar el firmware que no es para su región. Dé clic aquí para seleccionar su propia región y descargar la versión del firmware más adecuada. ( ejemplo, el firmware de la EU y de USA son versiones diferentes del hardware)
  • NO apague la unidad durante el proceso de actualización, ya que puede causar daños permanentes en el producto.
  • NO actualice el firmware a través de una conexión inalámbrica a menos que el dispositivo de TP-Link sólo tenga conexión inalámbrica.
  • Se recomienda que los usuarios detengan todas las aplicaciones de Internet en la computadora, o simplemente desconecten la línea de conexión a Internet desde el dispositivo antes de la actualización.
  • Utilice el software de descompresión como WinZIP o WinRAR para extraer el archivo que descargue antes de la actualización.

TL-ER5120(UN)_V4_20200313

Descargas
Fecha de Publicación : 2020-06-28 Idioma: Inglés Tamaño del Archivo : 15.21 MB

New Feature/Enhancement:

1.  Upgrade webserver's HTTPS encryption suite TLS version to 1.2.

2.  Add support DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

3.  One-to-One NAT supports the loopback function of the WAN port.

4.  Add HTTPS web server enable/disable button.

5.  Support to obtain SNMP information through WAN port and VPN connection.

6.  Support forward IPv4 Local Scope IP address as 239.255.0.0/16.

7.  Optimize the mechanism of the session limit function.

8.  Firewall optimization for PCI DSS vulnerability scanning.

9.  Optimized the MAC address (WAN/LAN port) modification mechanism. If the MAC address in the backup file is not modified, the device will keep the default MAC address after restoring the backup file.

10.  Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

11.  UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

12.  Daylight saving time is adjusted from GMT to UTC.

13.  Security vulnerability optimization.

 

Bug Fixed:

1.  Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with “/”.

2.  Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3.  Fix the bug that LAN PC may not be able to upload data to an external server.

4.  Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

5.  Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

6.  Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7.  Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

 

 

Notes:

1. For TL-ER5120 (UN) 4.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-ER5120(UN)_V4_20180706

Descargas
Fecha de Publicación : 2018-08-21 Idioma: Inglés Tamaño del Archivo : 15.12 MB

Modifications and Bug Fixes:

First firmware released
Notes: For TL-ER5120(UN) V4.0

Usar Firmware de Terceros en los Productos de TP-Link

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

Código GPL

Simuladores

Versión de Firmware
Working Mode
Idioma
180320(UN)
-
Inglés

Note:

1.  The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3.  The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

From United States?

Get products, events and services for your region.