Beállítási videó

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More

GYIK

Firmware

A firmware frissítés megoldást kínál olyan problémákra, amikkel az előző verzió esetleg rendelkezett, ill. egyes funkciók hozzáadását és fejlesztését teszi lehetővé.

Frissítés

FONTOS: A frissítéskor legyen körül tekintő, hogy elkerülje a készülék használhatatlanná válását, és kövesse az alábbi útmutatót a helyes frissítési folyamathoz:

  • Kérjük, ellenőrizze a készülék hardver verzióját a megfelelő firmware verzió eléréséhez. A helytelen firmware frissítés károsíthatja a készüléket, és érvényteleníti a garanciát. (Általában v1.x = V1);
    Nem ajánlatos ezzel a firmware-rel frissíteni olyan készülékez, aminek régió megjelölése eltérő. Kérjük, keresse ki itt az ön régióját a legmegfelelőbb firmware kiválasztásához. (Pl.: az EU és a US megjelölésű firmware-ek eltérnek egymástól)
  • NE kapcsolja ki a készüléket a frissítés ideje alatt, mert ezzel visszafordíthatatlan károsodást okoz.
  • NE frissítse a firmware-t vezeték nélküli (Wi-Fi) kapcsolattal, kivéve ha TP-LINK készülék csak a vezeték nélküli kapcsolattal rendelkezik.
  • Javasolt, hogy a frissítés megkezdése előtt közvetlenül a felhasználó minden, az internet kapcsolatot használó alkalmazást leállítson a számítógépen, vagy egyszerűen húzza ki az internetet szolgáltató kábelt a TP-LINK készülékből.
  • Használjon a frissítéshez letöltött tömörített fájlok kicsomagolásához például WinZip vagy WinRAR szoftvert.
  • A letölthető frissítést tartalmazó tömörített fájlt (jellemzően .zip), valamint kicsomagoláskor a frissítést tartalmazó fájlt (jellemzően .bin) olyan helyre mentse a PC/Laptopon, ahol könnyen megtalálja (javasolt az Asztal/Desktop megadása mint mentési hely, ha lehetséges).
EAP225(EU)_V2_1.4.0 Build 180323
Kiadás dátuma: 2018-04-13 Nyelv: Angol Fájlméret: 8.12MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

 

New Features/Improvements:

1. Support Omada APP management method.

2. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

3. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11.

4. Optimized Rouge AP detection process.

5. Web UI optimization.

6. The hardware version will be displayed as 1.0/2.0 in the management page.

 

Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients can use Facebook and Whatsapp APP before passing the portal authentication.

3. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in the clients list.

 

Notes:

1. For EAP225 (EU)_V2 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

EAP225(EU)_V2_180208
Kiadás dátuma: 2018-02-24 Nyelv: Angol Fájlméret: 7.96 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

New Features/Improvements:

1. Supports HTTPS redirection of portal authentication page.

2. Facebook Portal now intercepts HTTPS access unless you pass the authentication

3. Omada Controller increased the synchronization update process when the IP address of EAP is changed.

4. EAP will report Client RSSI information to Omada Controller.

5. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured.

6. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.)

7. Restricts local resources access of wireless clients which did not pass the authentication.

Bug Fixed:

1. The Controller now displays traffic statistics accurately.

2. Fixed the issue rate limit function may not work when Rate Limit value of Voucher is lower than 2 Kbps.

3. Fixed the issue SSID rate limit configuration may not take effect when wireless radio is turned off.

4. Fixed the system error caused by portal module after receiving some anomalous data packets.

Notes:

1. For EAP225(EU)_V2 only.

2. Your device's configuration won't be lost after upgrading.

EAP225(EU)_V2_170828
Kiadás dátuma: 2017-08-28 Nyelv: Angol Fájlméret: 7.90 MB

Recommended Controller Software Version: Omada Controller v 2.5.x

New Features/Improvements:

1. Support new SMS, Facebook and other authentication methods of EAP Controller v2.5.1.
2. Voucher supports speed&traffic limit of wireless clients.
3. Enhance stability.

