Supported Public MIBs for TP-Link Switches

This guide applies to:

T1500/T1500G/T1600G/T1700G/T1700X/T2500/T2500G/T2600G/T2700G/T3700G

This table shows the supported public MIBs on TP-Link switches. Note that some nodes may not be supported on your switch if the corresponding features are not supported on your switch.

Node

OID

Access Right

Object Type

Description

MIB Filename

system

1.3.6.1.2.1.1

System group. The system group includes information about the system on which the entity resides. Object in this group are useful for fault management and configuration management.

sysDescr

1.3.6.1.2.1.1.1

Read-Only

DisplayString

A textual description of the entity.

RFC1213.mib

sysObjectID

1.3.6.1.2.1.1.2

Read-Only

Object Identifier

The vendor’s authoritative identification of the network management subsystem contained in the entity.

RFC1213.mib

sysUpTime

1.3.6.1.2.1.1.3

Read-Only

TimeTicks

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

RFC1213.mib

sysContact

1.3.6.1.2.1.1.4

Read-Write

DisplayString

The textual identification of the contact person for this managed node, together with information on how to contact this person.

RFC1213.mib

sysName

1.3.6.1.2.1.1.5

Read-Write

DisplayString

An administratively-assigned name for this managed node. By convention, this is the node’s fully-qualified domain name.

RFC1213.mib

sysLocation

1.3.6.1.2.1.1.6

Read-Write

DisplayString

The physical location of this node.

RFC1213.mib

sysServices

1.3.6.1.2.1.1.7

Read-Only

Integer

A value which indicates the set of services that this entity primarily offers.

RFC1213.mib

interface

1.3.6.1.2.1.2

Interfaces group. The interfaces object group contains information about each interface on a network device. This group provides useful information on fault management, configuration management, performance management and accounting management.

ifNumber

1.3.6.1.2.1.2.1

Read-Only

Integer

The number of network interfaces present on this system.

RFC1213.mib

ifTable

1.3.6.1.2.1.2.2

Not-Accessible

Sequence of IfEntry

A list of interface entries.

RFC1213.mib

ifEntry

1.3.6.1.2.1.2.2.1

Not-Accessible

IfEntry

An interface entry containing objects at the subnetwork layer and below for a particular interface.

RFC1213.mib

ifIndex

1.3.6.1.2.1.2.2.1.1

Read-Only

Integer

A unique value for each interface.

RFC1213.mib

ifDescr

1.3.6.1.2.1.2.2.1.2

Read-Only

DisplayString

A textual string containing information about the interface.

RFC1213.mib

ifType

1.3.6.1.2.1.2.2.1.3

Read-Only

Integer

The type of interface, distinguished according to the physical/link protocol(s) immediately ‘below’ the network layer in the protocol stack.

RFC1213.mib

ifMtu

1.3.6.1.2.1.2.2.1.4

Read-Only

Integer

The size of the largest datagram which can be sent/received on the interface, specified in octets.

RFC1213.mib

ifSpeed

1.3.6.1.2.1.2.2.1.5

Read-Only

Gauge

An estimate of the interface's current bandwidth in bits per second.

RFC1213.mib

ifPhysAddress

1.3.6.1.2.1.2.2.1.6

Read-Only

PhysAddress

The interface’s address at the protocol layer immediately 'below' the network layer in the protocol stack.

RFC1213.mib

ifAdminStatus

1.3.6.1.2.1.2.2.1.7

Read-Write

Integer

The desired state of the interface.

RFC1213.mib

ifOperStatus

1.3.6.1.2.1.2.2.1.8

Read-Only

Integer

The current operational state of the interface.

RFC1213.mib

ifLastChange

1.3.6.1.2.1.2.2.1.9

Read-Only

TimeTicks

The value of sysUpTime at the time the interface entered its current operational state.

RFC1213.mib

ifInOctets

1.3.6.1.2.1.2.2.1.10

Read-Only

Counter

The total number of octets received on the interface, including framing characters.

RFC1213.mib

ifInUcastPkts

1.3.6.1.2.1.2.2.1.11

Read-Only

Counter

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

RFC1213.mib

ifInNUcastPkts

1.3.6.1.2.1.2.2.1.12

Read-Only

Counter

The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

RFC1213.mib

ifInDiscards

1.3.6.1.2.1.2.2.1.13

Read-Only

Counter

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

RFC1213.mib

ifInErrors

1.3.6.1.2.1.2.2.1.14

Read-Only

Counter

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

RFC1213.mib

ifInUnknownProtos

1.3.6.1.2.1.2.2.1.15

Read-Only

Counter

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

RFC1213.mib

ifOutOctets

1.3.6.1.2.1.2.2.1.16

Read-Only

Counter

The total number of octets transmitted out of the interface, including framing characters.

RFC1213.mib

ifOutUcastPkts

1.3.6.1.2.1.2.2.1.17

Read-Only

Counter

The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

RFC1213.mib

ifOutNUcastPkts

1.3.6.1.2.1.2.2.1.18

Read-Only

Counter

The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

RFC1213.mib

ifOutDiscards

1.3.6.1.2.1.2.2.1.19

Read-Only

Counter

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.

RFC1213.mib

ifOutErrors

1.3.6.1.2.1.2.2.1.20

Read-Only

Counter

The number of outbound packets that could not be transmitted because of errors.

RFC1213.mib

ifOutQLen

1.3.6.1.2.1.2.2.1.21

Read-Only

Gauge

The length of the output packet queue (in packets).

RFC1213.mib

ifSpecific

1.3.6.1.2.1.2.2.1.22

Read-Only

Object Identifier

A reference to MIB definitions specific to the particular media being used to realize the interface.

RFC1213.mib

ip

1.3.6.1.2.1.4

ipForwarding

1.3.6.1.2.1.4.1

Read-Write

Integer

The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host).

RFC1213.mib

ipDefaultTTL

1.3.6.1.2.1.4.2

Read-Write

Integer

The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.

RFC1213.mib

ipInReceives

1.3.6.1.2.1.4.3

Read-Only

Counter

The total number of input datagrams received from interfaces, including those received in error.

RFC1213.mib

ipInHdrErrors

1.3.6.1.2.1.4.4

Read-Only

Counter

The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.

RFC1213.mib

ipInAddrErrors

1.3.6.1.2.1.4.5

Read-Only

Counter

The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.

RFC1213.mib

ipForwDatagrams

1.3.6.1.2.1.4.6

Read-Only

Counter

The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination.

RFC1213.mib

ipInUnknownProtos

1.3.6.1.2.1.4.7

Read-Only

Counter

The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.

RFC1213.mib

ipInDiscards

1.3.6.1.2.1.4.8

Read-Only

Counter

The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space).

RFC1213.mib

ipInDelivers

1.3.6.1.2.1.4.9

Read-Only

Counter

The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).

RFC1213.mib

ipOutRequests

1.3.6.1.2.1.4.10

Read-Only

Counter

The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission.

RFC1213.mib

ipOutDiscards

1.3.6.1.2.1.4.11

Read-Only

Counter

The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space).

RFC1213.mib

ipOutNoRoutes

1.3.6.1.2.1.4.12

Read-Only

Counter

The number of IP datagrams discarded because no route could be found to transmit them to their destination.

RFC1213.mib

ipReasmTimeout

1.3.6.1.2.1.4.13

Read-Only

Integer

The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

RFC1213.mib

ipReasmReqds

1.3.6.1.2.1.4.14

Read-Only

Counter

The number of IP fragments received which needed to be reassembled at this entity.

RFC1213.mib

ipReasmOKs

1.3.6.1.2.1.4.15

Read-Only

Counter

The number of IP datagrams successfully re-assembled.

RFC1213.mib

ipReasmFails

1.3.6.1.2.1.4.16

Read-Only

Counter

The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc).

RFC1213.mib

ipFragOKs

1.3.6.1.2.1.4.17

Read-Only

Counter

The number of IP datagrams that have been successfully fragmented at this entity.

RFC1213.mib

ipFragFails

1.3.6.1.2.1.4.18

Read-Only

Counter

The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.

RFC1213.mib

ipFragCreates

1.3.6.1.2.1.4.19

Read-Only

Counter

The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.

RFC1213.mib

ipAddrTable

1.3.6.1.2.1.4.20

Not-Accessible

Sequence of IpAddrEntry

The table of addressing information relevant to this entity's IP addresses.

RFC1213.mib

ipAddrEntry

1.3.6.1.2.1.4.20.1

Not-Accessible

IpAddrEntry

The addressing information for one of this entity's IP addresses.

RFC1213.mib

ipAdEntAddr

1.3.6.1.2.1.4.20.1.1

Read-Only

IpAddress

The IP address to which this entry's addressing information pertains.

RFC1213.mib

ipAdEntIfIndex

1.3.6.1.2.1.4.20.1.2

Read-Only

Integer

The index value which uniquely identifies the interface to which this entry is applicable.

RFC1213.mib

ipAdEntNetMask

1.3.6.1.2.1.4.20.1.3

Read-Only

IpAddress

The subnet mask associated with the IP address of this entry.

RFC1213.mib

ipAdEntBcastAddr

1.3.6.1.2.1.4.20.1.4

Read-Only

Integer

The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry.

RFC1213.mib

ipAdEntReasmMaxSize

1.3.6.1.2.1.4.20.1.5

Read-Only

Integer

The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.

RFC1213.mib

ipNetToMediaTable

1.3.6.1.2.1.4.22

Not-Accessible

Sequence of IpNetToMediaEntry

The IP Address Translation table used for mapping from IP addresses to physical addresses.

RFC1213.mib

ipNetToMediaEntry

1.3.6.1.2.1.4.22.1

Not-Accessible

IpNetToMediaEntry

Each entry contains one IpAddress to 'physical' address equivalence.

RFC1213.mib

ipNetToMediaIfIndex

1.3.6.1.2.1.4.22.1.1

Read-Create

Integer

The interface on which this entry's equivalence is effective.

RFC1213.mib

ipNetToMediaPhysAddress

1.3.6.1.2.1.4.22.1.2

Read-Create

PhysAddress

The media-dependent 'physical' address.

RFC1213.mib

ipNetToMediaNetAddress

1.3.6.1.2.1.4.22.1.3

Read-Create

IpAddress

The IpAddress corresponding to the media-dependent 'physical' address.

RFC1213.mib

ipNetToMediaType

1.3.6.1.2.1.4.22.1.4

Read-Write

Integer

The type of mapping.

RFC1213.mib

ipRoutingDiscards

1.3.6.1.2.1.4.23

Read-Only

Counter

The number of routing entries which were chosen to be discarded even though they are valid.

RFC1213.mib

icmp

1.3.6.1.2.1.5

icmpInMsgs

1.3.6.1.2.1.6

Read-Only

Counter

The total number of ICMP messages which the entity received.

RFC1213.mib

icmpInErrors

1.3.6.1.2.1.7

Read-Only

Counter

The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).

RFC1213.mib

icmpInDestUnreachs

1.3.6.1.2.1.16

Read-Only

Counter

The number of ICMP Destination Unreachable messages received.

RFC1213.mib

icmpInTimeExcds

1.3.6.1.2.1.17

Read-Only

Counter

The number of ICMP Time Exceeded messages received.

RFC1213.mib

icmpInParmProbs

1.3.6.1.2.1.31

Read-Only

Counter

The number of ICMP Parameter Problem messages received.

RFC1213.mib

icmpInSrcQuenchs

1.3.6.1.2.1.67

Read-Only

Counter

The number of ICMP Source Quench messages received.

RFC1213.mib

icmpInRedirects

1.3.6.1.2.1.80

Read-Only

Counter

The number of ICMP Redirect messages received.

RFC1213.mib

icmpInEchos

1.3.6.1.2.1.81

Read-Only

Counter

The number of ICMP Echo (request) messages received.

RFC1213.mib

icmpInEchoReps

1.0.8802.1.1.2

Read-Only

Counter

The number of ICMP Echo Reply messages received.

RFC1213.mib

icmpInTimestamps

1.3.6.1.2.1.5.10

Read-Only

Counter

The number of ICMP Timestamp (request) messages received.

RFC1213.mib

icmpInTimestampReps

1.3.6.1.2.1.5.11

Read-Only

Counter

The number of ICMP Timestamp Reply messages received.

RFC1213.mib

icmpInAddrMasks

1.3.6.1.2.1.5.12

Read-Only

Counter

The number of ICMP Address Mask Request messages received.

RFC1213.mib

icmpInAddrMaskReps

1.3.6.1.2.1.5.13

Read-Only

Counter

The number of ICMP Address Mask Reply messages received.

RFC1213.mib

icmpOutMsgs

1.3.6.1.2.1.5.14

Read-Only

Counter

The total number of ICMP messages which this entity attempted to send.

