Téléchargement pour EAP110 V1

Veuillez choisir la version matérielle:

V1

>How to find the hardware version on a TP-Link device?
IMPORTANT: les disponibilités des modèles et des versions matérielles varient selon les régions. Merci de vous référer au site TP-Link du pays qui vous concerne.
Documents

Setup Video

  • This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

  • How to Set up a TP-Link EAP via Web browser

FAQs

Firmware / Micrologiciel

Une mise à jour du micrologiciel (Firmware)  interne des produits peut résoudre les problèmes de la version précédente et améliorer les performances du produit.

Pout procéder

IMPORTANT: Pour éviter les échecs de mise à jour, veuillez lire ce qui suit avec attention, avant de procéder ; en cas de doute n’hésitez pas à contacter le support technique TP-Link.

  • Il est recommandé de télécharger les micrologiciels uniquement depuis le site Web TP-Link.fr. Si votre matériel a été commercialisé par une autre succursale TP-Link cliquez ici.
  • Déterminez la version matérielle de votre produit TP-Link avant de rechercher les micrologiciels conçu pour cette version.
    Un micrologiciel non spécifiquement conçu pour la version matérielle de votre produit peut endommager ce dernier et en annuler la garantie.
    (Sauf spécifications contraires, les sous-versions matérielles acceptent les micrologiciels de la version principale : V2 = V2.0, V2.1, V2.x…
    en revanche V1 ne peut recevoir les micrologiciels de V2, V3, Vx et inversement)
  • Comment trouver la version matérielle d’un produit TP-Link ?
  • Ne coupez PAS l'alimentation électrique du produit TP-Link pendant sa mise à jour, cela pourrait l’endommager de façon permanente.
  • Ne procédez PAS à la mise à jour du micrologiciel via une connexion Wi-Fi (sauf bien entendu pour les produits dépourvus de connexion Ethernet).
  • Il est très fortement recommandé de procéder à la mise à jour depuis un ordinateur non connecté à internet (uniquement durant le temps de cette mise à jour).
  • Utilisez un logiciel (au cas où votre système d’exploitation n’intègre pas cette fonctionnalité) pour extraire le micrologiciel du fichier (.zip ou .rar) que vous aurez téléchargé depuis notre site.
  • Aucun micrologiciel n’est exécutable directement il faut passer par l’interface du produit ou de l’utilitaire associé (cf. mode d’emploi du produit) pour procéder à la mise à jour.
EAP110(EU)_(V1)_1.3.0 Build 20180418
Date de publication: 2018-04-28 Langue: Anglais Taille du fichier: 7.06 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x

 

New Features/Improvements:

1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

2. Supports HTTPS redirection of portal authentication page.

3. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

4. Omada Controller will create Free Authentication Policy for the External Web Portal Server   and External Portal Server automatically.

5. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit at the same time, and the minimum limit value will take effect.)

6. Restricts local resources access of wireless clients which did not pass the authentication.

7. Decreased the synchronization update time of Omada Controller when the IP address of EAP is changed.

8. EAP will report Client RSSI information to Omada Controller.

9. Optimized Rouge AP detection process.

10. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11

11. The hardware version will be displayed as 1.0/2.0 in the management page.

 

Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in clients list.

3. Fixed the bug that SSID rate limit configuration may not take effect if it is configured when wireless radio is turned off.

 

Notes:

1. For EAP110 (EU)_V1 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

EAP110(EU)_V1_170915
Date de publication: 2017-09-15 Langue: Anglais Taille du fichier: 7.17 MB

Recommended Controller Software Version: Omada Controller v 2.5.x

New Features/Improvements

1. Support new SMS, Facebook and other authentication methods of Omada Controller v2.5.x.

2. Voucher supports speed&traffic limit of wireless clients.

Bug Fixed

Fixed the bug that EAP110 will automatically restart when XiaoMi cellphone connects to the SSID with Voucher Authentication enabled.

Notes

1. For EAP110 (EU) V1

2. Your device's configuration won't be lost after upgrading

EAP110(EU)_V1_160405
Date de publication: 2016-04-05 Langue: Anglais Taille du fichier: 6.93 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1.Improve stability of the EAP110
2.Optimize the inform mechanism between EAP and EAP controller.
3.Optimize the upgrade mechanism when you use the EAP controller to upgarde the firmware of EAP.

Bug Fixes:
1.Fixed the bug that you cannotd Group Member when the MAC Group name contains any blank spaces.
2.Fixed the bug that the MAC Group cannot work with the SSID which contains any blank spaces.
3.Fixed the bug that the RTS Threshold cannot choose back to 2347 if you changed it before.

Notes:

1. You can only upgrade to the EU firmware after update.
2. Transmission power is compliant with CE.
3. If you upgrade this firmware, please also upgrade your EAP Controller to EAP Controller V2.4.2 or higher version.
4. Your device's configuration won't be lost after upgrading. 

Utiliser un micrologiciel tiers (non développé ni distribué par TP-Link dans les produits TP-Link

Certains micrologiciels officiels de produits TP-Link peuvent être remplacés par des micrologiciels tiers tels que : OpenWrt, DD-WRT, LEDE, Gargoyle etc.
TP-Link n'a aucune obligation de support concernant ces micrologiciels, et ne garantit en aucun cas performances et stabilité des produits qui seraient pourvus de ces micrologiciels.

