Why we need to configure mail server on Omada SDN controller before adding cloud user and email log

User Application Requirement
수정일08-20-2020 05:49:28 AM 3815
본 내용은 다음 항목에 적용됩니다: 

For Omada SDN controller, if you want to add cloud user, email log, and reset password by email, you need to configure the mail server at first.


How to configure mail server?

The following is the configuration interface for mail server settings. You need to fill in the SMTP server address, SMTP service port. According to the requirement of your mailbox, you may need to enable SSL and authentication, fill in the username and password of your mailbox.

Let’s take Gmail as an example to show the configuration.


SMTP: smtp.gmail.com

Port: 465

SSL: Checked

Authentication: Checked

Username: Your Gmail address ( Here we use tplinksmb.fae@gmai.com as an example)

Password: Gmail APP password

Sender Address: Your Gmail address


Note: To set the mail server successfully, we need to make sure the third-part mail server already enables SMTP service and allows us to log in. For Gmail, it enables SMTP service by default but cannot directly log in. We need to set APP password for Gmail then use this password on Omada controller to log in. About how to set APP password for Gmail, you can refer to https://support.google.com/accounts/answer/185833?hl=en

Different mailboxes may have different ways to support third-part access. You need to configure this function based on your mailbox.


You can send a test email to one of your other mailboxes. If you set the mail server successfully, you will receive a “succeeded” message just like the above. Otherwise, you will receive a failed message.


The below are the functions that need to send the email. We need to configure mail server at first if we want to use these functions.

1.Cloud user

For Omada SDN controller, after adding cloud user, the mail server of controller will send an invitation email containing an inviting link to the TP-LINK ID email. Cloud user will be added successfully after clicking the inviting link. So we need to set up mail server before adding cloud user. Otherwise, we will fail to send an inviting email. 

If you already added cloud user without setting the mail server, you can re-invite the cloud users in the account list after completing the settings of mail server.


2. Email log

If you want to email the system log to your mailbox, you need to configure the mail server as well. And please follow the following steps complete the settings.

1 ) Enable Mail Server in Controller Settings.

2 ) Enable Alert Emails in Site Settings.

3 ) Enable Alert Emails in Admin Settings.

4 ) Enable Alert Emails in Logs Settings.


3. Forget password

If you forgot your password and need to reset the password, you can fill in your mailbox and receive an email to reset the password. So you need to configure the mail server at first as well.


구독TP-Link는 귀하의 개인 정보 보호를 중요하게 생각합니다. TP-Link의 개인 정보 보호에 대한 자세한 내용은, TP-Link의 개인 정보 보호 정책을 참조하십시오.

From United States?

Check products and services for your region.