RFC1213.mib

icmpOutErrors

1.3.6.1.2.1.5.15

Read-Only

Counter

The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.

RFC1213.mib

icmpOutDestUnreachs

1.3.6.1.2.1.5.16

Read-Only

Counter

The number of ICMP Destination Unreachable messages sent.

RFC1213.mib

icmpOutTimeExcds

1.3.6.1.2.1.5.17

Read-Only

Counter

The number of ICMP Time Exceeded messages sent.

RFC1213.mib

icmpOutParmProbs

1.3.6.1.2.1.5.18

Read-Only

Counter

The number of ICMP Parameter Problem messages sent.

RFC1213.mib

icmpOutSrcQuenchs

1.3.6.1.2.1.5.19

Read-Only

Counter

The number of ICMP Source Quench messages sent.

RFC1213.mib

icmpOutRedirects

1.3.6.1.2.1.5.20

Read-Only

Counter

The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.

RFC1213.mib

icmpOutEchos

1.3.6.1.2.1.5.21

Read-Only

Counter

The number of ICMP Echo (request) messages sent.

RFC1213.mib

icmpOutEchoReps

1.3.6.1.2.1.5.22

Read-Only

Counter

The number of ICMP Echo Reply messages sent.

RFC1213.mib

icmpOutTimestamps

1.3.6.1.2.1.5.23

Read-Only

Counter

The number of ICMP Timestamp (request) messages sent.

RFC1213.mib

icmpOutTimestampReps

1.3.6.1.2.1.5.24

Read-Only

Counter

The number of ICMP Timestamp Reply messages sent.

RFC1213.mib

icmpOutAddrMasks

1.3.6.1.2.1.5.25

Read-Only

Counter

The number of ICMP Address Mask Request messages sent.

RFC1213.mib

icmpOutAddrMaskReps

1.3.6.1.2.1.5.26

Read-Only

Counter

The number of ICMP Address Mask Reply messages sent.

RFC1213.mib

tcp

1.3.6.1.2.1.6

tcpRtoAlgorithm

1.3.6.1.2.1.6.1

Read-Only

Integer

The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.

RFC1213.mib

tcpRtoMin

1.3.6.1.2.1.6.2

Read-Only

Integer

The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds.

RFC1213.mib

tcpRtoMax

1.3.6.1.2.1.6.3

Read-Only

Integer

The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds.

RFC1213.mib

tcpMaxConn

1.3.6.1.2.1.6.4

Read-Only

Integer

The limit on the total number of TCP connections the entity can support.

RFC1213.mib

tcpActiveOpens

1.3.6.1.2.1.6.5

Read-Only

Counter

The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.

RFC1213.mib

tcpPassiveOpens

1.3.6.1.2.1.6.6

Read-Only

Counter

The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

RFC1213.mib

tcpAttemptFails

1.3.6.1.2.1.6.7

Read-Only

Counter

The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.

RFC1213.mib

tcpEstabResets

1.3.6.1.2.1.6.8

Read-Only

Counter

The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.

RFC1213.mib

tcpCurrEstab

1.3.6.1.2.1.6.9

Read-Only

Gauge

The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.

RFC1213.mib

tcpInSegs

1.3.6.1.2.1.6.10

Read-Only

Counter

The total number of segments received, including those received in error. This count includes segments received on currently established connections.

RFC1213.mib

tcpOutSegs

1.3.6.1.2.1.6.11

Read-Only

Counter

The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.

RFC1213.mib

tcpRetransSegs

1.3.6.1.2.1.6.12

Read-Only

Counter

The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.

RFC1213.mib

tcpConnTable

1.3.6.1.2.1.6.13

Not-Accessible

Sequence of TcpConnEntry

A table containing TCP connection-specific information.

RFC1213.mib

tcpConnEntry

1.3.6.1.2.1.6.13.1

Not-Accessible

TcpConnEntry

Information about a particular current TCP connection.

RFC1213.mib

tcpConnState

1.3.6.1.2.1.6.13.1.1

Read-Write

Integer

The state of this TCP connection.

RFC1213.mib

tcpConnLocalAddress

1.3.6.1.2.1.6.13.1.2

Read-Only

IpAddress

The local IP address for this TCP connection.

RFC1213.mib

tcpConnLocalPort

1.3.6.1.2.1.6.13.1.3

Read-Only

Integer

The local port number for this TCP connection.

RFC1213.mib

tcpConnRemAddress

1.3.6.1.2.1.6.13.1.4

Read-Only

IpAddress

The remote IP address for this TCP connection.

RFC1213.mib

tcpConnRemPort

1.3.6.1.2.1.6.13.1.5

Read-Only

Integer

The remote port number for this TCP connection.

RFC1213.mib

tcpInErrs

1.3.6.1.2.1.6.14

Read-Only

Counter

The total number of segments received in error.

RFC1213.mib

tcpOutRsts

1.3.6.1.2.1.6.15

Read-Only

Counter

The number of TCP segments sent containing the RST flag.

RFC1213.mib

udp

1.3.6.1.2.1.7

udpInDatagrams

1.3.6.1.2.1.7.1

Read-Only

Counter

The total number of UDP datagrams delivered to UDP users.

RFC1213.mib

udpNoPorts

1.3.6.1.2.1.7.2

Read-Only

Counter

The total number of received UDP datagrams for which there was no application at the destination port.

RFC1213.mib

udpInErrors

1.3.6.1.2.1.7.3

Read-Only

Counter

The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.

RFC1213.mib

udpOutDatagrams

1.3.6.1.2.1.7.4

Read-Only

Counter

The total number of UDP datagrams sent from this entity.

RFC1213.mib

udpTable

1.3.6.1.2.1.7.5

Not-Accessible

Sequence of UdpEntry

A table containing UDP listener information.

RFC1213.mib

udpEntry

1.3.6.1.2.1.7.5.1

Not-Accessible

UdpEntry

Information about a particular current UDP listener.

RFC1213.mib

udpLocalAddress

1.3.6.1.2.1.7.5.1.1

Read-Only

IpAddress

The local IP address for this UDP listener.

RFC1213.mib

udpLocalPort

1.3.6.1.2.1.7.5.1.2

Read-Only

Integer

The local port number for this UDP listener.

RFC1213.mib

rmon

1.3.6.1.2.1.16

Remote network monitoring.

statistics

1.3.6.1.2.1.16.1

The ethernet statistics group.

RFC1757-RMON.mib

etherStatsTable

1.3.6.1.2.1.16.1.1

Not-Accessible

Sequence of EtherStatsEntry

A list of Ethernet statistics entries.

RFC1757-RMON.mib

etherStatsEntry

1.3.6.1.2.1.16.1.1.1

Not-Accessible

EtherStatsEntry

A collection of statistics kept for a particular Ethernet interface.

RFC1757-RMON.mib

etherStatsIndex

1.3.6.1.2.1.16.1.1.1.1

Read-Only

Integer32

The value of this object uniquely identifies this etherStats entry.

RFC1757-RMON.mib

etherStatsDataSource

1.3.6.1.2.1.16.1.1.1.2

Read-Create

Object Identifier

This object identifies the source of the data that this etherStats entry is configured to analyze.

RFC1757-RMON.mib

etherStatsDropEvents

1.3.6.1.2.1.16.1.1.1.3

Read-Only

Counter32

The total number of events in which packets were dropped by the probe due to lack of resources.

RFC1757-RMON.mib

etherStatsOctets

1.3.6.1.2.1.16.1.1.1.4

Read-Only

Counter32

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts

1.3.6.1.2.1.16.1.1.1.5

Read-Only

Counter32

The total number of packets (including bad packets, broadcast packets, and multicast packets) received.

RFC1757-RMON.mib

etherStatsBroadcastPkts

1.3.6.1.2.1.16.1.1.1.6

Read-Only

Counter32

The total number of good packets received that were directed to the broadcast address.

RFC1757-RMON.mib

etherStatsMulticastPkts

1.3.6.1.2.1.16.1.1.1.7

Read-Only

Counter32

The total number of good packets received that were directed to a multicast address.

RFC1757-RMON.mib

etherStatsCRCAlignErrors

1.3.6.1.2.1.16.1.1.1.8

Read-Only

Counter32

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

RFC1757-RMON.mib

etherStatsUndersizePkts

1.3.6.1.2.1.16.1.1.1.9

Read-Only

Counter32

The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.

RFC1757-RMON.mib

etherStatsOversizePkts

1.3.6.1.2.1.16.1.1.1.10

Read-Only

Counter32

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.

RFC1757-RMON.mib

etherStatsFragments

1.3.6.1.2.1.16.1.1.1.11

Read-Only

Counter32

The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

RFC1757-RMON.mib

etherStatsJabbers

1.3.6.1.2.1.16.1.1.1.12

Read-Only

Counter32

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

RFC1757-RMON.mib

etherStatsCollisions

1.3.6.1.2.1.16.1.1.1.13

Read-Only

Counter32

The best estimate of the total number of collisions on this Ethernet segment.

RFC1757-RMON.mib

etherStatsPkts64Octets

1.3.6.1.2.1.16.1.1.1.14

Read-Only

Counter32

The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts65to127Octets

1.3.6.1.2.1.16.1.1.1.15

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts128to255Octets

1.3.6.1.2.1.16.1.1.1.16

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts256to511Octets

1.3.6.1.2.1.16.1.1.1.17

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts512to1023Octets

1.3.6.1.2.1.16.1.1.1.18

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsPkts1024to1518Octets

1.3.6.1.2.1.16.1.1.1.19

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherStatsOwner

1.3.6.1.2.1.16.1.1.1.20

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

RFC1757-RMON.mib

etherStatsStatus

1.3.6.1.2.1.16.1.1.1.21

Read-Create

Integer

The status of this etherStats entry.

RFC1757-RMON.mib

history

1.3.6.1.2.1.16.2

The history group.

RFC1757-RMON.mib

historyControlTable

1.3.6.1.2.1.16.2.1

Not-Accessible

Sequence of HistoryControlEntry

A list of history control entries.

RFC1757-RMON.mib

historyControlEntry

1.3.6.1.2.1.16.2.1.1

Not-Accessible

HistoryControlEntry

A list of parameters that set up a periodic sampling of statistics.

RFC1757-RMON.mib

historyControlIndex

1.3.6.1.2.1.16.2.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the historyControl table.

RFC1757-RMON.mib

historyControlDataSource

1.3.6.1.2.1.16.2.1.1.2

Read-Create

Object Identifier

This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry.

RFC1757-RMON.mib

historyControlBucketsRequested

1.3.6.1.2.1.16.2.1.1.3

Read-Create

Integer32

The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry.

RFC1757-RMON.mib

historyControlBucketsGranted

1.3.6.1.2.1.16.2.1.1.4

Read-Only

Integer32

The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry.

RFC1757-RMON.mib

historyControlInterval

1.3.6.1.2.1.16.2.1.1.5

Read-Create

Integer32

The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour).

RFC1757-RMON.mib

historyControlOwner

1.3.6.1.2.1.16.2.1.1.6

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

RFC1757-RMON.mib

historyControlStatus

1.3.6.1.2.1.16.2.1.1.7

Read-Create

EntryStatus

The status of this historyControl entry.

RFC1757-RMON.mib

etherHistoryTable

1.3.6.1.2.1.16.2.2

Not-Accessible

Sequence of EtherHistoryEntry

A list of Ethernet history entries.

RFC1757-RMON.mib

etherHistoryEntry

1.3.6.1.2.1.16.2.2.1

Not-Accessible

EtherHistoryEntry

An historical sample of Ethernet statistics on a particular Ethernet interface.

RFC1757-RMON.mib

etherHistoryIndex

1.3.6.1.2.1.16.2.2.1.1

Read-Only

Integer32

The history of which this entry is a part.

RFC1757-RMON.mib

etherHistorySampleIndex

1.3.6.1.2.1.16.2.2.1.2

Read-Only

Integer32

An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.

RFC1757-RMON.mib

etherHistoryIntervalStart

1.3.6.1.2.1.16.2.2.1.3

Read-Only

TimeTicks

The value of sysUpTime at the start of the interval over which this sample was measured.

RFC1757-RMON.mib

etherHistoryOctets

1.3.6.1.2.1.16.2.2.1.5

Read-Only

Counter32

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

RFC1757-RMON.mib

etherHistoryPkts

1.3.6.1.2.1.16.2.2.1.6

Read-Only

Counter32

The number of packets (including bad packets) received during this sampling interval.

RFC1757-RMON.mib

etherHistoryBroadcastPkts

1.3.6.1.2.1.16.2.2.1.7

Read-Only

Counter32

The number of good packets received during this sampling interval that were directed to the broadcast address.

RFC1757-RMON.mib

etherHistoryMulticastPkts

1.3.6.1.2.1.16.2.2.1.8

Read-Only

Counter32

The number of good packets received during this sampling interval that were directed to a multicast address.

RFC1757-RMON.mib

etherHistoryCRCAlignErrors

1.3.6.1.2.1.16.2.2.1.9

Read-Only

Counter32

The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

RFC1757-RMON.mib

etherHistoryUndersizePkts

1.3.6.1.2.1.16.2.2.1.10

Read-Only

Counter32

The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.

RFC1757-RMON.mib

etherHistoryOversizePkts

1.3.6.1.2.1.16.2.2.1.11

Read-Only

Counter32

The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.

RFC1757-RMON.mib

etherHistoryJabbers

1.3.6.1.2.1.16.2.2.1.13

Read-Only

Counter32

The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

RFC1757-RMON.mib

etherHistoryCollisions

1.3.6.1.2.1.16.2.2.1.14

Read-Only

Counter32

The best estimate of the total number of collisions on this Ethernet segment during this sampling interval.

RFC1757-RMON.mib

etherHistoryUtilization

1.3.6.1.2.1.16.2.2.1.15

Read-Only

Counter32

The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.

RFC1757-RMON.mib

alarm

1.3.6.1.2.1.16.3

The alarm group.

RFC1757-RMON.mib

alarmTable

1.3.6.1.2.1.16.3.1

Not-Accessible

Sequence of AlarmEntry

A list of alarm entries.

RFC1757-RMON.mib

alarmEntry

1.3.6.1.2.1.16.3.1.1

Not-Accessible

AlarmEntry

A list of parameters that set up a periodic checking for alarm conditions.

RFC1757-RMON.mib

alarmIndex

1.3.6.1.2.1.16.3.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the alarm table.

RFC1757-RMON.mib

alarmInterval

1.3.6.1.2.1.16.3.1.1.2

Read-Create

Integer32

The interval in seconds over which the data is sampled and compared with the rising and falling thresholds.

RFC1757-RMON.mib

alarmVariable

1.3.6.1.2.1.16.3.1.1.3

Read-Create

Object Identifier

The object identifier of the particular variable to be sampled.

RFC1757-RMON.mib

alarmSampleType

1.3.6.1.2.1.16.3.1.1.4

Read-Create

Integer

The method of sampling the selected variable and calculating the value to be compared against the thresholds.

RFC1757-RMON.mib

alarmValue

1.3.6.1.2.1.16.3.1.1.5

Read-Only

Integer32

The value of the statistic during the last sampling period.

RFC1757-RMON.mib

alarmStartupAlarm

1.3.6.1.2.1.16.3.1.1.6

Read-Create

Integer

The alarm that may be sent when this entry is first set to valid.

RFC1757-RMON.mib

alarmRisingThreshold

1.3.6.1.2.1.16.3.1.1.7

Read-Create

Integer32

A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated.

RFC1757-RMON.mib

alarmFallingThreshold

1.3.6.1.2.1.16.3.1.1.8

Read-Create

Integer32

A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated.

RFC1757-RMON.mib

alarmRisingEventIndex

1.3.6.1.2.1.16.3.1.1.9

Read-Create

Integer32

The index of the eventEntry that is used when a rising threshold is crossed.

RFC1757-RMON.mib

alarmFallingEventIndex

1.3.6.1.2.1.16.3.1.1.10

Read-Create

Integer32

The index of the eventEntry that is used when a falling threshold is crossed.

RFC1757-RMON.mib

alarmOwner

1.3.6.1.2.1.16.3.1.1.11

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

RFC1757-RMON.mib

alarmStatus

1.3.6.1.2.1.16.3.1.1.12

Read-Create

Integer

The status of this alarm entry.

RFC1757-RMON.mib

event

1.3.6.1.2.1.16.9

The event group.

RFC1757-RMON.mib

eventTable

1.3.6.1.2.1.16.9.1

Not-Accessible

Sequence of EventEntry

A list of events to be generated.

RFC1757-RMON.mib

eventEntry

1.3.6.1.2.1.16.9.1.1

Not-Accessible

EventEntry

A set of parameters that describe an event to be generated when certain conditions are met.

RFC1757-RMON.mib

eventIndex

1.3.6.1.2.1.16.9.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the event table.

RFC1757-RMON.mib

eventDescription

1.3.6.1.2.1.16.9.1.1.2

Read-Create

DisplayString

A comment describing this event entry.

RFC1757-RMON.mib

eventType

1.3.6.1.2.1.16.9.1.1.3

Read-Create

Integer

The type of notification that the probe will make about this event.

RFC1757-RMON.mib

eventCommunity

1.3.6.1.2.1.16.9.1.1.4

Read-Create

Octet String

If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.

RFC1757-RMON.mib

eventLastTimeSent

1.3.6.1.2.1.16.9.1.1.5

Read-Only

TimeTicks

The value of sysUpTime at the time this event entry last generated an event.

RFC1757-RMON.mib

eventOwner

1.3.6.1.2.1.16.9.1.1.6

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

RFC1757-RMON.mib

eventStatus

1.3.6.1.2.1.16.9.1.1.7

Read-Create

Integer

The status of this event entry.

RFC1757-RMON.mib

logTable

1.3.6.1.2.1.16.9.2

Not-Accessible

Sequence of LogEntry

A list of events that have been logged.

RFC1757-RMON.mib

logEntry

1.3.6.1.2.1.16.9.2.1

Not-Accessible

LogEntry

A set of data describing an event that has been logged.

RFC1757-RMON.mib

logEventIndex

1.3.6.1.2.1.16.9.2.1.1

Read-Only

Integer32

The event entry that generated this log entry.

RFC1757-RMON.mib

logIndex

1.3.6.1.2.1.16.9.2.1.2

Read-Only

Integer32

An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries.

RFC1757-RMON.mib

logTime

1.3.6.1.2.1.16.9.2.1.3

Read-Only

TimeTicks

The value of sysUpTime when this log entry was created.

RFC1757-RMON.mib

logDescription

1.3.6.1.2.1.16.9.2.1.4

Read-Only

DisplayString

An implementation dependent description of the event that activated this log entry.

RFC1757-RMON.mib

dot1dBridge

1.3.6.1.2.1.17

Bridge objects.

dot1dBase

1.3.6.1.2.1.17.1

"dot1dBase" group.

dot1dBaseBridgeAddress

1.3.6.1.2.1.17.1.1

Read-Only

MacAddress

The MAC address used by this bridge when it must be referred to in a unique fashion.

RFC1493-Bridge.mib

dot1dBaseNumPorts

1.3.6.1.2.1.17.1.2

Read-Only

Integer

The number of ports controlled by this bridging entity.

RFC1493-Bridge.mib

dot1dBaseType

1.3.6.1.2.1.17.1.3

Read-Only

Integer

Indicates what type of bridging this bridge can perform.

RFC1493-Bridge.mib

dot1dBasePortTable

1.3.6.1.2.1.17.1.4

Not-Accessible

Sequence of Dot1dBasePortEntry

A table that contains generic information about every port that is associated with this bridge.

RFC1493-Bridge.mib

dot1dBasePortEntry

1.3.6.1.2.1.17.1.4.1

Not-Accessible

Dot1dBasePortEntry

A list of information for each port of the bridge.

RFC1493-Bridge.mib

dot1dBasePort

1.3.6.1.2.1.17.1.4.1.1

Read-Only

Integer

The port number of the port for which this entry contains bridge management information.

RFC1493-Bridge.mib

dot1dBasePortIfIndex

1.3.6.1.2.1.17.1.4.1.2

Read-Only

Integer

The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.

RFC1493-Bridge.mib

dot1dBasePortCircuit

1.3.6.1.2.1.17.1.4.1.3

Read-Only

Object Identifier

For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port.

RFC1493-Bridge.mib

dot1dBasePortDelayExceededDiscards

1.3.6.1.2.1.17.1.4.1.4

Read-Only

Counter

The number of frames discarded by this port due to excessive transit delay through the bridge.

RFC1493-Bridge.mib

dot1dBasePortMtuExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

Read-Only

Counter

The number of frames discarded by this port due to an excessive size.

RFC1493-Bridge.mib

dot1dStp

1.3.6.1.2.1.17.2

"dot1dStp" group.

RFC1493-Bridge.mib

dot1dStpProtocolSpecification

1.3.6.1.2.1.17.2.1

Read-Only

Integer

An indication of what version of the Spanning Tree Protocol is being run.

RFC1493-Bridge.mib

dot1dStpPriority

1.3.6.1.2.1.17.2.2

Read-Write

Integer

The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.

RFC1493-Bridge.mib

dot1dStpTimeSinceTopologyChange

1.3.6.1.2.1.17.2.3

Read-Only

TimeTicks

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

RFC1493-Bridge.mib

dot1dStpTopChanges

1.3.6.1.2.1.17.2.4

Read-Only

Counter

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

RFC1493-Bridge.mib

dot1dStpDesignatedRoot

1.3.6.1.2.1.17.2.5

Read-Only

BridgeId

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.

RFC1493-Bridge.mib

dot1dStpRootCost

1.3.6.1.2.1.17.2.6

Read-Only

Integer

The cost of the path to the root as seen from this bridge.

RFC1493-Bridge.mib

dot1dStpRootPort

1.3.6.1.2.1.17.2.7

Read-Only

Integer

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

RFC1493-Bridge.mib

dot1dStpMaxAge

1.3.6.1.2.1.17.2.8

Read-Only

Timeout

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second.

RFC1493-Bridge.mib

dot1dStpHelloTime

1.3.6.1.2.1.17.2.9

Read-Only

Timeout

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second.

RFC1493-Bridge.mib

dot1dStpHoldTime

1.3.6.1.2.1.17.2.10

Read-Only

Integer

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

RFC1493-Bridge.mib

dot1dStpForwardDelay

1.3.6.1.2.1.17.2.11

Read-Only

Timeout

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state.

RFC1493-Bridge.mib

dot1dStpBridgeMaxAge

1.3.6.1.2.1.17.2.12

Read-Write

Timeout

The value that all bridges use for MaxAge when this bridge is acting as the root.

RFC1493-Bridge.mib

dot1dStpBridgeHelloTime

1.3.6.1.2.1.17.2.13

Read-Write

Timeout

The value that all bridges use for HelloTime when this bridge is acting as the root.

RFC1493-Bridge.mib

dot1dStpBridgeForwardDelay

1.3.6.1.2.1.17.2.14

Read-Write

Timeout

The value that all bridges use for ForwardDelay when this bridge is acting as the root.

RFC1493-Bridge.mib

dot1dStpPortTable

1.3.6.1.2.1.17.2.15

Not-Accessible

Sequence of Dot1dStpPortEntry

A table that contains port-specific information for the Spanning Tree Protocol.

RFC1493-Bridge.mib

dot1dStpPortEntry

1.3.6.1.2.1.17.2.15.1

Not-Accessible

Dot1dStpPortEntry

A list of information maintained by every port about the Spanning Tree Protocol state for that port.

RFC1493-Bridge.mib

dot1dStpPort

1.3.6.1.2.1.17.2.15.1.1

Read-Only

Integer

The port number of the port for which this entry contains Spanning Tree Protocol management information.

RFC1493-Bridge.mib

dot1dStpPortPriority

1.3.6.1.2.1.17.2.15.1.2

Read-Write

Integer

The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.

RFC1493-Bridge.mib

dot1dStpPortState

1.3.6.1.2.1.17.2.15.1.3

Read-Only

Integer

The port's current state as defined by application of the Spanning Tree Protocol.

RFC1493-Bridge.mib

dot1dStpPortEnable

1.3.6.1.2.1.17.2.15.1.4

Read-Write

Integer

The enabled/disabled status of the port.

RFC1493-Bridge.mib

dot1dStpPortPathCost

1.3.6.1.2.1.17.2.15.1.5

Read-Write

Integer

The contribution of this port to the path cost of paths towards the spanning tree root which include this port.

RFC1493-Bridge.mib

dot1dStpPortDesignatedRoot

1.3.6.1.2.1.17.2.15.1.6

Read-Only

BridgeId

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

RFC1493-Bridge.mib

dot1dStpPortDesignatedCost

1.3.6.1.2.1.17.2.15.1.7

Read-Only

Integer

The path cost of the Designated Port of the segment connected to this port.

RFC1493-Bridge.mib

dot1dStpPortDesignatedBridge

1.3.6.1.2.1.17.2.15.1.8

Read-Only

BridgeId

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

RFC1493-Bridge.mib

dot1dStpPortDesignatedPort

1.3.6.1.2.1.17.2.15.1.9

Read-Only

Octet String

The Port Identifier of the port on the Designated Bridge for this port's segment.

RFC1493-Bridge.mib

dot1dStpPortForwardTransitions

1.3.6.1.2.1.17.2.15.1.10

Read-Only

Counter

The number of times this port has transitioned from the Learning state to the Forwarding state.

RFC1493-Bridge.mib

dot1dTp

1.3.6.1.2.1.17.4

"dot1dTp" group.

RFC1493-Bridge.mib

dot1dTpAgingTime

1.3.6.1.2.1.17.4.2

Read-Write

Integer

The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.

RFC1493-Bridge.mib

dot1dTpFdbTable

1.3.6.1.2.1.17.4.3

Not-Accessible

Sequence of Dot1dTpFdbEntry

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information.

RFC1493-Bridge.mib

dot1dTpFdbEntry

1.3.6.1.2.1.17.4.3.1

Not-Accessible

Dot1dTpFdbEntry

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

RFC1493-Bridge.mib

dot1dTpFdbAddress

1.3.6.1.2.1.17.4.3.1.1

Read-Only

MacAddress

A unicast MAC address for which the bridge has forwarding and/or filtering information.

RFC1493-Bridge.mib

dot1dTpFdbPort

1.3.6.1.2.1.17.4.3.1.2

Read-Only

Integer

Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.

RFC1493-Bridge.mib

dot1dTpFdbStatus

1.3.6.1.2.1.17.4.3.1.3

Read-Only

Integer

The status of this entry.

RFC1493-Bridge.mib

dot1dTpPortTable

1.3.6.1.2.1.17.4.4

Not-Accessible

Sequence of Dot1dTpPortEntry

A table that contains information about every port that is associated with this transparent bridge.

RFC1493-Bridge.mib

dot1dTpPortEntry

1.3.6.1.2.1.17.4.4.1

Not-Accessible

Dot1dTpPortEntry

A list of information for each port of a transparent bridge.

RFC1493-Bridge.mib

dot1dTpPort

1.3.6.1.2.1.17.4.4.1.1

Read-Only

Integer

The port number of the port for which this entry contains Transparent bridging management information.

RFC1493-Bridge.mib

dot1dTpPortMaxInfo

1.3.6.1.2.1.17.4.4.1.2

Read-Only

Integer

The maximum size of the INFO (non-MAC) field that this port will receive or transmit.

RFC1493-Bridge.mib

dot1dTpPortInFrames

1.3.6.1.2.1.17.4.4.1.3

Read-Only

Counter

The number of frames that have been received by this port from its segment.

RFC1493-Bridge.mib

dot1dTpPortOutFrames

1.3.6.1.2.1.17.4.4.1.4

Read-Only

Counter

The number of frames that have been transmitted by this port to its segment.

RFC1493-Bridge.mib

dot1dTpPortInDiscards

1.3.6.1.2.1.17.4.4.1.5

Read-Only

Counter

Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.

RFC1493-Bridge.mib

dot1dStatic

1.3.6.1.2.1.17.5

"dot1dStatic" group.

RFC1493-Bridge.mib

dot1dStaticTable

1.3.6.1.2.1.17.5.1

Not-Accessible

Sequence of Dot1dStaticEntry

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded.

RFC1493-Bridge.mib

dot1dStaticEntry

1.3.6.1.2.1.17.5.1.1

Not-Accessible

Dot1dStaticEntry

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

RFC1493-Bridge.mib

dot1dStaticAddress

1.3.6.1.2.1.17.5.1.1.1

Read-Write

MacAddress

The destination MAC address in a frame to which this entry's filtering information applies.

RFC1493-Bridge.mib

dot1dStaticReceivePort

1.3.6.1.2.1.17.5.1.1.2

Read-Write

Integer

Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply.

RFC1493-Bridge.mib

dot1dStaticAllowedToGoTo

1.3.6.1.2.1.17.5.1.1.3

Read-Write

Octet String

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded.

RFC1493-Bridge.mib

dot1dStaticStatus

1.3.6.1.2.1.17.5.1.1.4

Read-Write

Integer

This object indicates the status of this entry.

RFC1493-Bridge.mib

pBridgeMIB

1.3.6.1.2.1.17.6

The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998.

RFC2674-pBridge.mib

pBridgeMIBObjects

1.3.6.1.2.1.17.6.1

RFC2674-pBridge.mib

dot1dExtBase

1.3.6.1.2.1.17.6.1.1

RFC2674-pBridge.mib

dot1dDeviceCapabilities

1.3.6.1.2.1.17.6.1.1.1

Read-Only

BITS

Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB.

RFC2674-pBridge.mib

dot1dTrafficClassesEnabled

1.3.6.1.2.1.17.6.1.1.2

Read-Write

TruthValue

The value true(1) indicates that Traffic Classes are enabled on this bridge.

RFC2674-pBridge.mib

dot1dGmrpStatus

1.3.6.1.2.1.17.6.1.1.3

Read-Write

EnabledStatus

The administrative status requested by management for GMRP.

RFC2674-pBridge.mib

dot1dPriority

1.3.6.1.2.1.17.6.1.2

RFC2674-pBridge.mib

dot1dPortPriorityTable

1.3.6.1.2.1.17.6.1.2.1

Not-Accessible

Sequence of Dot1dPortPriorityEntry

A table that contains information about every port that is associated with this transparent bridge.

RFC2674-pBridge.mib

dot1dPortPriorityEntry

1.3.6.1.2.1.17.6.1.2.1.1

Not-Accessible

Dot1dPortPriorityEntry

A list of Default User Priorities for each port of a transparent bridge.

RFC2674-pBridge.mib

dot1dPortDefaultUserPriority

1.3.6.1.2.1.17.6.1.2.1.1.1

Read-Write

Integer

The default ingress User Priority for this port.

RFC2674-pBridge.mib

dot1dPortNumTrafficClasses

1.3.6.1.2.1.17.6.1.2.1.1.2

Read-Write

Integer

The number of egress traffic classes supported on this port.

RFC2674-pBridge.mib

dot1dTrafficClassTable

1.3.6.1.2.1.17.6.1.2.3

Not-Accessible

Sequence of Dot1dTrafficClassEntry

A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge.

RFC2674-pBridge.mib

dot1dTrafficClassEntry

1.3.6.1.2.1.17.6.1.2.3.1

Not-Accessible

Dot1dTrafficClassEntry

User Priority to Traffic Class mapping.

RFC2674-pBridge.mib

dot1dTrafficClass

1.3.6.1.2.1.17.6.1.2.3.1.2

Read-Write

Integer

The Traffic Class the received frame is mapped to.

RFC2674-pBridge.mib

dot1dGarp

1.3.6.1.2.1.17.6.1.3

RFC2674-pBridge.mib

dot1dPortGarpTable

1.3.6.1.2.1.17.6.1.3.1

Not-Accessible

Sequence of Dot1dPortGarpEntry

A table of GARP control information about every bridge port.

RFC2674-pBridge.mib

dot1dPortGarpEntry

1.3.6.1.2.1.17.6.1.3.1.1

Not-Accessible

Dot1dPortGarpEntry

GARP control information for a bridge port.

RFC2674-pBridge.mib

dot1dPortGarpJoinTime

1.3.6.1.2.1.17.6.1.3.1.1.1

Read-Write

TimeInterval

The GARP Join time, in centiseconds.

RFC2674-pBridge.mib

dot1dPortGarpLeaveTime

1.3.6.1.2.1.17.6.1.3.1.1.2

Read-Write

TimeInterval

The GARP Leave time, in centiseconds.

RFC2674-pBridge.mib

dot1dPortGarpLeaveAllTime

1.3.6.1.2.1.17.6.1.3.1.1.3

Read-Write

TimeInterval

The GARP LeaveAll time, in centiseconds.

RFC2674-pBridge.mib

qBridgeMIB

1.3.6.1.2.1.17.7

The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-1998.

RFC2674-qBridge.mib

qBridgeMIBObjects

1.3.6.1.2.1.17.7.1

RFC2674-qBridge.mib

dot1qBase

1.3.6.1.2.1.17.7.1.1

RFC2674-qBridge.mib

dot1qVlanVersionNumber

1.3.6.1.2.1.17.7.1.1.1

Read-Only

Integer

The version number of IEEE 802.1Q that this device supports.

RFC2674-qBridge.mib

dot1qMaxVlanId

1.3.6.1.2.1.17.7.1.1.2

Read-Only

Integer

The maximum IEEE 802.1Q VLAN ID that this device supports.

RFC2674-qBridge.mib

dot1qMaxSupportedVlans

1.3.6.1.2.1.17.7.1.1.3

Read-Only

Unsigned32

The maximum number of IEEE 802.1Q VLANs that this device supports.

RFC2674-qBridge.mib

dot1qNumVlans

1.3.6.1.2.1.17.7.1.1.4

Read-Only

Unsigned32

The current number of IEEE 802.1Q VLANs that are configured in this device.

RFC2674-qBridge.mib

dot1qGvrpStatus

1.3.6.1.2.1.17.7.1.1.5

Read-Write

EnabledStatus

The administrative status requested by management for GVRP.

RFC2674-qBridge.mib

dot1qTp

1.3.6.1.2.1.17.7.1.2

RFC2674-qBridge.mib

dot1qFdbTable

1.3.6.1.2.1.17.7.1.2.1

Not-Accessible

Sequence of Dot1qFdbEntry

A table that contains configuration and control information for each Filtering Database currently operating on this device.

RFC2674-qBridge.mib

dot1qFdbEntry

1.3.6.1.2.1.17.7.1.2.1.1

Not-Accessible

Dot1qFdbEntry

Information about a specific Filtering Database.

RFC2674-qBridge.mib

dot1qFdbDynamicCount

1.3.6.1.2.1.17.7.1.2.1.1.2

Read-Only

Counter32

The current number of dynamic entries in this Filtering Database.

RFC2674-qBridge.mib

dot1qTpFdbTable

1.3.6.1.2.1.17.7.1.2.2

Not-Accessible

Sequence of Dot1qTpFdbEntry

A table that contains information about unicast entries for which the device has forwarding and/or filtering information.

RFC2674-qBridge.mib

dot1qTpFdbEntry

1.3.6.1.2.1.17.7.1.2.2.1

Not-Accessible

Dot1qTpFdbEntry

Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.

RFC2674-qBridge.mib

dot1qTpFdbPort

1.3.6.1.2.1.17.7.1.2.2.1.2

Read-Only

Integer

Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen.

RFC2674-qBridge.mib

dot1qTpFdbStatus

1.3.6.1.2.1.17.7.1.2.2.1.3

Read-Only

Integer

The status of this entry.

RFC2674-qBridge.mib

ifMIB

1.3.6.1.2.1.31

The MIB module to describe generic objects for network interface sub-layers.

ifMIBObjects

1.3.6.1.2.1.31.1

RFC2863.mib

ifXTable

1.3.6.1.2.1.31.1.1

Not-Accessible

Sequence of IfXEntry

A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.

RFC2863.mib

ifXEntry

1.3.6.1.2.1.31.1.1.1

Not-Accessible

IfXEntry

An entry containing additional management information applicable to a particular interface.

RFC2863.mib

ifName

1.3.6.1.2.1.31.1.1.1.1

Read-Only

DisplayString

The textual name of the interface.

RFC2863.mib

ifInMulticastPkts

1.3.6.1.2.1.31.1.1.1.2

Read-Only

Counter32

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.

RFC2863.mib

ifInBroadcastPkts

1.3.6.1.2.1.31.1.1.1.3

Read-Only

Counter32

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.

RFC2863.mib

ifOutMulticastPkts

1.3.6.1.2.1.31.1.1.1.4

Read-Only

Counter32

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

RFC2863.mib

ifOutBroadcastPkts

1.3.6.1.2.1.31.1.1.1.5

Read-Only

Counter32

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.

RFC2863.mib

ifHCInOctets

1.3.6.1.2.1.31.1.1.1.6

Read-Only

Counter64

The total number of octets received on the interface, including framing characters.

RFC2863.mib

ifHCInUcastPkts

1.3.6.1.2.1.31.1.1.1.7

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.

RFC2863.mib

ifHCInMulticastPkts

1.3.6.1.2.1.31.1.1.1.8

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.

RFC2863.mib

ifHCInBroadcastPkts

1.3.6.1.2.1.31.1.1.1.9

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.

RFC2863.mib

ifHCOutOctets

1.3.6.1.2.1.31.1.1.1.10

Read-Only

Counter64

The total number of octets transmitted out of the interface, including framing characters.

RFC2863.mib

ifHCOutUcastPkts

1.3.6.1.2.1.31.1.1.1.11

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.

RFC2863.mib

ifHCOutMulticastPkts

1.3.6.1.2.1.31.1.1.1.12

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

RFC2863.mib

ifHCOutBroadcastPkts

1.3.6.1.2.1.31.1.1.1.13

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.

