Contrôleur Logiciel

Le contrôleur EAP permet de gérer plusieurs points d'accès EAP de manière intensive.

EAP Controller_V2.5.4_Windows

Téléchargement
Date de publication: 2018-01-05 Langue: Anglais Taille du fichier: 113.15MB
Système d'Exploitation: Windows 7/8/10/Server

New Features/Improvements:
User Interface improvements
Bug Fixed:
1. Fix: COMODO security software will cause Initialization failure of the Omada Controller
2. Fix: Logo picture with transparent background will become black when uploaded in portal login page.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

EAP Controller_V1.1.3

Téléchargement
Date de publication: 2015-05-08 Langue: Chinois (simplifié) Taille du fichier: 90 MB
Système d'Exploitation: Windows XP/2003/Vista/7/8

Modifications and Bug Fixes:

New Features/Enhancement:
  1. Support management for dual band EAP products.
Bug Fixed:
  1. Fixed the bug that EAP Controller cannot start normally on some non-English operating systems.
  2. Fixed the bug that EAP Controller cannot wrok normally on some Windows Server systems when the built-in firewall is on.

Notes:

For EAP Series 

Omada Discovery Utility

EAP Discovery_V1.0.3_Windows

Téléchargement
Date de publication: 2016-04-12 Langue: Anglais Taille du fichier: 3.39 MB
Système d'Exploitation: WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Modifications and Bug Fixes:

First Discovery Utility released.

Notes:

For EAP series, including EAP110, EAP115, EAP120, EAP220, EAP320, EAP330,etc.

Setup Video

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Plus Fold

FAQs

Firmware / Micrologiciel

Une mise à jour du micrologiciel (Firmware)  interne des produits peut résoudre les problèmes de la version précédente et améliorer les performances du produit.

Pout procéder

IMPORTANT: Pour éviter les échecs de mise à jour, veuillez lire ce qui suit avec attention, avant de procéder ; en cas de doute n’hésitez pas à contacter le support technique TP-Link.

  • Il est recommandé de télécharger les micrologiciels uniquement depuis le site Web TP-Link.fr. Si votre matériel a été commercialisé par une autre succursale TP-Link cliquez ici.
  • Déterminez la version matérielle de votre produit TP-Link avant de rechercher les micrologiciels conçu pour cette version.
    Un micrologiciel non spécifiquement conçu pour la version matérielle de votre produit peut endommager ce dernier et en annuler la garantie.
    (Sauf spécifications contraires, les sous-versions matérielles acceptent les micrologiciels de la version principale : V2 = V2.0, V2.1, V2.x…
    en revanche V1 ne peut recevoir les micrologiciels de V2, V3, Vx et inversement)
  • Comment trouver la version matérielle d’un produit TP-Link ?
  • Ne coupez PAS l'alimentation électrique du produit TP-Link pendant sa mise à jour, cela pourrait l’endommager de façon permanente.
  • Ne procédez PAS à la mise à jour du micrologiciel via une connexion Wi-Fi (sauf bien entendu pour les produits dépourvus de connexion Ethernet).
  • Il est très fortement recommandé de procéder à la mise à jour depuis un ordinateur non connecté à internet (uniquement durant le temps de cette mise à jour).
  • Utilisez un logiciel (au cas où votre système d’exploitation n’intègre pas cette fonctionnalité) pour extraire le micrologiciel du fichier (.zip ou .rar) que vous aurez téléchargé depuis notre site.
  • Aucun micrologiciel n’est exécutable directement il faut passer par l’interface du produit ou de l’utilitaire associé (cf. mode d’emploi du produit) pour procéder à la mise à jour.

EAP220(EU)_V1_171109

Téléchargement
Date de publication: 2017-11-09 Langue: Anglais Taille du fichier: 7.17 MB

Recommended Controller software version: Omada Controller v2.5.x

Modifications and Bug Fixes:

Standalone Mode:
1.Support configuring DNS on Static IP mode.
2.Change the prefix of the default SSID from TP-LINK to TP-Link.
3.Display hardware version on the monitor page.
4.Fixed the bug that only the first three Predefine Country under the Daylight Saving is available to be selected.
5.Fixed the bug that the 2.4G radio stops working in congested RF environment.
6.Fixed the bug that the web server hangs up if the Host field of the HTTP GET URL has no ":" character.

