2.4GHz 300Mbps 12dBi Outdoor CPE
- Built-in 12dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 30dBm/1000mw
- System-level optimizations for more than 13km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users.
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).
Qualcomm Atheros enterprise 560MHz CPU
High power Tx and high sensitivity Rx radio front-end design
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference
V-Pol Co-polarization Pattern
H-Pol Co-polarization Pattern
13km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.
TP-LINK MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.
Pharos Control – Centralized Management System
CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.
User-friendly web-based management system allows professionals to do more specific configurations.
2.4GHz 300Mbps 12dBi Outdoor CPE CPE220
Built-in 12dBi Dual-polarized
AP / Client / Repeater / AP Router /
AP Client Router (WISP) operation modes
6KV Lightning Protection
Weather Proof Enclosure
15KV ESD Protection
Passive PoE Adapter
|Wireless Speed||5GHz 300Mbps||5GHz 300Mbps||2.4GHz 300Mbps||2.4GHz 300Mbps|
|External Antenna Interface||-||-||-||-|
|Dual Ethernet Ports||√||√||√||√|
|Lightning Protection over
|Power Supply||24V Passive PoE
|24V Passive PoE
|24V Passive PoE
|24V Passive PoE
|Operation Modes||AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode|
|Transmit Power Control||Stepping 1dBm||Stepping 1dBm||Stepping 1dBm||Stepping 1dBm|
|MAXtream TDMA Mode||√||√||√||√|
|Iperf Speed Test Tool||√||√||√||√|
|Pharos Control Supported
(Central Network Management Application)
Wireless Networking for Elevators
TP-Link offers wireless point to point link delivering up to 300 Mbps throughput. The point to point link provides wireless coverage to the entire shaft, and delivers network to the elevator car, connecting the surveillance cameras or digital signage. So that real time video can be recorded to a DVR without hard wiring coax cable directly from the camera to the recorder.
- Easy, Flexible Installation
- Stable Connections at High-Speeds
- Ideal for Elevator Camera
- No Complex Cabling
- PoE Support
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru“The performance of CPE was better than expected, working stable even with -85 dBm of received power.” —David Grillo, Engineer, Kroton
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia“Amazing! The performance of the Pharos Wireless Broadband Solution has exceeded even our wildest expectations.” —Bagus Prakoso, Owner of ADINET
|Processor||Qualcomm Atheros 560MHz CPU, MIPS 24Kc|
|Memory||64MB DDR2 RAM, 8MB Flash|
|Interface||1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)1 10/100Mbps Shielded Ethernet Port (LAN1)1 Grounding Terminal1 Reset Button|
|Power Supply||Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC
|Power Consumption||10.8 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will
be higher by some amount depending on the length of the connecting cable.
|Dimensions ( W x D x H )||11×3.1×2.1 inch (276×79×60 mm)|
|Antenna Type||Built-in 12dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 60° (H-Plane) / 30° (E-Plane)
Note: For more details, please refer to datasheet
|Protection||15KV ESD Protection
6KV Lightning Protection
|Enclosure||Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
|Wireless Standards||IEEE 802.11b/g/n (with Pharos MAXtream disabled)|
|Proprietary Protocol||TDMA Mode (with Pharos MAXtream enabled)|
|Wireless Speeds||Up to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Note: Available operating frequency may vary depending on the limitations
of the countries or regions in which the device is used.
|Transmission Power||30dBm/1000mw (Adjustable power by 1dBm)Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.|
|Wireless Configurations||Pharos MAXtream TDMA Technology
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
|Management||Discovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
Ping Watch Dog
|System Tools||Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
|System-level Optimizations||Optimized IGMP Snooping/Proxy for multicast applications
Hardware watch dog
|POE ADAPTER FEATURES|
|Dimensions(W x D x H)||85.8×43.9×31.9 mm|
|Interfaces||1 AC Jack with Earth Ground1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)1 10/100/1000Mbps Shielded Ethernet Port (Data)|
|Button||Remote Reset Button|
|Power Status LEDs||Green|
|Output||24VDC, 0.5A Max+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)|
|Certification||CE, FCC, RoHS, IPX5|
|Package Contents||Outdoor Wireless CPE24V 0.5A Passive PoE AdapterPole Mounting StrapsAC Power CordInstallation Guide|
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,
MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user
experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
|Environment||Operating Temperature: -40℃~70℃ (-40℉~158℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~95% non-condensing|
*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*Power supply distances are based on test results under normal usage conditions. Actual power supply distance will vary as a result of 1) AP status, including transmit power, connected devices and network traffic, 2) cable properties, including type and texture and 3) environmental factors, which include temperature and humidity.
From United States?
Get products, events and services for your region.