L'altération fonctionnelle d’un produit consécutif à l’installation et/ou à l'utilisation d'un micrologiciel tiers annulera de fait la garantie de ce produit.

 

Accès au code source soumis à licence GPL

Remarque : Les produits de TP-Link contiennent des portions de logiciel développées par des tiers, ce qui inclus du code soumis à la licence GNU (GPL), Version 1, Version 2, Version 3 ou GNU Lesser General Public License (" LGPL "). Vous pouvez utiliser le code concerné à condition de respecter les termes de la licence.

Vous pouvez consulter, imprimer et télécharger les conditions de la licence GPL ici. Vous trouverez les codes source GPL des logiciels respectifs utilisés dans les produits TP-Link pour le téléchargement direct et d'autres informations, y compris une liste des logiciels TP-Link contenant du code logiciel soumis à licence GPL dans le Centre de code GPL.

Les programmes respectifs sont distribués SANS AUCUNE GARANTIE ; sans même la garantie implicite de QUALITÉ MARCHANDE ou d'ADÉQUATION À UN USAGE PARTICULIER. Voir la licence publique générale GNU respective pour plus de détails.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Date de publication: 2018-04-13 Langue: Anglais Taille du fichier: 104.59MB
Système d'exploitation: Windows 7/8/10/Server

New Features/Improvements:

1.Safety performance optimization.

2.Web UI optimization.

3.Optimized the format requirement and handling mechanism for Local User Account importing files.

Bug Fixed:

1.Fixed the bug that clients may lose the authorized status in the next ten minutes, after passing the Facebook Portal authentication.

2.Fixed the bug that customer can add port number except for port 1024~65535, if customer has already added http/https prefix in the URL of Free Authentication Policy.

3.Fixed the bug that Controller will still adopt the EAP, after skipping the Select Devices process in the quick setup wizard of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Date de publication: 2018-02-28 Langue: Anglais Taille du fichier: 104.73MB
Système d'exploitation: Windows 7/8/10/Server

New Features/Improvements:

1. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.)

2. RSSI (Received Signal Strength Indication) of clients will be displayed in the clients list of Omada Controller.

3. Added Historical Data Retention function to clean history and cache files of Omada Controller periodically.

4, Improved the Portal Authentication mechanism. Users who didn’t pass the authentication cannot access local network.

5. HTTPS now supports the redirection of portal authentication page.

6. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

7. Added Daily Limit function to No Authentication portal. After authentication times out, users cannot get authenticated again in one day.

8. Supports single and bulk printing of Voucher code.

9. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured.

10. Increased the synchronization update process on Omada Controller when the IP address of EAP is changed.

11. Added error messages that port is already occupied or another Controller is already running in the subnet when starting the Omada Controller.

12. Changed the name of EAP Controller to Omada Controller

Bug Fixed:

1. Added Term of Use function back in portal authentication page.

2. Fix the bug that cannot add Background Picture or Logo Picture in Portal login page when image size is less than 2MB.

3. Fix the bug that the Top-Level Domain of e-mail address cannot exceed 4 English characters.

4. Fix the bug that set Facebook Portal authentication failed when using Firefox browser with private mode and tracking protection function enabled.

5. Fix the bug that cannot login the portal authentication page after changing the default HTTP port (8088) of Omada Controller (you also need to upgrade the corresponding firmware of EAP which fixed this bug).

6. Fix the bug that cannot search the AP name with a blank in the Access Points and Clients list of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x added new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Date de publication: 2018-02-01 Langue: Anglais Taille du fichier: 109.2MB
Système d'exploitation: Linux

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.
4. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04, CentOS 6.x/7.x and Fedora 20 or above.
5. Require JRE 1.7 Java environment.

Date de publication: 2018-01-05 Langue: Anglais Taille du fichier: 113.15MB
Système d'exploitation: Windows 7/8/10/Server

New Features/Improvements:
User Interface improvements
Bug Fixed:
1. Fix: COMODO security software will cause Initialization failure of the Omada Controller
2. Fix: Logo picture with transparent background will become black when uploaded in portal login page.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Date de publication: 2017-12-07 Langue: Anglais Taille du fichier: 109.2MB
Système d'exploitation: Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Date de publication: 2017-08-15 Langue: Anglais Taille du fichier: 103.5MB
Système d'exploitation: Windows 7/8/10/ server

Modifications and Bug Fixes:

New Features/Enhancement:
1. Display hardware version on the AP list.
2. Optimize AP adopting mechanism. 
3. Support upgrading firmware in batch based on hardware version.

Date de publication: 2017-07-18 Langue: Anglais Taille du fichier: 82.22MB
Système d'exploitation: Linux

Modifications and Bug Fixes:

New Features/Enhancement:
1. Display hardware version on the AP list.
2. Optimize AP adopting mechanism. 
3. Support upgrading firmware in batch based on hardware version.
4. Support starting up the EAP Controller service with system booting.

