EAP110-Outdoor | Omada Network Support

How to Configure Installation Type for Omada Outdoor AP

Regulations on indoor/outdoor wireless use vary by region, impacting Omada Outdoor AP performance and compliance. If deployed incorrectly, certain 5GHz channels may be restricted. For example, in Germany, CE regulations prohibit outdoor use of UNII-1 and UNII-2A bands, while all UNII-1 to UNII-2C bands are allowed indoors. To ensure compliance and optimal performance, Omada Outdoor APs support Installation Type, allowing users to adjust settings based on deployment scenarios.

Troubleshooting Guide

02-26-2025

7430

Getting started with the standalone EAP

This article introduces how to quickly set up the Omada EAP in Standalone mode.

Configuration Guide

Standalone

12-03-2024

30301

How to configure Fast Roaming on Omada Controller

This article describes how to configure the Fast Roaming function on the Omada Controller to optimize client roaming performance of Omada APs.

Configuration Guide

Controller

11-08-2024

9962

How to configure SSID VLAN on Omada AP with Third-Party Gateway

This article introduces how to configure SSID VLAN on the Omada APs to realize VLAN isolation.

Configuration Guide

Controller

11-07-2024

9154

How to Configure 802.11 Rate Control on Omada Controller

If your network includes a significant number of legacy wireless clients using 802.11a/b/g standards, and most clients are experiencing degraded performance (such as slow webpage loading, video buffering, or high latency), you can enhance network efficiency by adequately configuring the 802.11 Rate Control feature in the Omada Controller.

Configuration Guide

Controller

11-07-2024

7243

Should I keep the Omada Controller running after configuration?

This article explains whether you need to keep an Omada Controller running to use different functions of APs. Objective

FAQ

Controller

11-07-2024

9636

What can I do If Omada App can’t find my AP

This article will introduce what you can do when Omada App can’t find your standalone AP, such as turn off VPN on mobile phone, enable local network, reboot and reset AP, etc.

Troubleshooting Guide

App

10-29-2024

7299

How to get sarted with Standalone Access Points without Omada Controller

This article will help you start with Standalone Access Points without an Omada Controller.

Configuration Guide

Standalone

10-29-2024

9301

How to configure abnormal on Omada Pro Controller

This article will introduce how to configure the Abnormal feature on the Omada Pro Controller. Thanks to the intelligent anomaly detection system that records abnormal incidents, identifies their causes and offers maintenance suggestions, users can analyze network issues efficiently and enjoy a simple, intuitive, and reliable solution.

Configuration Guide

10-21-2024

5487

Understanding and implementing Minimum RSSI

This article introduces what is RSSI, how to understand minimum RSSI, why setting minimum RSSI is important and how to implement this setting in Omada APs.

Configuration Guide

Controller

08-29-2024

4600