10/100Mbps WDM Media Converter MC112CS

  • Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
  • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
  • Adopts WDM technology, transmitting and receiving data on one single fiber

What This Product Does

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK’s media converter MC111CS is just one of the examples to cooperate with MC112CS.

Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

CONVERTIDOR DE MEDIOS Y MÓDULO
Estándares y Protocolos IEEE 802.3i, IEEE 802.3u
Funciones Básicas Incorpora tecnología WDM
Modo de transferencia Half-Duplex/Full-Duplex en el puerto FX
Minimiza las perdidas causadas por fallo puntual de enlace
Amplía el alcance de la fibra hasta 20 Km
Puertos 1 puerto SC/UPC a 100 M
1 puerto RJ45 a 100 M (MDI/MDIX automático)
Longitud de Onda 1310nm Tx/1550nm Rx
WDM TX 1310nm
WDM RX 1550nm
Medio de Red 10BASE-T Cable UTP categoría 3, 4, 5 (100 metros máximo)
EIA/TIA-568 100Ω STP (máximo 100 m)
Medio de Red 100BASE-T UTP categoría 5, cable 5e (máximo 100 m)
EIA/TIA-568 100Ω STP (máximo 100 m)
Medio de Red 100BASE-FX Fibra monomodo
Indicadores de LED PWR, FDX/Col, Link/Act, SPD
Dimensiones (W*D*H) 3,7*2,9*1,1 pulgadas (94,5*73,0*27,0 mm)
Fuente de Alimentación Adaptador de corriente externo
Max Power Consumption 2.41W
Seguridad y Emisión FCC, CE, RoHS
Ambiente Temperatura de funcionamiento: 0℃~40℃ (32℉~104℉)
Temperatura de almacenamiento: -40℃~70℃ (-40℉~158℉)
Humedad de funcionamiento: 10%~90% sin condensación
Humedad de almacenamiento: 5%~90% sin condensación