Unmanaged Switches TL-SL1210MP

8-Port 10/100Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+ 1

8-Port 10/100Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+ 2

8-Port 10/100Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+ 3

TL-SL1210MP

End of Life

8-Port 10/100Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+

With 8 PoE+ ports, transfers data and power on one single cable
Working with IEEE802.3af/at compliant PDs, expands your network
Supports PoE power up to 30 W for each PoE port
Supports PoE power up to 124 W* for all PoE ports
Up to 250 m data and power transmission under Extend** Mode specially designed for surveillance system
Isolation Mode allows one-click client traffic separation for higher security and performance
Requires no configuration and installation

Overview

What This Product Does

TL-SL1210MP is an unmanaged PoE switch with eight 10/100 Mbps ports, one Gigabit port and one SFP port, and its total PoE budget of the eight PoE+ ports is 124 W*. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to wherethere are no power lines or outlets, where you wish to fx devices such as APs, IP Cameras or IP Phones, etc.

How This Product Works

8 of the 11 Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).

Overload Arrangement

TL-SL1210MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is larger than124 W*, a priority will be arranged among the PoE ports, then the system will cut oﬀ the power of the lowest-priority port.

Intelligent Power Management

Priority (port 1 > port 2 >...> port 7 > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 30 W (maximum power per port is 30 W); the system power now is 120 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut oﬀ the power of port 4 because of the overloaded power, this means port 1, 2, 3 and 4 will use 30 W, no power will be supplied to port 5.

Easy To Use

TL-SL1210MP is easy to install and use. It requires no confguration and installation. With desktop and wall mountable design, outstanding performance and quality, TL-SL1210MP is a great selection for expanding your network.

Note:
* PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables.