-
Home
Modems/ Gateways
Your doorway to the internet
Network Expansion
Easy ways to expand and enhance your network
SOHO Switches
Keeping your home wired for quality connections
Adapters
Equip your devices for a faster Wi-Fi
Accessories
Everything else you need for a connected lifestyle
-
Smart Home
Home Security
Keeping an eye on what matters
Smart Plugs
Smarten up your home devices
Smart Bulbs
Light for every occasion
Smart Switches
More than just on and off
-
Business
Omada Cloud SDN
The smarter cloud solution for business networking
Switches
High-Speed wired networking from L3 managed to unmanaged
Omada Access Points
Professional business Wi-Fi with centralized management
Pharos Wireless Broadband
Ideal for long range wireless broadband networking
SafeStream Router
Secure VPN and Load Balance gateways to the business
VIGI Surveillance
VIGI video surveillance is dedicated to your security
-
Service Provider
Wi-Fi Routers
The reliable choice for home networking
Whole-Home Mesh
A seamless, intelligent and easy-to-configure mesh network
VDSL
Capable of high-speed network and integrated broadband applications
GPON
The leading technology for delivering gigabit Internet services
How to configure TP-Link Router in Access Point mode?（case2）
In this mode, your router connects to your existing router via an Ethernet cable and extends the wireless coverage of your existing network. Advanced functions like NAT, Parental Controls, and QoS are not supported in this mode.
Note: Old firmware may not support Access Point mode. If you don’t see this mode, please upgrade the firmware.
Here we take Archer C2300 for demonstration.
1. Connect the router’s Internet/WAN port to the existing network using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
3. Go to Advanced > Operation Mode, select Access Point and click Save. Log in to the router via http://tplinkwifi.net after the router reboots.
4. Go to Quick Setup or Settings > Wireless > Wireless Settings and set the SSIDs and passwords for the wireless network. Click Next/Save to finish the setting.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.