Notes:

1. For EAP225 V2.

2. Your device's configuration won't be lost after upgrade.

Harmadik fél által fejlesztett firmware használata TP-Link termékkel

Néhány hivatalos TP-Link termék firmware-e helyettesíthető harmadik fél által fejlesztett firmware verzióval, mint pl.: DD-WRT. Ilyen esetekben a TP-Link nem nyújt támogatást a készülékhez, és annak használata nem garantálja a teljesítményt és a stabil működést. A harmadik fél által készített firmware okozta készülékkárosodásért a TP-Link nem vállal felelősséget, és a készülékre vonatkozó garancia teljes elvesztésével jár. Kérjük, ezeket a firmware verziókat a fentiek figyelembe vételével, és csak is saját felelősségre használja!

Nyílt forráskód programozóknal (GPL)

Az alábbi információk a programozóknak szól, a legtöbb otthoni felhasználót nem érinti.

A TP-LINK termékek részben tartalmaznak harmadik fél által fejlesztett szoftverkódot, beleértve a GNU General Public License ("GPL"), 1-es verzió/2-es verzió/3-as verzió vagy GNU General Public License ("LGPL") alátartozó szoftvert kódokat.

A megfelelő GPL licenc feltételeket megnézheti, kinyomtathatja és letöltheti innen.Ezzel a TP-LINK egy ingyenesen letölthető példányt biztosít a megfelelő szoftver forráskóddal az adott a TP-LINK termékhez, valamint információt, hogy mely termékek rendelkeznek GPL szoftverkóddal, amit a GPL Code Center alatt is megtekinthet.

A vonatkozó programok GARANCIA NÉLKÜL kerülnek terjesztésre; a felhasználó saját felelősségre használhatja azokat, a ROSSZ FELHASZNÁLÁSBÓL eredő károkért a TP-LINK nem vállal felelősséget. Tekintse meg a vonatkozó GNU General Public License további részleteit.

Vezérlőprogram

The EAP Controller is used to manage multiple EAPs intensively.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 120.54MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 124.46MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Added the feature that the system logs can be exported.

2. Changed the priority that non-administrator role cannot change the history data retention settings.

3. Optimized the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

3. Fixed the bug that Omada Controller allow any user to read the files of controller.

4. Fixed the bug that controller will report an error when Top Usage data is empty.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 99.4MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2020-04-20 Nyelv: Angol Fájlméret: 125.64MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

Bug Fixed:

1. Fixed the bug that Omada Controller allow any user to read the files of controller.

2. Fixed the bug that controller will report an error when Top Usage data is empty. 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2020-04-09 Nyelv: Angol Fájlméret: 99.39MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2020-04-09 Nyelv: Angol Fájlméret: 123.36MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add the feature that the system logs can be exported.

2. Change the priority that non-administrator role cannot change the history data retention settings.

3. Optimize the UI of Statistics in Omada Controller.

 

Bug Fixed:

1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters.

2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 99.4MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 123.35MB
Operációs rendszer: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 120.52MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Kiadás dátuma: 2019-11-08 Nyelv: Angol Fájlméret: 124.43MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Kiadás dátuma: 2019-07-04 Nyelv: Angol Fájlméret: 120.29MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2019-07-04 Nyelv: Angol Fájlméret: 124.2MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Kiadás dátuma: 2019-03-08 Nyelv: Angol Fájlméret: 123.6MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Kiadás dátuma: 2019-03-08 Nyelv: Angol Fájlméret: 127.5MB
Operációs rendszer: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

EAP felderítő

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Kiadás dátuma: 2019-06-14 Nyelv: Angol Fájlméret: 23.54 MB
Operációs rendszer: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Kiadás dátuma: 2018-07-24 Nyelv: Angol Fájlméret: 84.16 MB
Operációs rendszer: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

MIB fájlok

Kiadás dátuma: 2017-04-15 Nyelv: Angol Fájlméret: 2.81 KB

Notes:

EAP225_V2_170303 frissítéshez/készülékhez.
Elérhető node-ok:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).tplink(11863).ap(10).eap(1).clientStatis(1).clientCount(1);
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).tplink(11863).ap(10).eap(1).clientStatis(1).clientTable(2).clientEntry(1).clientIndex(1);
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).tplink(11863).ap(10).eap(1).clientStatis(1).clientTable(2).clientEntry(1).macAddress(2);
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).tplink(11863).ap(10).eap(1).systemTools(2).systemToolReboot(1);

 

GPL-kód

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Feliratkozás a hírlevélreA TP-Link komolyan veszi az adatok védelmét. További információért látogassa meg a TP-Link Adatvédelmi irányelvek oldalt..

From United States (English)?

Check products and services for your region.