 

Controller Managed Mode:
1.Support Facebook Portal Authentication, SMS Portal Authentication and Local User Authentication.
2.Support Rate Limit and Traffic Limit in Voucher Portal Authentication and Local User Portal Authentication.
3.Support configuring DNS on Static IP mode.
4.Support binding different SSID with different Portal Authentication.
5.Support creating up to four Radius server list in Portal authentication.
6.External Portal URL supports subdirectory, for example https://portal.demo.com/1.
7.Radius password supports special characters.
8.Fixed the bug that the portal page fails to be redirected to when the Controller's http port is changed.
9.Fixed the bug that the 2.4G radio stops working in congested RF environment.
10.Fixed the bug that the page chaos on the EAP Controller when upgrade the EAP Controller from the earlier version(v2.3.x).

Notes:

1. For EAP220(EU) 
2. Your device's configuration won't be lost after upgrading.

EAP220(EU)_V1_170113

Téléchargement
Date de publication: 2017-01-13 Langue: Anglais Taille du fichier: 7.09 MB

Recommended Controller Software Version: Omada Controller v 2.4.x

New Features/Improvements:

1. Improved the compatibility when upgrading the EAP firmware from UN to EU version.

2. Optimized the WPA-Enterprise encryption.

Notes:

1. For EAP220 (EU)_V1.

2. Your device's configuration won't be lost after upgrading.

EAP220(EU)_V1_161117

Téléchargement
Date de publication: 2016-11-17 Langue: Anglais Taille du fichier: 7.08 MB

Recommended Controller Software Version: Omada Controller v 2.4.x

New Features/Improvements:

1. Add Management VLAN, only the host which in the same VLAN as EAP can manage it.

2. Add restart command in SSH.

3. Optimize the captive portal authentication. After EAP Controller offline, under Hotspot and External Portal Server mode, the authenticated users won't be affected, while other users can't get authenticated.

Notes:

1. For EAP220 (EU)_V1

2. Your device's configuration won't be lost after upgrading.

EAP220(EU)_V1_160401

Téléchargement
Date de publication: 2016-04-01 Langue: Anglais Taille du fichier: 6.86 MB

Modifications and Bug Fixes:

1.Improve stability of the EAP220
2.Fixed the bug that you cannot add Group Member when the MAC Group name contains any blank spaces.
3.Fixed the bug that the MAC Group cannot associated with the SSID which contains any blank spaces.

Notes:

1. You cannot downgrade to UN firmware with cluster mode anymore but can only upgrade to EU firmware after update.
2. Transmission power is compliant with CE.
3. If you upgrade this firmware, please also upgrade your EAP Controller to EAP Controller V2.4.4 or higher version.

EAP220(UN)_V1_151222

Téléchargement
Date de publication: 2015-12-22 Langue: Anglais Taille du fichier: 6.85 MB

Modifications and Bug Fixes:

New Features/Enhancement:

1. Add band steering function.
2. Optimize access control, RSSI filter, clients statistic and log functions.
3. Optimize the inform mechanism between EAP and EAP controller.
4. Improve stability of the EAP220.

Notes:

1.For EAP220(UN) V1.                                
2.Support EAP Controller V2.2.3 but cannot work with EAP Controller V2.0.3.
3.Your device's configuration won't be lost after upgrading.

Utiliser un firmware tiers non développé ni distribué par TP-Link dans les produits TP-Link

Certains firmwares officiels de produits TP-Link peuvent être remplacés par des firmwares tiers tels que : OpenWrt, DD-WRT, LEDE, Gargoyle etc.
TP-Link n'a aucune obligation de support concernant ces micrologiciels, et ne garantit en aucun cas performances et stabilité des produits qui seraient pourvus de ces firmwares.

L'altération fonctionnelle d’un produit consécutif à l’installation et/ou à l'utilisation d'un firmware tiers annulera de fait la garantie de ce produit.

 

Accès au code source soumis à licence GPL

Remarque : Les produits de TP-Link contiennent des portions de logiciel développées par des tiers, ce qui inclus du code soumis à la licence GNU (GPL), Version 1, Version 2, Version 3 ou GNU Lesser General Public License (" LGPL "). Vous pouvez utiliser le code concerné à condition de respecter les termes de la licence.

Vous pouvez consulter, imprimer et télécharger les conditions de la licence GPL ici. Vous trouverez les codes source GPL des logiciels respectifs utilisés dans les produits TP-Link pour le téléchargement direct et d'autres informations, y compris une liste des logiciels TP-Link contenant du code logiciel soumis à licence GPL dans le Centre de code GPL.

Les programmes respectifs sont distribués SANS AUCUNE GARANTIE ; sans même la garantie implicite de QUALITÉ MARCHANDE ou d'ADÉQUATION À UN USAGE PARTICULIER. Voir la licence publique générale GNU respective pour plus de détails.

GPL Code

De United States?

Infos produits, événements, services pour votre pays.