Affordable 10-Gigabit Switching Solution for Growing SMBs
T1700 Series 10G Smart Switches
In a world of expanding enterprises and growing virtualization, cloud-based services and applications, like VoIP, HD streaming video, and IP surveillance, SMB networks need to evolve beyond simple reliability to provide increased scalability, higher bandwidth, and enhanced performance. TP-LINK’s new T1700 Series 10G Smart Switches represent an ideal solution that meets these requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions.
12-Port 10GBase-T Smart Switch
with 4 10G SFP+ Slots
Until recently, 10-Gigabit connectivity was available only in the expensive fiber based technology that supports high-speed access to the network backbone or data center environment.
Today, 10GBase-T Technology is becoming more common and affordable. Low-Latency, Line-Rate 10G Copper Base-T is backward compatible with Fast Ethernet and Gigabit Ethernet and can automatically negotiate between higher and lower speed connections. Most importantly, 10GBase-T provides a cost-effective method for migrating from your current network to 10G Ethernet by utilizing your existing CAT5e/CAT6 RJ-45 short connections (up to 55m) and CAT6A/CAT7 connections (up to 100m). This reduces cabling complexity and ultimately results in significant savings for customers.
16 10-Gigabit Ports,
320Gbps Switching Capacity
The T1700X-16TS features 12 10GBase-T RJ45 ports and four dedicated SFP+ fiber slots, which can support up to 320Gbps of combined switching bandwidth. This provides great resiliency, relieves congestion associated with bandwidth-intensive applications, and guarantees smooth data transmission.
WITH 10G UPLINK
24-Port Gigabit Stackable Smart Switch
with 4 10GE SFP+ Slots
With True Physical Stacking Technology, up to six T1700G-28TQ units can be stacked with a single IP address.
This provides enhanced scalability, simple management, and increased redundancy for high-density deployment. It also supports efficient network expansion in the future.
True Physical Stacking Technology of up to six units supports network simplification
144 GE Ports
Up to 144 Gigabit Ethernet ports per stack
24 10G SFP+
Up to 24 10G SFP+ slots per stack
Up to 768Gbps of switching capacity for aggregated networks
1 Management IP
With all units identified by a single IP address, configuring and monitoring the stack is easy
Fanless Design for Silent Operation
The T1700G-28TQ utilizes a fanless design, which reduces the amount of ambient noise in your office. Removing the fan also reduces power consumption and helps you build a more cost-effective network.
L2+ Static Routing
Simple network segmentation, with internal routing through the switch, allows devices in different VLANs/subnets to communicate with each other and makes the flow of network traffic more efficient.
Abundant L2 Features
T1700 Series devices are equipped with a full lineup of L2 features that meet your current and future needs for unified networking and mobility.
Link Aggregation Group (LAG)
IGMP & MLD Snooping
Robust Security Strategies
Support for numerous security strategies allow you to create a secure, unified network by preventing unauthorized access, external attacks, and malware infiltration.
Access Control List (ACL)
Comprehensive QoS Features
Advanced controls provide optimized network performance and efficient delivery of time-sensitive traffic.
Port-Based or 802.1p-Based Prioritization
Layer 3-Based (DSCP) Prioritization
The T1700 Series offers comprehensive IPv6 features, including IPv6 management, Static Routing, ACL, and QoS2, which ease the transition to an IPv6-based network and protect the value of your investment.
Dual image firmware reduces downtime when the firmware is being updated. The backup image will also be activated in the event that any error occurs on the active image.
1 Only T1700X-16TS supports Private VLAN
2 IPv6 Static Routing/ACL/QoS will be supported in a future firmware release
TP-Link Helps ISP Soborka Provide Better Service for Subscribers
“TP-Link’s products offer tremendous value, which allowed us to reduce the cost of updating our large network without compromising performance. Our customers are much more satisfied with the network since the upgrade. It has done a lot to improve our reputation.”
Soporta prioridad 802.1p CoS/DSCP Soporta 8 colas de prioridad Programación de colas: SP, WRR, SP+WRR Port/Flow - basado en Limitación de Tasa IPv6 QoS* VLAN de Voz
Características L2 y L2+
Rutas Estáticas DHCP Relay* IGMP Snooping V1/V2/V3 802.3ad LACP (Hasta 14 grupos de agregación, conteniendo 8 puertos por grupo) Spanning Tree STP/RSTP/MSTP BPDU Filtering/Guard TC/Root Protect Loopback detection 802.3x Flow Control LLDP, LLDP-MED*
Soporta hasta 4K VLANs simultáneamente (hasta 4K IDs de VLAN) VLAN basada en MAC/Protocolo
Lista de Control de Acceso
Filtrado de paquetes L2～L4 basado en dirección MAC origen y destino, dirección IP, puertos TCP/UDP IPv6 ACL*
AAA* Seguridad por Puerto DHCP Snooping Vinculación IP-MAC-Puertp Inspección ARP 802.1x and Radius Authentication SSH v1/v2 SSL v3/TLSv1 Control de Tormentas Broadcast/Multicast/Unknown-unicast Defensa Dos
Apilamiento dual IPv4/IPv6 Multicast Listener Discovery (MLD) Snooping IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) versión 6 TCPv6/UDPv6
Gestión Web basada en GUI y CLI SNMP v1/v2c/v3,compatible con MIBs públicas y privadas de TP-Link RMON (grupos 1, 2, 3, 9) Monitorización de CPU Port Mirroring Actualización de Firmware: TFTP & Web Diagnóstico de Sistema: VCT SYSLOG & MIBS Públicas Dual Image
*Estas funcionalidades serán soportadas en una futura actualización de firmware.