RFC2863.mib

ifLinkUpDownTrapEnable

1.3.6.1.2.1.31.1.1.1.14

Read-Write

Integer

Indicates whether linkUp/linkDown traps should be generated for this interface.

RFC2863.mib

ifHighSpeed

1.3.6.1.2.1.31.1.1.1.15

Read-Only

Gauge32

An estimate of the interface’s current bandwidth in units of 1,000,000 bits per second.

RFC2863.mib

ifPromiscuousMode

1.3.6.1.2.1.31.1.1.1.16

Read-Write

TruthValue

This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station.

RFC2863.mib

ifConnectorPresent

1.3.6.1.2.1.31.1.1.1.17

Read-Only

TruthValue

This object has the value ’true(1)’ if the interface sublayer has a physical connector and the value ’false(2)’ otherwise.

RFC2863.mib

ifAlias

1.3.6.1.2.1.31.1.1.1.18

Read-Write

DisplayString

This object is an ’alias’ name for the interface as specified by a network manager, and provides a non-volatile ’handle’ for the interface.

RFC2863.mib

ifCounterDiscontinuityTime

1.3.6.1.2.1.31.1.1.1.19

Read-Only

TimeStamp

The value of sysUpTime on the most recent occasion at which any one or more of this interface’s counters suffered a discontinuity.

RFC2863.mib

radiusMIB

1.3.6.1.2.1.67

The OID assigned to RADIUS MIB work by the IANA.

radiusAuthentication

1.3.6.1.2.1.67.1

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClientMIB

1.3.6.1.2.1.67.1.2

The MIB module for entities implementing the client side of the Remote Access Dialin User Service (RADIUS) authentication protocol.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClientMIBObjects

1.3.6.1.2.1.67.1.2.1

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClient

1.3.6.1.2.1.67.1.2.1.1

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClientIdentifier

1.3.6.1.2.1.67.1.2.1.1.2

Read-Only

SnmpAdminString

The NAS-Identifier of the RADIUS authentication client.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthServerTable

1.3.6.1.2.1.67.1.2.1.1.3

Not-Accessible

Sequence of RadiusAuthServerEntry

The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthServerEntry

1.3.6.1.2.1.67.1.2.1.1.3.1

Not-Accessible

RadiusAuthServerEntry

An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthServerAddress

1.3.6.1.2.1.67.1.2.1.1.3.1.2

Read-Only

IpAddress

The IP address of the RADIUS authentication server referred to in this table entry.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClientServerPortNumber

1.3.6.1.2.1.67.1.2.1.1.3.1.3

Read-Only

Integer32

The UDP port the client is using to send requests to this server.

RFC2618-RADIUS-Auth-Client.mib

radiusAuthClientTimeouts

1.3.6.1.2.1.67.1.2.1.1.3.1.13

Read-Only

Counter32

The number of authentication timeouts to this server.

RFC2618-RADIUS-Auth-Client.mib

radiusAccounting

1.3.6.1.2.1.67.2

RFC2620-RADIUS-Acc-Client.mib

radiusAccClientMIB

1.3.6.1.2.1.67.2.2

The MIB module for entities implementing the client side of the Remote Access Dialin User Service (RADIUS) accounting protocol.

RFC2620-RADIUS-Acc-Client.mib

radiusAccClientMIBObjects

1.3.6.1.2.1.67.2.2.1

RFC2620-RADIUS-Acc-Client.mib

radiusAccClient

1.3.6.1.2.1.67.2.2.1.1

RFC2620-RADIUS-Acc-Client.mib

radiusAccClientIdentifier

1.3.6.1.2.1.67.2.2.1.1.2

Read-Only

SnmpAdminString

The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II.

RFC2620-RADIUS-Acc-Client.mib

radiusAccServerTable

1.3.6.1.2.1.67.2.2.1.1.3

Not-Accessible

Sequence of RadiusAccServerEntry

The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.

RFC2620-RADIUS-Acc-Client.mib

radiusAccServerEntry

1.3.6.1.2.1.67.2.2.1.1.3.1

Not-Accessible

RadiusAccServerEntry

An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.

RFC2620-RADIUS-Acc-Client.mib

radiusAccServerAddress

1.3.6.1.2.1.67.2.2.1.1.3.1.2

Read-Only

IpAddress

The IP address of the RADIUS accounting server referred to in this table entry.

RFC2620-RADIUS-Acc-Client.mib

radiusAccClientServerPortNumber

1.3.6.1.2.1.67.2.2.1.1.3.1.3

Read-Only

Integer32

The UDP port the client is using to send requests to this server.

RFC2620-RADIUS-Acc-Client.mib

radiusAccClientTimeouts

1.3.6.1.2.1.67.2.2.1.1.3.1.11

Read-Only

Counter32

The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up.

RFC2620-RADIUS-Acc-Client.mib

pingMIB

1.3.6.1.2.1.80

The Ping MIB (DISMAN-PING-MIB) provides the capability of controlling the use of the ping function at a remote host.

RFC2925-Disman-Ping.mib

pingObjects

1.3.6.1.2.1.80.1

RFC2925-Disman-Ping.mib

pingMaxConcurrentRequests

1.3.6.1.2.1.80.1.1

Read-Write

Unsigned32

The maximum number of concurrent active ping requests that are allowed within an agent implementation.

RFC2925-Disman-Ping.mib

pingCtlTable

1.3.6.1.2.1.80.1.2

Not-Accessible

Sequence of PingCtlEntry

Defines the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host.

RFC2925-Disman-Ping.mib

pingCtlEntry

1.3.6.1.2.1.80.1.2.1

Not-Accessible

PingCtlEntry

Defines an entry in the pingCtlTable.

RFC2925-Disman-Ping.mib

pingCtlTargetAddressType

1.3.6.1.2.1.80.1.2.1.3

Read-Create

InetAddressType

Specifies the type of host address to be used at a remote host for performing a ping operation.

RFC2925-Disman-Ping.mib

pingCtlTargetAddress

1.3.6.1.2.1.80.1.2.1.4

Read-Create

InetAddress

Specifies the host address to be used at a remote host for performing a ping operation.

RFC2925-Disman-Ping.mib

pingCtlDataSize

1.3.6.1.2.1.80.1.2.1.5

Read-Create

Unsigned32

Specifies the size of the data portion to be transmitted in a ping operation in octets.

RFC2925-Disman-Ping.mib

pingCtlTimeOut

1.3.6.1.2.1.80.1.2.1.6

Read-Create

Unsigned32

Specifies the time-out value, in seconds, for a remote ping operation.

RFC2925-Disman-Ping.mib

pingCtlProbeCount

1.3.6.1.2.1.80.1.2.1.7

Read-Create

Unsigned32

Specifies the number of times to perform a ping operation at a remote host.

RFC2925-Disman-Ping.mib

pingCtlAdminStatus

1.3.6.1.2.1.80.1.2.1.8

Read-Create

Integer

Reflects the desired state that a pingCtlEntry should be in:
enabled(1) - Attempt to activate the test as defined by this pingCtlEntry.
disabled(2) - Deactivate the test as defined by this pingCtlEntry.

RFC2925-Disman-Ping.mib

pingCtlDataFill

1.3.6.1.2.1.80.1.2.1.9

Read-Create

Octet String

The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet.

RFC2925-Disman-Ping.mib

pingCtlFrequency

1.3.6.1.2.1.80.1.2.1.10

Read-Create

Unsigned32

The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row.

RFC2925-Disman-Ping.mib

pingCtlMaxRows

1.3.6.1.2.1.80.1.2.1.11

Read-Create

Unsigned32

The maximum number of entries allowed in the pingProbeHistoryTable.

RFC2925-Disman-Ping.mib

pingCtlStorageType

1.3.6.1.2.1.80.1.2.1.12

Read-Only

StorageType

The storage type for this conceptual row.

RFC2925-Disman-Ping.mib

pingCtlTrapGeneration

1.3.6.1.2.1.80.1.2.1.13

Read-Create

BITS

The value of this object determines when and if to generate a notification for this entry.

RFC2925-Disman-Ping.mib

pingCtlTrapProbeFailureFilter

1.3.6.1.2.1.80.1.2.1.14

Read-Create

Unsigned32

The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION.

RFC2925-Disman-Ping.mib

pingCtlTrapTestFailureFilter

1.3.6.1.2.1.80.1.2.1.15

Read-Create

Unsigned32

The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION.

RFC2925-Disman-Ping.mib

pingCtlType

1.3.6.1.2.1.80.1.2.1.16

Read-Create

Object Identifier

The value of this object is used to either report or select the implementation method to be used for calculating a ping response time.

RFC2925-Disman-Ping.mib

pingCtlDescr

1.3.6.1.2.1.80.1.2.1.17

Read-Create

SnmpAdminString

The purpose of this object is to provide a descriptive name of the remote ping test.

RFC2925-Disman-Ping.mib

pingCtlSourceAddressType

1.3.6.1.2.1.80.1.2.1.18

Read-Create

InetAddressType

Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when performing a ping operation.

RFC2925-Disman-Ping.mib

pingCtlSourceAddress

1.3.6.1.2.1.80.1.2.1.19

Read-Create

InetAddress

Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets.

RFC2925-Disman-Ping.mib

pingCtlIfIndex

1.3.6.1.2.1.80.1.2.1.20

Read-Create

InterfaceIndexOrZero

Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface.

RFC2925-Disman-Ping.mib

pingCtlByPassRouteTable

1.3.6.1.2.1.80.1.2.1.21

Read-Create

TruthValue

The purpose of this object is to optionally enable bypassing the route table.

RFC2925-Disman-Ping.mib

pingCtlDSField

1.3.6.1.2.1.80.1.2.1.22

Read-Create

Unsigned32

Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe.

RFC2925-Disman-Ping.mib

pingCtlRowStatus

1.3.6.1.2.1.80.1.2.1.23

Read-Create

RowStatus

This object allows entries to be created and deleted in the pingCtlTable.

RFC2925-Disman-Ping.mib

pingResultsTable

1.3.6.1.2.1.80.1.3

Not-Accessible

Sequence of PingResultsEntry

Defines the Ping Results Table for providing the capability of performing ping operations at a remote host.

RFC2925-Disman-Ping.mib

pingResultsEntry

1.3.6.1.2.1.80.1.3.1

Not-Accessible

PingResultsEntry

Defines an entry in the pingResultsTable.

RFC2925-Disman-Ping.mib

pingResultsOperStatus

1.3.6.1.2.1.80.1.3.1.1

Read-Only

Integer

Reflects the operational state of a pingCtlEntry.

RFC2925-Disman-Ping.mib

pingResultsIpTargetAddressType

1.3.6.1.2.1.80.1.3.1.2

Read-Only

InetAddressType

This objects indicates the type of address stored in the corresponding pingResultsIpTargetAddress object.

RFC2925-Disman-Ping.mib

pingResultsIpTargetAddress

1.3.6.1.2.1.80.1.3.1.3

Read-Only

InetAddress

This objects reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name.

RFC2925-Disman-Ping.mib

pingResultsMinRtt

1.3.6.1.2.1.80.1.3.1.4

Read-Only

Unsigned32

The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.

RFC2925-Disman-Ping.mib

pingResultsMaxRtt

1.3.6.1.2.1.80.1.3.1.5

Read-Only

Unsigned32

The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.

RFC2925-Disman-Ping.mib

pingResultsAverageRtt

1.3.6.1.2.1.80.1.3.1.6

Read-Only

Unsigned32

The current average ping round-trip-time (RTT).

RFC2925-Disman-Ping.mib

pingResultsProbeResponses

1.3.6.1.2.1.80.1.3.1.7

Read-Only

Unsigned32

Number of responses received for the corresponding pingCtlEntry and pingResultsEntry.

RFC2925-Disman-Ping.mib

pingResultsSentProbes

1.3.6.1.2.1.80.1.3.1.8

Read-Only

Unsigned32

The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry.

RFC2925-Disman-Ping.mib

pingResultsRttSumOfSquares

1.3.6.1.2.1.80.1.3.1.9

Read-Only

Unsigned32

This object contains the sum of the squares for all ping responses received.

RFC2925-Disman-Ping.mib

pingResultsLastGoodProbe

1.3.6.1.2.1.80.1.3.1.10

Read-Only

DateAndTime

Date and time when the last response was received for a probe.

RFC2925-Disman-Ping.mib

pingProbeHistoryTable

1.3.6.1.2.1.80.1.4

Not-Accessible

Sequence of PingProbeHistoryEntry

Defines a table for storing the results of a ping operation.

RFC2925-Disman-Ping.mib

pingProbeHistoryEntry

1.3.6.1.2.1.80.1.4.1

Not-Accessible

PingProbeHistoryEntry

Defines an entry in the pingProbeHistoryTable.

