Firmware

Un aggiornamento firmware può risolvere problemi, aumentare le performance o introdurre nuove funzionalità.

Come aggiornare

  • È strettamente necessario verificare modello e versione hardware prima di scaricare ed installare ogni firmware.
  • È possibile installare solamente firmware creati per modello e versione hardware in uso.
  • Il caricamento di un firmware non appropriato può danneggiare irrimediabilmente il dispositivo e ne invalida la garanzia.
  • Assicurarsi di non interrompere l’alimentazione del dispositivo e del computer durante l’aggiornamento.
  • I firmware sono scaricabili esclusivamente in formato compresso: è necessario estrarre il firmware aprendo l’archivio compresso tramite un software di decompressione e salvandolo sul desktop.

 

 

ER7206(UN)_V1_20210113
Data di pubblicazione: 2021-03-03 Lingua: English Dimensioni file: 16.76MB

This firmware is fully adapted to the Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using an old Omada controller and plan to upgrade firmware for EAP, then you must upgrade the Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller.

 

New Feature/Enhancement:

1. Support to configure the L2TP VPN Server and IPsec site on the same WAN port.

2. Change the detection mechanism of the “Block Ping of Death” function in the firewall, remove the packet limit of fewer than 64 Bytes.

3. Optimize the Online Detection and DNS proxy mechanisms to improve the network stability for scenarios where the front-end device has a Disconnection Alert function.

4. Optimize for scenarios where the Omada SDN Controller is accessed via the cloud when Portal is enabled.

5. Improve the compatibility of IKEv2 VPN, and the stability of L2TP over IPsec VPN.

6. Improve the network stability when the static IP address is changed in multi-WAN mode.

 

Bug Fixed:

1. Fix the bug that the DHCP Server may down under special circumstances.

2. Fix the bug that the WAN connection may down when multi-network and VPN are configured.

3. Fix the bug that the router doesn’t forward data for up to 2 minutes when the L2TP VPN Client is connected.

4. Fix the bug that the Omada SDN Controller alerts incompatible devices.

5. Fix the bug that CPU and memory usage data are not correctly displayed in the Statistics functions of the Omada SDN Controller.

6. Fix the bug that the router occasionally generates the wrong routing table for the DNS server.

 

Notes:

1. For ER7206(TL-ER7206) v1 only.

2. Your device’s configuration won’t be lost after upgrading.

3. This firmware is applied to the Omada APP of version 3.0.x or above.

 

Codice Open Source (GPL)

I prodotti TP-LINK contengono software sviluppato da terze parti, incluso software distribuito con licenza GPL (GNU General Public Licence versione 1, 2 o 3) o con licenza LGPL (GNU Lesser General Public License): l'utilizzo di questo software è possibile entro limiti e condizioni stabiliti dalla tipologia di licenza con la quale è distribuito e specificate a questo link. È possibile ottenere il codice sorgente soggetto a GPL e la lista dei prodotti che utilizzano tale codice all'interno del Centro sorgenti GPL.

I relativi software sono distribuiti con formula di TOTALE ESCLUSIONE DI GARANZIA; non sono pertanto garantite COMMERCIABILITÀ e/o IDONEITÀ PER QUALSIASI UTILIZZO SPECIFICO.

Per ulteriori informazioni consultare il testo GNU General Public License.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Data di pubblicazione: 2021-04-27 Lingua: English Dimensioni file: 91.11 MB

New Omada SDN Firmware
 

Se si prevede di aggiornare dalla vecchia versione (v3.2.14 o precedente) alla versione SDN, leggere attentamente la seguente guida Omada Controller Upgrade Guide contenuta nel pacchetto di installazione prima di aggiornare il controller.

Alcune nuove funzionalità della nuova versione richiedono l'aggiornamento firmware anche dei dispositvi come Access Point, Switch e Gateway.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

ER605_V1, ER7206_V1

 

New Feature/Enhancement:

1. Add AI-Roaming function.

2. Add daily/weekly/monthly limit in Voucher/Local User traffic limit function.

3. Add layer-3 function for L2+ switches.

4. Add IPv6 function.

5. Add daylight saving time function.

6. Portal supports multiple entries. Local user accounts and voucher codes support binding to different portal entries.

7. Add RADIUS DM function in portal RADIUS authentication.

8. Add dynamic VLAN feature in RADIUS profile.

9. Add rate limit templates for SSID and Client rate limit modules.

10. Add ethertype value for switch ACL.

11. Add Switch Status, Router Table, Dynamic DNS, VPN Status, Port Forwarding Status in the Insight list.

12. Optimize the configuration logic for Switch STP and loopback detection function.

13. Cancel the site administrator's authority for global configuration, such as controller general and maintenance settings.

14. Upgrade the MongoDB database version from 3.4.20 to 3.4.23.

 

Bug Fixed:

1. Fixed the bug that the local user can still access the Internet after re-authenticating, though it has reached the upper traffic limit.

2. Fixed the bug that the PoE scheduler may not take effect.

3. Fixed the bug that the Omada Controller frequently prints roaming logs in the log list.

4. Fixed the bug that the settings of PAP and CHAP authentication mode are inverse in the Controller.

5. Fixed the bug that we may not be able to configure or disable the portal authentication (with general error occurs) sometimes.

6. Fixed the bug that we can’t set VPN servers in different Controller sites in the meantime.

7. Fixed the bug that the SDN Controller does not support spaces character and Nordic script.

8. Fixed the bug that the Controller may not restore the backup file successfully if the backup file is too large (80MB or above).

9. Add L2TP/PPTP Interface in static routing function.

10. Add L2TP/PPTP WAN Interface in policy routing function.

 

Notes:

1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide.

3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

4. This version of the controller is applied to the Omada APP of version 3.0.X or above.

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.

From United States?

Check products and services for your region.