Notes:

1. Support Linux X64 OS, including Ubuntu 16.04/17.04, CentOS 7.2/7.3, Fedora 24/25.
2. Require JRE 1.7 Java environment.

Date de publication: 2016-06-07 Langue: Chinois (simplifié) Taille du fichier: 92.14 MB
Système d'exploitation: WinXP/Vista/7/8/8.1/10/Server2008 (32/64bit)/Server2012 (64bit)

Modifications and Bug Fixes:

New Features/Enhancement: 
Improved the tip information when you upgrade EAP series. 

Bug Fixed:
Fixed the bug that EAP Controller cannot adopt EAP320/330 when Controller host uses Thailand Calendar.

Notes:

1. For EAP with EU/US firmware.
2. If you use EAP UN firmware, it would remind you to upgrade to the EU/US firmware.

Date de publication: 2016-04-07 Langue: Anglais Taille du fichier: 92.13MB
Système d'exploitation: WinXP/Vista/7/8/8.1/10/Server2008 (32/64bit)/Server2012 (64bit)

Modifications and Bug Fixes:

New Features/Enhancement: 
After you configured Reboot Schedule, the log would ignore the periodical rebooting of EAPs.

Bug Fixed:
Fixed the bug that after you enable the portal and keep the EAP controller running, some Android phones will get an error with the portal webpage when you try to authenticate automatically.

Notes:

EAP firmware upgrade is required (EAP110 with EAP110(UN)_V1_160107, EAP120 with EAP120(UN)_V1_160107, EAP220 with EAP220(UN)_V1_151222 ,
EAP320(UN)_V1_160518, EAP330(EU)_V1_160518 or higher).

Date de publication: 2016-02-17 Langue: Anglais Taille du fichier: 90.49 MB
Système d'exploitation: WinXP/Vista/7/8/8.1/10/Server2008 (32/64bit)/Server2012 (64bit)

Modifications and Bug Fixes:

New Features/Enhancement:
1. Add multi-sites management function that manage EAPs in different groups.
2. Add WLAN group function that manage SSIDs in different groups.
2. Vouchers can be deleted in batch.
3. Add band steering and airtime fairness functions for some model.
4. Optimize access control, RSSI filter, clients statistic and log functions.
5. Improve stability of the controller software.
Bug Fixed:
1. Fixed the bug that after you configure SSID with special character like &#%, you can’t pass through Hotspot authentication.

 

Notes:

1. EAP firmware upgrade is required (EAP110 with EAP110(UN)_V1_160107, EAP120 with EAP120(UN)_V1_160107, EAP220 with EAP220(UN)_V1_151222 or higher).

Date de publication: 2015-07-23 Langue: Chinois (simplifié) Taille du fichier: 90 MB
Système d'exploitation: WinXP/Vista/7/8/8.1/10/Server2008(32/64bit)/Server2012(64bit)

Modifications and Bug Fixes:

New Features/Enhancement: 

  1. Support L3 management(manage EAPs at different subnets).
  2. Portal authentication now supports hotspot(voucher) and external portal server.
  3. Add advanced management functions such as scheduled reboot,rate limit and access control.

Notes:

  1. EAP firmware upgrade is required(EAP110 with EAP110_V1_150709 or higher and EAP120 with firmware EAP120_V1_150709 or higher).                
  2. Uninstall the privious version completely before installation.
Date de publication: 2015-05-08 Langue: Chinois (simplifié) Taille du fichier: 90 MB
Système d'exploitation: Windows XP/2003/Vista/7/8

Modifications and Bug Fixes:

New Features/Enhancement:
  1. Support management for dual band EAP products.
Bug Fixed:
  1. Fixed the bug that EAP Controller cannot start normally on some non-English operating systems.
  2. Fixed the bug that EAP Controller cannot wrok normally on some Windows Server systems when the built-in firewall is on.

Notes:

For EAP Series 
Date de publication: 2015-03-26 Langue: Chinois (simplifié) Taille du fichier: 89 MB
Système d'exploitation: WinXP/Vista/7/8/8.1/Server2008(32/64bit)/Server2012(64bit)

Modifications and Bug Fixes:

Bug Fixes:
1. Fixed the bug that EAP Controller can not launch up on Windows XP(64bit)and Windows Vista(64 bit);                    
2. Fixed the bug that the upload traffics and download traffics of the clients shown in the page of Statistics and Access Points are abnormal. 

Notes:

For EAP Series

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Date de publication: 2016-04-15 Langue: Anglais Taille du fichier: 62.45 MB
Système d'exploitation: Mac OS X 10.7/10.8/10.9/10.10/10.11

Modifications and Bug Fixes:

Only support Mac OS X system.

Notes:

For EAP series, including EAP110, EAP115, EAP120, EAP220, EAP320, EAP330, etc.

Date de publication: 2016-04-12 Langue: Anglais Taille du fichier: 3.39 MB
Système d'exploitation: WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Modifications and Bug Fixes:

First Discovery Utility released.

Notes:

For EAP series, including EAP110, EAP115, EAP120, EAP220, EAP320, EAP330,etc.

Code GPL

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: