Compare Product: EAP110 vs EAP225 vs EAP245

HARDWARE FEATURES

Fast Ethernet (RJ-45) Port *1（Support Passive PoE）

Gigabit Ethernet (RJ-45) Port×1 (Support IEEE802.3af PoE and Passive PoE)

2 × Gigabit Ethernet (RJ-45) Port (One port supports IEEE802.3at PoE and Passive PoE In. Another port supports Passive PoE Out, and the power consumption of its downlink terminal devices should not exceed 5W)

Reset

24V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)

• 802.3af/at PoE
• 24V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)

• 802.3at PoE
• 48V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)

2.8 W

EU: 9.7W
US: 12.1W

EU: 14.3 W
US: 16.1 W

7.5×6.8×1.2 in (189.4×172.3×29.5mm)

8.1 × 7.1 × 1.5 in (205.5 × 181.5 × 37.1 mm)

Internal 2× 4 dBi Omni

3 Internal Omni
• 2.4 GHz: 4 dBi
• 5 GHz: 5 dBi

Internal Omni
• 2.4 GHz: 3× 3.5 dBi
• 5 GHz: 3× 4 dBi

Ceiling /Wall Mounting (Kits included)

Yes

WIRELESS FEATURES

60㎡(650ft²)^§

115㎡(1250 ft²)^§

140㎡(1500 ft²)^§

100+^**

220+^**

220+^***

IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

IEEE 802.11ac/n/g/b/a

2.4-2.4835GHz

2.4 GHz and 5 GHz

2.4GHz and 5GHz

11n: Up to 300Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)

• 5 GHz:Up to 867 Mbps
• 2.4 GHz:Up to 450 Mbps

• 5 GHz: Up to 1300 Mbps
• 2.4 GHz: Up to 450 Mbps

300M: -71dBm@10% PER
150M: -75dBm@10% PER
54M: -78dBm@10% PER
11M: -93dBm@8% PER
6M: -92dBm@10% PER
1M: -96dBm@8% PER

Multiple SSIDs （Up to 8 SSIDs）
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control （Adjust Transmit Power on dBm）
QoS(WMM)
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client

• Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
• Enable/Disable Wireless Radio
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS(WMM)
• Seamless Roaming*
• Omada Mesh*
• Band Steering
• Load Balance
• MU-MIMO
• Airtime Fairness
• Beamforming
• Rate Limit
• Reboot Schedule
• Wireless Schedule
• Wireless Statistics based on SSID/AP/Client

• Multiple SSIDs (Up to 15 SSIDs, 8 for 2.4GHz, 7 for 5GHz)
• Enable/Disable Wireless Radio
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS(WMM)
• MU-MIMO
• Seamless Roaming*
• Omada Mesh*
• Band Steering
• Load Balance
• Airtime Fairness
• Beamforming
• Rate Limit
• Reboot Schedule
• Wireless Schedule
• Wireless Statistics based on SSID/AP/Client

Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
64/128/152-bit WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK

• Captive Portal Authentication*
• Access Control
• Wireless Mac Address Filtering
• Wireless Isolation Between Clients
• SSID to VLAN Mapping
• Rogue AP Detection
• 802.1X Support

• Captive Portal Authentication*
• Access Control
• Wireless Mac Address Filtering
• Wireless Isolation Between Clients
• SSID to VLAN Mapping
• Rogue AP Detection
• 802.1X Support
• 64/128/152-bit WEP / WPA / WPA2-Enterprise,
• WPA-PSK / WPA2-PSK

CE:
<20dBm
FCC:
<26dBm

• CE:
≤20 dBm(2.4 GHz, EIRP)
≤23 dBm(5 GHz, EIRP)
• FCC:
≤24 dBm(2.4 GHz)
≤22 dBm(5 GHz)

• CE：
≤20 dBm (2.4GHz)
≤23 dBm (5GHz)
• FCC:
≤24 dBm (2.4 GHz)
≤24 dBm (5 GHz)

Management Features

Yes

• Omada Hardware Controller
• Omada Software Controller

• Omada Hardware Controller OC300
• Omada Hardware Controller OC200
• Omada Software Controller
• Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)

• Omada Cloud-Based Controller
• Omada Hardware Controller (OC300)
• Omada Hardware Controller (OC200)
• Omada Software Controller

Yes (Through OC300, OC200, or Omada Software Controller)

Yes, through
• OC300
• OC200
• Omada Software Controller
• Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)

Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller)

Yes

v1,v2c

v1, v2c

Local/Remote Syslog

Yes

HTTP/HTTPS

Yes

Yes. Requiring the use of Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)

Yes. Requiring the use of Omada Cloud-Based Controller.

OTHERS

CE, FCC, RoHS

300Mbps Wireless N Ceiling Mount Access Point EAP110
Passive PoE Adapter,
Power Cord,
Mounting Kits,
Installation Guide

• AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point EAP225
• Passive PoE Adapter
• Power Cord
• Mounting Kits
• Installation Guide

• AC1750 Wireless MU-MIMO Gigabit Ceiling Mount Access Point EAP245
• Gigabit 48V Passive PoE Adapter
• Power Cord
• Mounting Kits
• Installation Guide

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux

Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

• Operating Temperature: 0–40 ℃ (32–104 ℉)
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing