Téléchargement pour EAP620 HD
Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
Plus Fold -
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
Plus Fold -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
Plus Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
Plus Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
Plus Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
Plus Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
Plus Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
Plus Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
Plus Fold -
How to Set Wireless SSID for Different Users via Omada SDN Controller
This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.
Plus Fold -
How to Configure No Authentication Portal via Omada SDN Controller
This video will show you how to configure No Authentication Portal via the Omada SDN Controller.
Plus Fold -
How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller
This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.
Plus Fold -
How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller
This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.
Plus Fold -
How to Configure Fast Roaming via the Omada SDN Controller
This video will show you how to configure Fast Roaming via the Omada SDN Controller.
Plus Fold -
How to Build an Omada Mesh Network via the Omada SDN Controller
This video will show you how to build an omada mesh network via the Omada SDN Controller.
Plus Fold -
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
Plus Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Plus Fold
FAQs
- Comment optimiser les performances WiFi des points d'accès EAP
- Annonce de l'arrêt de Facebook Wi-Fi
- Modèle de code source pour le portail Web externe (Controller 4.1.5 ou supérieur)
- Questions fréquentes sur la solution Omada SDN et la mise à niveau et l'administration
- Comment configurer le filtrage MAC pour EAP en mode Contrôleur
- Les exigences de l'établissement d'un serveur de portail externe (ci-dessus Omada Controller 4.1.5)
- Utilisation du contrôleur pour configurer plusieurs SSID avec différents VLAN sur TP-Link Omada EAP et Switch pour fonctionner avec une passerelle non-Omada (Multi-Net NAT pris en charge)
- Que dois-je faire si je ne peux pas démarrer le contrôleur Omada dans le système Windows (contrôleur 4.1.5 ou supérieur)
- Comment utiliser le mode de récupération pour récupérer le firmware pour EAP ?
- Comment gérer les appareils Omada sur différents sites à l'aide du contrôleur Omada SDN via le transfert de port (contrôleur 5.0 ou supérieur)
- Comment gérer les appareils Omada sur différents sites à l'aide du contrôleur Omada SDN via VPN (contrôleur 5.0 ou supérieur)
- Quelle est la différence entre l'administrateur principal, l'administrateur et le visualiseur
- Comment utiliser l'outil Ping dans Omada APP
- Qu'est-ce que 2FA et comment l'utiliser sur la plateforme Omada
- Comment configurer un maillage autonome dans l'application Omada
- Comment configurer la fonction de portail sur Omada Controller?
- Comment configurer le VLAN de gestion en mode autonome pour EAP
- Guide de configuration sur l'authentification EAP-TLS pour WPA-Enterprise (avec FreeRADIUS)
- Comment configurer l'authentification de bon sur le contrôleur Omada?
- Comment utiliser iPerf pour tester le débit entre l'EAP et le client WiFi ?
- Comment rétrograder le firmware d'EAP s'il est anormal après la mise à jour ?
- Comment configurer la fonction de groupe WLAN sur le contrôleur SDN ? (Nouvelle interface utilisateur)
- Comment désactiver le WiFi 5 GHz pour Omada EAP ?
- Présentation de l'alimentation Omada EAP
- Comment créer un réseau maillé via Omada EAP dans votre maison
- Que dois-je faire lorsque le contrôleur logiciel Omada (V4) ne parvient pas à détecter les périphériques ?
- Explication de l'échec de l'authentification du portail après l'extension d'EAP avec les répéteurs WiFi
- Foire aux questions sur le réseau Mesh EAP
- Qu'est-ce que l'itinérance rapide (Fast Roaming) des produits WiFi professionnels TP-Link?
- Comment configurer les paramètres sans fil de base de mon TP-Link EAP en mode autonome?
- Comment configurer les paramètres WiFi de base de mon TP-Link EAP via Omada Controller?
- Questions courantes sur le périphérique TP-Link EAP lorsqu'il est utilisé dans le réseau domestique
- Pourquoi mon contrôleur Omada ne peut pas gérer le dernier EAP ?
Apps
- Omada APP
TP-Link Omada vous permet de configurer les paramètres, de surveiller l'état du réseau et de gérer les clients, le tout depuis le confort d'un smartphone ou d'une tablette. En savoir plus sur les appareils compatibles .
Note: Le switch/routeur SDN est compatible avec l'application Omada uniquement en mode contrôleur. Pour utiliser Omada, veuillez mettre à jour le micrologiciel de votre appareil vers la dernière version.