RFC2925-Disman-Ping.mib

pingProbeHistoryIndex

1.3.6.1.2.1.80.1.4.1.1

Not-Accessible

Unsigned32

An entry in this table is created when the result of a ping probe is determined.

RFC2925-Disman-Ping.mib

pingProbeHistoryResponse

1.3.6.1.2.1.80.1.4.1.2

Read-Only

Unsigned32

The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out.

RFC2925-Disman-Ping.mib

pingProbeHistoryStatus

1.3.6.1.2.1.80.1.4.1.3

Read-Only

OperationResponseStatus

The result of a particular probe done by a remote host.

RFC2925-Disman-Ping.mib

pingProbeHistoryLastRC

1.3.6.1.2.1.80.1.4.1.4

Read-Only

Integer32

The last implementation method specific reply code received.

RFC2925-Disman-Ping.mib

pingProbeHistoryTime

1.3.6.1.2.1.80.1.4.1.5

Read-Only

DateAndTime

Timestamp for when this probe result was determined.

RFC2925-Disman-Ping.mib

traceRouteMIB

1.3.6.1.2.1.81

The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides access to the traceroute capability at a remote host.

RFC2925-Disman-Traceroute.mib

traceRouteObjects

1.3.6.1.2.1.81.1

Trace route objects.

RFC2925-Disman-Traceroute.mib

traceRouteMaxConcurrentRequests

1.3.6.1.2.1.81.1.1

Read-Write

Unsigned32

The maximum number of concurrent active traceroute requests that are allowed within an agent implementation.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTable

1.3.6.1.2.1.81.1.2

Not-Accessible

Sequence of TraceRouteCtlEntry

Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host.

RFC2925-Disman-Traceroute.mib

traceRouteCtlEntry

1.3.6.1.2.1.81.1.2.1

Not-Accessible

TraceRouteCtlEntry

Defines an entry in the traceRouteCtlTable.

RFC2925-Disman-Traceroute.mib

traceRouteCtlOwnerIndex

1.3.6.1.2.1.81.1.2.1.1

Not-Accessible

SnmpAdminString

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTestName

1.3.6.1.2.1.81.1.2.1.2

Not-Accessible

SnmpAdminString

The name of a traceroute test.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTargetAddressType

1.3.6.1.2.1.81.1.2.1.3

Read-Create

InetAddressType

Specifies the type of host address to be used on the traceroute request at the remote host.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTargetAddress

1.3.6.1.2.1.81.1.2.1.4

Read-Create

InetAddress

Specifies the host address used on the traceroute request at the remote host.

RFC2925-Disman-Traceroute.mib

traceRouteCtlByPassRouteTable

1.3.6.1.2.1.81.1.2.1.5

Read-Create

TruthValue

The purpose of this object is to optionally enable bypassing the route table.

RFC2925-Disman-Traceroute.mib

traceRouteCtlDataSize

1.3.6.1.2.1.81.1.2.1.6

Read-Create

Unsigned32

Specifies the size of the data portion of a traceroute request in octets.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTimeOut

1.3.6.1.2.1.81.1.2.1.7

Read-Create

Unsigned32

Specifies the time-out value, in seconds, for a traceroute request.

RFC2925-Disman-Traceroute.mib

traceRouteCtlProbesPerHop

1.3.6.1.2.1.81.1.2.1.8

Read-Create

Unsigned32

Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.

RFC2925-Disman-Traceroute.mib

traceRouteCtlPort

1.3.6.1.2.1.81.1.2.1.9

Read-Create

Unsigned32

Specifies the UDP port to send the traceroute request to.

RFC2925-Disman-Traceroute.mib

traceRouteCtlMaxTtl

1.3.6.1.2.1.81.1.2.1.10

Read-Create

Unsigned32

Specifies the maximum time-to-live value.

RFC2925-Disman-Traceroute.mib

traceRouteCtlDSField

1.3.6.1.2.1.81.1.2.1.11

Read-Create

Unsigned32

Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe.

RFC2925-Disman-Traceroute.mib

traceRouteCtlSourceAddressType

1.3.6.1.2.1.81.1.2.1.12

Read-Create

InetAddressType

Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteCtlSourceAddress

1.3.6.1.2.1.81.1.2.1.13

Read-Create

InetAddress

Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets.

RFC2925-Disman-Traceroute.mib

traceRouteCtlIfIndex

1.3.6.1.2.1.81.1.2.1.14

Read-Create

InterfaceIndexOrZero

Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface.

RFC2925-Disman-Traceroute.mib

traceRouteCtlMiscOptions

1.3.6.1.2.1.81.1.2.1.15

Read-Create

SnmpAdminString

Enables an application to specify implementation dependent options.

RFC2925-Disman-Traceroute.mib

traceRouteCtlMaxFailures

1.3.6.1.2.1.81.1.2.1.16

Read-Create

Unsigned32

The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request.

RFC2925-Disman-Traceroute.mib

traceRouteCtlDontFragment

1.3.6.1.2.1.81.1.2.1.17

Read-Create

TruthValue

This object enables setting of the don't fragment flag (DF) in the IP header for a probe.

RFC2925-Disman-Traceroute.mib

traceRouteCtlInitialTtl

1.3.6.1.2.1.81.1.2.1.18

Read-Create

Unsigned32

The value of this object specifies the initial TTL value to use.

RFC2925-Disman-Traceroute.mib

traceRouteCtlFrequency

1.3.6.1.2.1.81.1.2.1.19

Read-Create

Unsigned32

The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row.

RFC2925-Disman-Traceroute.mib

traceRouteCtlStorageType

1.3.6.1.2.1.81.1.2.1.20

Read-Create

StorageType

The storage type for this conceptual row.

RFC2925-Disman-Traceroute.mib

traceRouteCtlAdminStatus

1.3.6.1.2.1.81.1.2.1.21

Read-Create

Integer

Reflects the desired state that an traceRouteCtlEntry should be in:
enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this traceRouteCtlEntry.

RFC2925-Disman-Traceroute.mib

traceRouteCtlDescr

1.3.6.1.2.1.81.1.2.1.22

Read-Create

SnmpAdminString

The purpose of this object is to provide a descriptive name of the remote traceroute test.

RFC2925-Disman-Traceroute.mib

traceRouteCtlMaxRows

1.3.6.1.2.1.81.1.2.1.23

Read-Create

Unsigned32

The maximum number of entries allowed in the traceRouteProbeHistoryTable.

RFC2925-Disman-Traceroute.mib

traceRouteCtlTrapGeneration

1.3.6.1.2.1.81.1.2.1.24

Read-Create

BITS

The value of this object determines when and if to to generate a notification for this entry.

RFC2925-Disman-Traceroute.mib

traceRouteCtlCreateHopsEntries

1.3.6.1.2.1.81.1.2.1.25

Read-Create

TruthValue

The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true(1).

RFC2925-Disman-Traceroute.mib

traceRouteCtlType

1.3.6.1.2.1.81.1.2.1.26

Read-Create

Object Identifier

The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteCtlRowStatus

1.3.6.1.2.1.81.1.2.1.27

Read-Create

RowStatus

This object allows entries to be created and deleted in the traceRouteCtlTable.

RFC2925-Disman-Traceroute.mib

traceRouteResultsTable

1.3.6.1.2.1.81.1.3

Not-Accessible

Sequence of TraceRouteResultsEntry

Defines the Remote Operations Traceroute Results Table for keeping track of the status of a traceRouteCtlEntry.

RFC2925-Disman-Traceroute.mib

traceRouteResultsEntry

1.3.6.1.2.1.81.1.3.1

Not-Accessible

TraceRouteResultsEntry

Defines an entry in the traceRouteResultsTable.

RFC2925-Disman-Traceroute.mib

traceRouteResultsOperStatus

1.3.6.1.2.1.81.1.3.1.1

Read-Only

Integer

Reflects the operational state of an traceRouteCtlEntry.

RFC2925-Disman-Traceroute.mib

traceRouteResultsCurHopCount

1.3.6.1.2.1.81.1.3.1.2

Read-Only

Gauge32

Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteResultsCurProbeCount

1.3.6.1.2.1.81.1.3.1.3

Read-Only

Gauge32

Reflects the current probe count (1..10) for a remote traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteResultsIpTgtAddrType

1.3.6.1.2.1.81.1.3.1.4

Read-Only

InetAddressType

This objects indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object.

RFC2925-Disman-Traceroute.mib

traceRouteResultsIpTgtAddr

1.3.6.1.2.1.81.1.3.1.5

Read-Only

InetAddress

This objects reports the IP address associated with a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name.

RFC2925-Disman-Traceroute.mib

traceRouteResultsTestAttempts

1.3.6.1.2.1.81.1.3.1.6

Read-Only

Unsigned32

The current number of attempts to determine a path to a target.

RFC2925-Disman-Traceroute.mib

traceRouteResultsTestSuccesses

1.3.6.1.2.1.81.1.3.1.7

Read-Only

Unsigned32

The current number of attempts to determine a path to a target that have succeeded.

RFC2925-Disman-Traceroute.mib

traceRouteResultsLastGoodPath

1.3.6.1.2.1.81.1.3.1.8

Read-Only

DateAndTime

The date and time when the last complete path was determined.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryTable

1.3.6.1.2.1.81.1.4

Not-Accessible

Sequence of TraceRouteProbeHistoryEntry

Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryEntry

1.3.6.1.2.1.81.1.4.1

Not-Accessible

TraceRouteProbeHistoryEntry

Defines a table for storing the results of a traceroute operation.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryIndex

1.3.6.1.2.1.81.1.4.1.1

Not-Accessible

Unsigned32

An entry in this table is created when the result of a traceroute probe is determined.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryHopIndex

1.3.6.1.2.1.81.1.4.1.2

Not-Accessible

Unsigned32

Indicates which hop in a traceroute path that the probe's results are for.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryProbeIndex

1.3.6.1.2.1.81.1.4.1.3

Not-Accessible

Unsigned32

Indicates the index of a probe for a particular hop in a traceroute path.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryHAddrType

1.3.6.1.2.1.81.1.4.1.4

Read-Only

InetAddressType

This objects indicates the type of address stored in the corresponding traceRouteProbeHistoryHAddr object.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryHAddr

1.3.6.1.2.1.81.1.4.1.5

Read-Only

InetAddress

The address of a hop in a traceroute path.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryResponse

1.3.6.1.2.1.81.1.4.1.6

Read-Only

Unsigned32

The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryStatus

1.3.6.1.2.1.81.1.4.1.7

Read-Only

OperationResponseStatus

The result of a traceroute operation made by a remote host for a particular probe.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryLastRC

1.3.6.1.2.1.81.1.4.1.8

Read-Only

Integer32

The last implementation method specific reply code received.

RFC2925-Disman-Traceroute.mib

traceRouteProbeHistoryTime

1.3.6.1.2.1.81.1.4.1.9

Read-Only

DateAndTime

Timestamp for when this probe results were determined.

RFC2925-Disman-Traceroute.mib

traceRouteHopsTable

1.3.6.1.2.1.81.1.5

Not-Accessible

Sequence of TraceRouteHopsEntry

Defines the Remote Operations Traceroute Hop Table for keeping track of the results of traceroute tests on a per hop basis.

RFC2925-Disman-Traceroute.mib

traceRouteHopsEntry

1.3.6.1.2.1.81.1.5.1

Not-Accessible

TraceRouteHopsEntry

Defines an entry in the traceRouteHopsTable.

RFC2925-Disman-Traceroute.mib

traceRouteHopsHopIndex

1.3.6.1.2.1.81.1.5.1.1

Not-Accessible

Unsigned32

Specifies the hop index for a traceroute hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsIpTgtAddressType

1.3.6.1.2.1.81.1.5.1.2

Read-Only

InetAddressType

This objects indicates the type of address stored in the corresponding traceRouteHopsIpTargetAddress object.

RFC2925-Disman-Traceroute.mib

traceRouteHopsIpTgtAddress

1.3.6.1.2.1.81.1.5.1.3

Read-Only

InetAddress

This object reports the IP address associated with the hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsMinRtt

1.3.6.1.2.1.81.1.5.1.4

Read-Only

Unsigned32

The minimum traceroute round-trip-time (RTT) received for this hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsMaxRtt

1.3.6.1.2.1.81.1.5.1.5

Read-Only

Unsigned32

The maximum traceroute round-trip-time (RTT) received for this hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsAverageRtt

1.3.6.1.2.1.81.1.5.1.6

Read-Only

Unsigned32

The current average traceroute round-trip-time (RTT) for this hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsRttSumOfSquares

1.3.6.1.2.1.81.1.5.1.7

Read-Only

Unsigned32

This object contains the sum of all traceroute responses received for this hop.

