Téléchargement pour TL-ER6020 V2

Veuillez choisir la version matérielle:

V2

>Comment trouver la version matérielle d'un appareil TP-Link ?

IMPORTANT: les disponibilités des modèles et des versions matérielles varient selon les régions. Merci de vous référer au site TP-Link du pays qui vous concerne.
Récapitulatif Produit
Documents

Logiciel client VPN IPSec

IPSec VPN Client

Téléchargement
Date de publication: 2017-08-11 Langue: Anglais Taille du fichier: 5.81 MB
Système d'Exploitation: Win2000/XP/2003/Vista/7

FAQs

Firmware / Micrologiciel

Une mise à jour du micrologiciel (Firmware)  interne des produits peut résoudre les problèmes de la version précédente et améliorer les performances du produit.

Pout procéder

IMPORTANT: Pour éviter les échecs de mise à jour, veuillez lire ce qui suit avec attention, avant de procéder ; en cas de doute n’hésitez pas à contacter le support technique TP-Link.

  • Il est recommandé de télécharger les micrologiciels uniquement depuis le site Web TP-Link.fr. Si votre matériel a été commercialisé par une autre succursale TP-Link cliquez ici.
  • Déterminez la version matérielle de votre produit TP-Link avant de rechercher les micrologiciels conçu pour cette version.
    Un micrologiciel non spécifiquement conçu pour la version matérielle de votre produit peut endommager ce dernier et en annuler la garantie.
    (Sauf spécifications contraires, les sous-versions matérielles acceptent les micrologiciels de la version principale : V2 = V2.0, V2.1, V2.x…
    en revanche V1 ne peut recevoir les micrologiciels de V2, V3, Vx et inversement)
  • Comment trouver la version matérielle d’un produit TP-Link ?
  • Ne coupez PAS l'alimentation électrique du produit TP-Link pendant sa mise à jour, cela pourrait l’endommager de façon permanente.
  • Ne procédez PAS à la mise à jour du micrologiciel via une connexion Wi-Fi (sauf bien entendu pour les produits dépourvus de connexion Ethernet).
  • Il est très fortement recommandé de procéder à la mise à jour depuis un ordinateur non connecté à internet (uniquement durant le temps de cette mise à jour).
  • Utilisez un logiciel (au cas où votre système d’exploitation n’intègre pas cette fonctionnalité) pour extraire le micrologiciel du fichier (.zip ou .rar) que vous aurez téléchargé depuis notre site.
  • Aucun micrologiciel n’est exécutable directement il faut passer par l’interface du produit ou de l’utilitaire associé (cf. mode d’emploi du produit) pour procéder à la mise à jour.

TL-ER6020(UN)_V2_ 20200623

Téléchargement
Date de publication: 2020-08-24 Langue: Anglais Taille du fichier: 11.74 MB

New Feature/Enhancement:

1.  Upgrade webserver's HTTPS encryption suite TLS version to 1.2.

2.  Add support DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

3.  One-to-One NAT supports the loopback function of the WAN port.

4.  Add HTTPS web server enable/disable button.

5.  Support to obtain SNMP information through WAN port and VPN connection.

6.  Support forward IPv4 Local Scope IP address as 239.255.0.0/16.

7.  Optimize the mechanism of the session limit function.

8.  Firewall optimization for PCI DSS vulnerability scanning.

9.  Optimized the MAC address (WAN/LAN port) modification mechanism. If the MAC address in the backup file is not modified, the device will keep the default MAC address after restoring the backup file.

10.  Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

11.  UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

12.  Daylight saving time is adjusted from GMT to UTC.

13.  Security vulnerability optimization.

 

Bug Fixed:

1.  Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with “/”.

2.  Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3.  Fix the bug that LAN PC may not be able to upload data to an external server.

4.  Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

5.  Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

6.  Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7.  Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

8. Fix the bug that two clients located behind the same NAT device cannot build L2TP over IPsec VPN with ER 6120v2 at the same time.

Notes:

1. For TL-ER6020 (UN) 2.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-ER6020(UN)_V2_20180702

Téléchargement
Date de publication: 2018-08-10 Langue: Anglais Taille du fichier: 11.70 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled. 
Notes:
For TL-ER6020 V2.0

TL-ER6020(UN)_V2_20180211

Téléchargement
Date de publication: 2018-02-28 Langue: Anglais Taille du fichier: 11.67 MB

Modifications and Bug Fixes
1. Fix the problem of static routing can't work via LAN interface.
2. Fix the DNS or routing table problem when using the Link Backup.
3. Fix the problem of cannot open the Web interface of the other side via IPSec VPN tunnel.
4. Fix the problem of L2TP over IPSec VPN might be down when transmitting large files via VPN tunnel.
5. Fix the problem of DHCP Server might crash when there are some clients with same in the LAN.
6. Fix the problem of WAN1 traffic statistics can't work when the IPTV enabled.
7. Enhanced the stability of the router.
8. Reduce the time from WAN interface get IP to get to the internet.
9. Add the function of importing all at the page of ARP scaning.

Utiliser un firmware tiers non développé ni distribué par TP-Link dans les produits TP-Link

Certains firmwares officiels de produits TP-Link peuvent être remplacés par des firmwares tiers tels que : OpenWrt, DD-WRT, LEDE, Gargoyle etc.
TP-Link n'a aucune obligation de support concernant ces micrologiciels, et ne garantit en aucun cas performances et stabilité des produits qui seraient pourvus de ces firmwares.

L'altération fonctionnelle d’un produit consécutif à l’installation et/ou à l'utilisation d'un firmware tiers annulera de fait la garantie de ce produit.

 

Accès au code source soumis à licence GPL

Remarque : Les produits de TP-Link contiennent des portions de logiciel développées par des tiers, ce qui inclus du code soumis à la licence GNU (GPL), Version 1, Version 2, Version 3 ou GNU Lesser General Public License (" LGPL "). Vous pouvez utiliser le code concerné à condition de respecter les termes de la licence.

Vous pouvez consulter, imprimer et télécharger les conditions de la licence GPL ici. Vous trouverez les codes source GPL des logiciels respectifs utilisés dans les produits TP-Link pour le téléchargement direct et d'autres informations, y compris une liste des logiciels TP-Link contenant du code logiciel soumis à licence GPL dans le Centre de code GPL.

Les programmes respectifs sont distribués SANS AUCUNE GARANTIE ; sans même la garantie implicite de QUALITÉ MARCHANDE ou d'ADÉQUATION À UN USAGE PARTICULIER. Voir la licence publique générale GNU respective pour plus de détails.

Code GPL

Emulateurs

Version firmware
Mode de fonctionnement
Langue
171222
-
Anglais

Remarques:

1. L'émulateur est une interface graphique Web virtuelle où vous pouvez découvrir le panneau de gestion des produits TP-Link.

2. Les émulateurs répertoriés peuvent ne pas avoir le dernier firmware.

3. Les fonctionnalités affichées sont fournies à titre indicatif et leur disponibilité peut dépendre des réglementations locales. Pour plus d'informations, veuillez vous référer à la fiche technique ou à la page du produit.

De United States?

Infos produits, événements, services pour votre pays.