Business
Search
  • Soluzioni
    1. Tutte le soluzioni
    2. per Settore
    3. per Applicazione
    4. Perché scegliere TP-Link
    5. Configuratore di rete
  • Prodotti
    1. Omada Business Wi-Fi
    2. SafeStream Gateway
    3. JetStream Switch
    4. Pharos Wireless Broadband
  • Tecnologie
    1. Tecnologie
    2. Cloud
    3. Wireless
    4. Wired
  • Partner Program
    1. Partner Program
    2. Corsi e certificazioni
    3. Storie di successo
  • Supporto
    1. Tutte le risorse
    2. Guide di configurazione
    3. Download Center
    4. Supporto tecnico
    5. FAQs
    6. Garanzia e sostituzione
  • Community
Business
Search

Scarica per OC200 V1

Product Overview
Documento
Omada Hardware Controller - Gestione centralizzata Hybrid Cloud
OC200

Setup Video

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Scopri

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Scopri

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Scopri

Feature Filter: Tutto Configuration GuideUser Application RequirementQ&A of functional explanation or specification parametersTroubleshooting

FAQs

Firmware

Un aggiornamento firmware può risolvere problemi, aumentare le performance o introdurre nuove funzionalità.

Come aggiornare

  • È strettamente necessario verificare modello e versione hardware prima di scaricare ed installare ogni firmware.
  • È possibile installare solamente firmware creati per modello e versione hardware in uso.
  • Il caricamento di un firmware non appropriato può danneggiare irrimediabilmente il dispositivo e ne invalida la garanzia.
  • Assicurarsi di non interrompere l’alimentazione del dispositivo e del computer durante l’aggiornamento.
  • I firmware sono scaricabili esclusivamente in formato compresso: è necessario estrarre il firmware aprendo l’archivio compresso tramite un software di decompressione e salvandolo sul desktop.

 

 

OC200(UN)_v1_1.7.0 Build 20200703
Data di pubblicazione: 2020-07-14 Lingua: English Dimensioni file: 115.23MB

Built-in Omada SDN controller v4.1.5.
OC200 will be reset after upgrading, please back up your configuration file before upgrading.
Omada SDN Controller can manage only certain devices with supported firmware. please make sure your device is compatible with Omada SDN Controller, and follow Omada Controller Upgrade Guide to upgrade OC200.

 

Supported device models and firmware:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1

EAP230-Wall_V1

EAP235-Wall_V1

EAP660 HD_V1

EAP620 HD_V1

TL-R605_V1

TL-ER7206_V1

TL-SG2210MP_V1

TL-SG2210P_V3.2

TL-SG2428P_V1

TL-SG2008P_V1

TL-SG3210XHP-M2_V1

 

New Feature/Enhancement:

1. Omada SDN hardware controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

3. Add brand new Dashboard interface to monitor network operation in real time.

4. Add Statistics interface to monitor devices and show the statistics of network operation data.

5. Add Topology interface to generate the network topology automatically.

6. Add Insight interface to view the detailed network history data.

7. Add Logs interface that supports 100+ types of logs and custom warning level of logs.

8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on.

9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on.

10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. If you are using OC200 and planning to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

3. This version of controller is applied to Omada APP of version 3.0.X or above.

4. Only OC200(UN)_V1_1.2.3 Build 20200430 can upgrade to this version.

5. OC200 will be reset after upgrade to this version. It’s recommended to back up your configuration file before upgrading.

6. For OC200 (UN) v1.0 only.

7. This firmware cannot be upgraded through the cloud access way, because we must backup configuration file before upgrading and OC200 can only backup configuration file in the local network.
OC200(UN)_V1_1.2.3 Build 20200430
Data di pubblicazione: 2020-06-12 Lingua: English Dimensioni file: 104.15MB

Bundle Omada Controller 3.2.12.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP235-Wall_V1

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

New Feature/Enhancement:

Enhance the product stability.

 

Notes:

1. For OC200 (UN) v1.0 only.

2. To use new features of OC200, you need to upgrade your EAP's firmware to the corresponding version.

3. Your device's configuration won't be lost after upgrading.

Codice Open Source (GPL)

I prodotti TP-LINK contengono software sviluppato da terze parti, incluso software distribuito con licenza GPL (GNU General Public Licence versione 1, 2 o 3) o con licenza LGPL (GNU Lesser General Public License): l'utilizzo di questo software è possibile entro limiti e condizioni stabiliti dalla tipologia di licenza con la quale è distribuito e specificate a questo link. È possibile ottenere il codice sorgente soggetto a GPL e la lista dei prodotti che utilizzano tale codice all'interno del Centro sorgenti GPL.

I relativi software sono distribuiti con formula di TOTALE ESCLUSIONE DI GARANZIA; non sono pertanto garantite COMMERCIABILITÀ e/o IDONEITÀ PER QUALSIASI UTILIZZO SPECIFICO.

Per ulteriori informazioni consultare il testo GNU General Public License.

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Data di pubblicazione: 2020-07-09 Lingua: English Dimensioni file: 31.11 MB
Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Fully adapted to Omada SDN Controller v4.1.4.

2. Support to discover the gateway and switch that support Omada SDN platform.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.
Data di pubblicazione: 2020-07-07 Lingua: English Dimensioni file: 31.11 MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:

1. Fully adapted to Omada SDN Controller v4.1.4.

2. Support to discover the gateway and switch that support Omada SDN platform.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.
Data di pubblicazione: 2019-08-06 Lingua: English Dimensioni file: 25.85 MB
Sistema operativo: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that the Discovery Utility may fail to find EAPs.

2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

Codice GPL

Emulator

Versione Firmware
Working Mode
Lingua
181016(UN)
-
English

Feature Filter: Tutto EAP AdoptionPortalManagement

Feature Configuration Guide

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.

Seguici

L'azienda
Stampa
Dove Acquistare
Partner Program
Learning Center
Italia / Italiano
Copyright © 2020 TP-Link Corporation Limited. Tutti i diritti riservati.

From United States (English)?

Check products and services for your region.

Go Other Option