RFC2925-Disman-Traceroute.mib

traceRouteHopsSentProbes

1.3.6.1.2.1.81.1.5.1.8

Read-Only

Unsigned32

The value of this object reflects the number of probes sent for this hop during this traceroute test.

RFC2925-Disman-Traceroute.mib

traceRouteHopsProbeResponses

1.3.6.1.2.1.81.1.5.1.9

Read-Only

Unsigned32

Number of responses received for this hop during this traceroute test.

RFC2925-Disman-Traceroute.mib

traceRouteHopsLastGoodProbe

1.3.6.1.2.1.81.1.5.1.10

Read-Only

DateAndTime

Date and time was the last response was received for a probe for this hop during this traceroute test.

RFC2925-Disman-Traceroute.mib

lldpMIB

1.0.8802.1.1.2

lldpNotifications

1.0.8802.1.1.2.0

LLDP.mib

lldpNotificationPrefix

1.0.8802.1.1.2.0.0

LLDP.mib

lldpRemTablesChange

1.0.8802.1.1.2.0.0.1

A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls.

LLDP.mib

lldpObjects

1.0.8802.1.1.2.1

LLDP.mib

lldpConfiguration

1.0.8802.1.1.2.1.1

LLDP.mib

lldpMessageTxInterval

1.0.8802.1.1.2.1.1.1.1

Read-Write

Integer32

The interval at which LLDP frames are transmitted on behalf of this LLDP agent.

LLDP.mib

lldpMessageTxHoldMultiplier

1.0.8802.1.1.2.1.1.1.2

Read-Write

Integer32

The time-to-live value expressed as a multiple of the lldpMessageTxInterval object.

LLDP.mib

lldpReinitDelay

1.0.8802.1.1.2.1.1.1.3

Read-Write

Integer32

The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.

LLDP.mib

lldpTxDelay

1.0.8802.1.1.2.1.1.1.4

Read-Write

Integer32

The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.

LLDP.mib

lldpNotificationInterval

1.0.8802.1.1.2.1.1.1.5

Read-Write

Integer32

This object controls the transmission of LLDP notifications.

LLDP.mib

lldpPortConfigTable

1.0.8802.1.1.2.1.1.1.6

Not-Accessible

Sequence of LldpPortConfigEntry

The table that controls LLDP frame transmission on individual ports.

LLDP.mib

lldpPortConfigEntry

1.0.8802.1.1.2.1.1.1.6.1

Not-Accessible

LldpPortConfigEntry

LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.

LLDP.mib

lldpPortConfigPortNum

1.0.8802.1.1.2.1.1.1.6.1.1

Not-Accessible

LldpPortConfigEntry (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.

LLDP.mib

lldpPortConfigAdminStatus

1.0.8802.1.1.2.1.1.1.6.1.2

Read-Write

Integer

The administratively desired status of the local LLDP agent.

LLDP.mib

lldpPortConfigNotificationEnable

1.0.8802.1.1.2.1.1.1.6.1.3

Read-Write

TruthValue

The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.

LLDP.mib

lldpPortConfigTLVsTxEnable

1.0.8802.1.1.2.1.1.1.6.1.4

Read-Write

BITS

The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management.

LLDP.mib

lldpConfigManAddrTable

1.0.8802.1.1.2.1.1.7

Not-Accessible

Sequence of lldpConfigManAddrEntry

The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.

LLDP.mib

lldpConfigManAddrEntry

1.0.8802.1.1.2.1.1.7.1

Not-Accessible

lldpConfigManAddrEntry

LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted.

LLDP.mib

lldpConfigManAddrPortsTxEnable

1.0.8802.1.1.2.1.1.7.1.1

Read-Write

LldpPortList (Octet String)

A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable.

LLDP.mib

lldpStatistics

1.0.8802.1.1.2.1.2

LLDP.mib

lldpStatsRemTablesLastChangeTime

1.0.8802.1.1.2.1.2.1

Read-Only

TimeStamp

The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use this object to reduce polling of the lldpRemoteSystemsData objects.

LLDP.mib

lldpStatsRemTablesInserts

1.0.8802.1.1.2.1.2.2

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.

LLDP.mib

lldpStatsRemTablesDeletes

1.0.8802.1.1.2.1.2.3

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects.

LLDP.mib

lldpStatsRemTablesDrops

1.0.8802.1.1.2.1.2.4

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.

LLDP.mib

lldpStatsRemTablesAgeouts

1.0.8802.1.1.2.1.2.5

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired.

LLDP.mib

lldpStatsTxPortTable

1.0.8802.1.1.2.1.2.6

Not-Accessible

Sequence of lldpStatsTxPortEntry

A table containing LLDP transmission statistics for individual ports.

LLDP.mib

lldpStatsTxPortEntry

1.0.8802.1.1.2.1.2.6.1

Not-Accessible

LldpStatsTxPortEntry

LLDP frame transmission statistics for a particular port.

LLDP.mib

lldpStatsTxPortNum

1.0.8802.1.1.2.1.2.6.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

LLDP.mib

lldpStatsTxPortFramesTotal

1.0.8802.1.1.2.1.2.6.1.2

Read-Only

Counter32

The number of LLDP frames transmitted by this LLDP agent on the indicated port.

LLDP.mib

lldpStatsRxPortTable

1.0.8802.1.1.2.1.2.7

Not-Accessible

Sequence of lldpRxStatsPortEntry

A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.

LLDP.mib

lldpStatsRxPortEntry

1.0.8802.1.1.2.1.2.7.1

Not-Accessible

LldpRxStatsPortEntry

LLDP frame reception statistics for a particular port.

LLDP.mib

lldpStatsRxPortNum

1.0.8802.1.1.2.1.2.7.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

LLDP.mib

lldpStatsRxPortFramesDiscardedTotal

1.0.8802.1.1.2.1.2.7.1.2

Read-Only

Counter32

The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason.

LLDP.mib

lldpStatsRxPortFramesErrors

1.0.8802.1.1.2.1.2.7.1.3

Read-Only

Counter32

The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

LLDP.mib

lldpStatsRxPortFramesTotal

1.0.8802.1.1.2.1.2.7.1.4

Read-Only

Counter32

The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

lldpStatsRxPortTLVsDiscardedTotal

1.0.8802.1.1.2.1.2.7.1.5

Read-Only

Counter32

The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.

LLDP.mib

lldpStatsRxPortTLVsUnrecognizedTotal

1.0.8802.1.1.2.1.2.7.1.6

Read-Only

Counter32

The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port.

LLDP.mib

lldpStatsRxPortAgeoutsTotal

1.0.8802.1.1.2.1.2.7.1.7

Read-Only

Counter32

The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired.

LLDP.mib

lldpLocalSystemData

1.0.8802.1.1.2.1.3

LLDP.mib

lldpLocChassisIdSubtype

1.0.8802.1.1.2.1.3.1

Read-Only

LldpChassisIdSubtype (Integer)

The type of encoding used to identify the chassis associated with the local system.

LLDP.mib

lldpLocChassisId

1.0.8802.1.1.2.1.3.2

Read-Only

LldpChassisId (Octet String)

The string value used to identify the chassis component associated with the local system.

LLDP.mib

lldpLocSysName

1.0.8802.1.1.2.1.3.3

Read-Only

SNMPAdminstring

The string value used to identify the system name of the local system.

LLDP.mib

lldpLocSysDesc

1.0.8802.1.1.2.1.3.4

Read-Only

SNMPAdminstring

The string value used to identify the system description of the local system.

LLDP.mib

lldpLocSysCapSupported

1.0.8802.1.1.2.1.3.5

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are supported on the local system.

LLDP.mib

lldpLocSysCapEnabled

1.0.8802.1.1.2.1.3.6

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are enabled on the local system.

LLDP.mib

lldpLocPortTable

1.0.8802.1.1.2.1.3.7

Not-Accessible

Sequence of LldpLocPortEntry

This table contains one or more rows per port information associated with the local system known to this agent.

LLDP.mib

lldpLocPortEntry

1.0.8802.1.1.2.1.3.7.1

Not-Accessible

LldpLocPortEntry

Information about a particular port component. Entries may be created and deleted in this table by the agent.

LLDP.mib

lldpLocPortNum

1.0.8802.1.1.2.1.3.7.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

LLDP.mib

lldpLocPortIdSubtype

1.0.8802.1.1.2.1.3.7.1.2

Read-Only

LldpPortIdSubtype (Integer)

The type of port identifier encoding used in the associated 'lldpLocPortId' object.

LLDP.mib

lldpLocPortId

1.0.8802.1.1.2.1.3.7.1.3

Read-Only

LldpPortId (Octet String)

The string value used to identify the port component associated with a given port in the local system.

LLDP.mib

lldpLocPortDesc

1.0.8802.1.1.2.1.3.7.1.4

Read-Only

SNMPAdminstring

The string value used to identify the IEEE 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.

LLDP.mib

lldpLocManAddrTable

1.0.8802.1.1.2.1.3.8

Not-Accessible

Sequence of LldpLocManAddrEntry

This table contains management address information on the local system known to this agent.

LLDP.mib

lldpLocManAddrEntry

1.0.8802.1.1.2.1.3.8.1

Not-Accessible

LldpLocManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId.

LLDP.mib

lldpLocManAddrSubtype

1.0.8802.1.1.2.1.3.8.1.1

Not-Accessible

AddressFamilyNumbers

The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.

LLDP.mib

lldpLocManAddr

1.0.8802.1.1.2.1.3.8.1.2

Not-Accessible

LldpManAddress (Octet String)

The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.

LLDP.mib

lldpLocManAddrLen

1.0.8802.1.1.2.1.3.8.1.3

Read-Only

Integer32

The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent.

LLDP.mib

lldpLocManAddrIfSubtype

1.0.8802.1.1.2.1.3.8.1.4

Read-Only

LldpManAddrIfSubtype (Integer)

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.

LLDP.mib

lldpLocManAddrIfId

1.0.8802.1.1.2.1.3.8.1.5

Read-Only

Integer32

The integer value used to identify the interface number regarding the management address component associated with the local system.

LLDP.mib

lldpLocManAddrOID

1.0.8802.1.1.2.1.3.8.1.6

Read-Only

Object Identifier

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.

LLDP.mib

lldpRemoteSystemsData

1.0.8802.1.1.2.1.4

LLDP.mib

lldpRemTable

1.0.8802.1.1.2.1.4.1

Not-Accessible

Sequence of LldpRemEntry

LLDP.mib

lldpRemEntry

1.0.8802.1.1.2.1.4.1.1

Not-Accessible

LldpRemEntry

Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

LLDP.mib

lldpRemTimeMark

1.0.8802.1.1.2.1.4.1.1.1

Not-Accessible

TimeFilter

A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

LLDP.mib

lldpRemLocalPortNum

1.0.8802.1.1.2.1.4.1.1.2

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.

LLDP.mib

lldpRemIndex

1.0.8802.1.1.2.1.4.1.1.3

Not-Accessible

Integer32

This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.

LLDP.mib

lldpRemChassisIdSubtype

1.0.8802.1.1.2.1.4.1.1.4

Read-Only

LldpChassisIdSubtype (Integer)

The type of encoding used to identify the chassis associated with the remote system.

LLDP.mib

lldpRemChassisId

1.0.8802.1.1.2.1.4.1.1.5

Read-Only

LldpChassisId (Octet String)

The string value used to identify the chassis component associated with the remote system.

LLDP.mib

lldpRemPortIdSubtype

1.0.8802.1.1.2.1.4.1.1.6

Read-Only

LldpPortIdSubtype (Integer)

The type of port identifier encoding used in the associated 'lldpRemPortId' object.

LLDP.mib

lldpRemPortId

1.0.8802.1.1.2.1.4.1.1.7

Read-Only

LldpPortId (Octet String)

The string value used to identify the port component associated with the remote system.

LLDP.mib

lldpRemPortDesc

1.0.8802.1.1.2.1.4.1.1.8

Read-Only

SNMPAdminstring

The string value used to identify the description of the given port associated with the remote system.

LLDP.mib

lldpRemSysName

1.0.8802.1.1.2.1.4.1.1.9

Read-Only

SNMPAdminstring

The string value used to identify the system name of the remote system.

LLDP.mib

lldpRemSysDesc

1.0.8802.1.1.2.1.4.1.1.10

Read-Only

SNMPAdminstring

The string value used to identify the system description of the remote system.

LLDP.mib

lldpRemSysCapSupported

1.0.8802.1.1.2.1.4.1.1.11

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are supported on the remote system.

LLDP.mib

lldpRemSysCapEnabled

1.0.8802.1.1.2.1.4.1.1.12

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are enabled on the remote system.

LLDP.mib

lldpRemManAddrTable

1.0.8802.1.1.2.1.4.2

Not-Accessible

Sequence of LldpRemManAddrEntry

This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.

LLDP.mib

lldpRemManAddrEntry

1.0.8802.1.1.2.1.4.2.1

Not-Accessible

LldpRemManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemLocalPortNum of the local system.

LLDP.mib

lldpRemManAddrSubtype

1.0.8802.1.1.2.1.4.2.1.1

Not-Accessible

AddressFamilyNumbers

The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.

LLDP.mib

lldpRemManAddr

1.0.8802.1.1.2.1.4.2.1.2

Not-Accessible

LldpManAddress (Octet String)

The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.

LLDP.mib

lldpRemManAddrIfSubtype

1.0.8802.1.1.2.1.4.2.1.3

Read-Only

LldpManAddrIfSubtype (Integer)

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.

LLDP.mib

lldpRemManAddrIfId

1.0.8802.1.1.2.1.4.2.1.4

Read-Only

Integer32

The integer value used to identify the interface number regarding the management address component associated with the remote system.

LLDP.mib

lldpRemManAddrOID

1.0.8802.1.1.2.1.4.2.1.5

Read-Only

Object Identifier

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.

LLDP.mib

lldpRemUnknownTLVTable

1.0.8802.1.1.2.1.4.3

Not-Accessible

Sequence of LldpRemEntry

LLDP.mib

lldpRemUnknownTLVEntry

1.0.8802.1.1.2.1.4.3.1

Not-Accessible

LldpRemUnknownTLVEntry

Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

LLDP.mib

lldpRemUnknownTLVType

1.0.8802.1.1.2.1.4.3.1.1

Not-Accessible

Integer32

This object represents the value extracted from the type field of the TLV.

LLDP.mib

lldpRemUnknownTLVInfo

1.0.8802.1.1.2.1.4.3.1.2

Read-Only

Octet String

This object represents the value extracted from the value field of the TLV.

LLDP.mib

lldpRemOrgDefInfoTable

1.0.8802.1.1.2.1.4.4

Not-Accessible

Sequence of LldpRemOrgDefInfoEntry

This table contains one or more rows per physical network connection which advertises the organizationally defined information.

LLDP.mib

lldpRemOrgDefInfoEntry

1.0.8802.1.1.2.1.4.4.1

Not-Accessible

LldpRemOrgDefInfoEntry

Information about the unrecognized organizationally defined information advertised by the remote system.

LLDP.mib

lldpRemOrgDefInfoOUI

1.0.8802.1.1.2.1.4.4.1.1

Not-Accessible

Octet String

The Organizationally Unique Identifier (OUI), as defined in IEEE Std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.

LLDP.mib

lldpRemOrgDefInfoSubtype

1.0.8802.1.1.2.1.4.4.1.2

Not-Accessible

Integer32

The integer value used to identify the subtype of the organizationally defined information received from the remote system.

LLDP.mib

lldpRemOrgDefInfoIndex

1.0.8802.1.1.2.1.4.4.1.3

Not-Accessible

Integer32

This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance, unique only for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype from the same remote system.

LLDP.mib

lldpRemOrgDefInfo

1.0.8802.1.1.2.1.4.4.1.4

Read-Only

Octet String

The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC.

LLDP.mib

lldpExtensions

1.0.8802.1.1.2.1.5

lldpXdot3MIB

1.0.8802.1.1.2.1.5.4623

The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node.

LLDP-Ext-Dot3.mib

lldpXdot3Objects

1.0.8802.1.1.2.1.5.4623.1

LLDP-Ext-Dot3.mib

lldpXdot3Config

1.0.8802.1.1.2.1.5.4623.1.1

LLDP-Ext-Dot3.mib

lldpXdot3PortConfigTable

1.0.8802.1.1.2.1.5.4623.1.1.1

Not-Accessible

Sequence of LldpXdot3PortConfigEntry

A table that controls selection of LLDP TLVs to be transmitted on individual ports.

LLDP-Ext-Dot3.mib

lldpXdot3PortConfigEntry

1.0.8802.1.1.2.1.5.4623.1.1.1.1

Not-Accessible

LldpXdot3PortConfigEntry

LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports.

LLDP-Ext-Dot3.mib

lldpXdot3PortConfigTLVsTxEnable

1.0.8802.1.1.2.1.5.4623.1.1.1.1.1

Read-Write

BITS

The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype.

LLDP-Ext-Dot3.mib

lldpXdot3LocalData

1.0.8802.1.1.2.1.5.4623.1.2

LLDP-Ext-Dot3.mib

lldpXdot3LocPortTable

1.0.8802.1.1.2.1.5.4623.1.2.1

Not-Accessible

Sequence of LldpXdot3LocPortEntry

This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

LLDP-Ext-Dot3.mib

lldpXdot3LocPortEntry

1.0.8802.1.1.2.1.5.4623.1.2.1.1

Not-Accessible

LldpXdot3LocPortEntry

Information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3LocPortAutoNegSupported

1.0.8802.1.1.2.1.5.4623.1.2.1.1.1

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.

LLDP-Ext-Dot3.mib

lldpXdot3LocPortAutoNegEnabled

1.0.8802.1.1.2.1.5.4623.1.2.1.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPortAutoNegAdvertisedCap

1.0.8802.1.1.2.1.5.4623.1.2.1.1.3

Read-Only

Octet String

This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPortOperMauType

1.0.8802.1.1.2.1.5.4623.1.2.1.1.4

Read-Only

Integer32

An integer value that indicates the operational MAU type of the given port on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerTable

1.0.8802.1.1.2.1.5.4623.1.2.2

Not-Accessible

Sequence of LldpXdot3LocPowerEntry

This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerEntry

1.0.8802.1.1.2.1.5.4623.1.2.2.1

Not-Accessible

LldpXdot3LocPowerEntry

Information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerPortClass

1.0.8802.1.1.2.1.5.4623.1.2.2.1.1

Read-Only

LldpPowerPortClass (Integer)

The value that identifies the port Class of the given port associated with the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerMDISupported

1.0.8802.1.1.2.1.5.4623.1.2.2.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerMDIEnabled

1.0.8802.1.1.2.1.5.4623.1.2.2.1.3

Read-Only

TruthValue (Integer)

The truth value used to identify whether MDI power is enabled on the given port associated with the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerPairControlable

1.0.8802.1.1.2.1.5.4623.1.2.2.1.4

Read-Only

TruthValue (Integer)

The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerPairs

1.0.8802.1.1.2.1.5.4623.1.2.2.1.5

Read-Only

Integer32

This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocPowerClass

1.0.8802.1.1.2.1.5.4623.1.2.2.1.6

Read-Only

Integer32

This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocLinkAggTable

1.0.8802.1.1.2.1.5.4623.1.2.3

Not-Accessible

Sequence of LldpXdot3LocLinkAggEntry

This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

LLDP-Ext-Dot3.mib

lldpXdot3LocLinkAggEntry

1.0.8802.1.1.2.1.5.4623.1.2.3.1

Not-Accessible

LldpXdot3LocLinkAggEntry

Link Aggregation information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3LocLinkAggStatus

1.0.8802.1.1.2.1.5.4623.1.2.3.1.1

Read-Only

LldpLinkAggStatusMap (BITS)

The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.

LLDP-Ext-Dot3.mib

lldpXdot3LocLinkAggPortId

1.0.8802.1.1.2.1.5.4623.1.2.3.1.2

Read-Only

Integer32

This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation.

LLDP-Ext-Dot3.mib

lldpXdot3LocMaxFrameSizeTable

1.0.8802.1.1.2.1.5.4623.1.2.4

Not-Accessible

Sequence of LldpXdot3LocMaxFrameSizeEntry

This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

LLDP-Ext-Dot3.mib

lldpXdot3LocMaxFrameSizeEntry

1.0.8802.1.1.2.1.5.4623.1.2.4.1

Not-Accessible

LldpXdot3LocMaxFrameSizeEntry

Maximum Frame Size information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3LocMaxFrameSize

1.0.8802.1.1.2.1.5.4623.1.2.4.1.1

Read-Only

Integer32

An integer value indicating the maximum supported frame size in octets on the given port of the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocLpiTable

1.0.8802.1.1.2.1.5.4623.1.2.5

Not-Accessible

Sequence of LldpXdot3LocLpiEntry

This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

LLDP-Ext-Dot3.mib

lldpXdot3LocLpiEntry

1.0.8802.1.1.2.1.5.4623.1.2.5.1

Not-Accessible

LldpXdot3LocLpiEntry

Information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3LocTxTwSys

1.0.8802.1.1.2.1.5.4623.1.2.5.1.1

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system can support in the transmit direction.

LLDP-Ext-Dot3.mib

lldpXdot3LocTxTwSysEcho

1.0.8802.1.1.2.1.5.4623.1.2.5.1.2

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is advertising that it can support in the transmit direction and is echoed by the local system under the control of the EEE DLL receiver state diagram.

LLDP-Ext-Dot3.mib

lldpXdot3LocRxTwSys

1.0.8802.1.1.2.1.5.4623.1.2.5.1.3

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is requesting in the receive direction.

LLDP-Ext-Dot3.mib

lldpXdot3LocRxTwSysEcho

1.0.8802.1.1.2.1.5.4623.1.2.5.1.4

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system under the control of the EEE DLL transmitter state diagram.

LLDP-Ext-Dot3.mib

lldpXdot3LocFbTwSys

1.0.8802.1.1.2.1.5.4623.1.2.5.1.5

Read-Only

Integer

A GET attribute that returns the value of the fallback Tw_sys that the local system is advertising to the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3TxDllReady

1.0.8802.1.1.2.1.5.4623.1.2.5.1.6

Read-Only

Integer

A GET operation returns the initialization status of the EEE transmit Data Link Layer management function on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3RxDllReady

1.0.8802.1.1.2.1.5.4623.1.2.5.1.7

Read-Only

Integer

A GET operation returns the initialization status of the EEE receive Data Link Layer management function on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3LocDllEnabled

1.0.8802.1.1.2.1.5.4623.1.2.5.1.8

Read-Only

Integer

A GET operation returns the status of the EEE capability negotiation on the local system.

LLDP-Ext-Dot3.mib

lldpXdot3EEESupportList

1.0.8802.1.1.2.1.5.4623.1.2.5.1.9

Read-Only

BITS

A read-only list of the possible PHY types for which the underlying system supports Energy Efficient Ethernet (EEE) as defined in Clause 78.

LLDP-Ext-Dot3.mib

lldpXdot3RemoteData

1.0.8802.1.1.2.1.5.4623.1.3

Not-Accessible

Sequence of LldpXdot3RemPortEntry

This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortTable

1.0.8802.1.1.2.1.5.4623.1.3.1

Not-Accessible

Sequence of LldpXdot3RemPowerEntry

This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortEntry

1.0.8802.1.1.2.1.5.4623.1.3.1.1

Not-Accessible

LldpXdot3RemPortEntry

Information about a particular physical network connection.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortAutoNegSupported

1.0.8802.1.1.2.1.5.4623.1.3.1.1.1

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortAutoNegEnabled

1.0.8802.1.1.2.1.5.4623.1.3.1.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortAutoNegAdvertisedCap

1.0.8802.1.1.2.1.5.4623.1.3.1.1.3

Read-Only

Octet String

This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPortOperMauType

1.0.8802.1.1.2.1.5.4623.1.3.1.1.4

Read-Only

Integer32

An integer value that indicates the operational MAU type of the sending device.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerTable

1.0.8802.1.1.2.1.5.4623.1.3.2

Not-Accessible

Sequence of LldpXdot3RemPowerEntry

This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerEntry

1.0.8802.1.1.2.1.5.4623.1.3.2.1

Not-Accessible

LldpXdot3RemPowerEntry

Information about a particular physical network connection.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerPortClass

1.0.8802.1.1.2.1.5.4623.1.3.2.1.1

Read-Only

LldpPowerPortClass (Integer)

The value that identifies the port Class of the given port associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerMDISupported

1.0.8802.1.1.2.1.5.4623.1.3.2.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerMDIEnabled

1.0.8802.1.1.2.1.5.4623.1.3.2.1.3

Read-Only

TruthValue (Integer)

The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerPairControlable

1.0.8802.1.1.2.1.5.4623.1.3.2.1.4

Read-Only

TruthValue (Integer)

The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerPairs

1.0.8802.1.1.2.1.5.4623.1.3.2.1.5

Read-Only

Integer32

This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemPowerClass

1.0.8802.1.1.2.1.5.4623.1.3.2.1.6

Read-Only

Integer32

This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemLinkAggTable

1.0.8802.1.1.2.1.5.4623.1.3.3

Not-Accessible

Sequence of LldpXdot3RemLinkAggEntry

This table contains port link aggregation information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemLinkAggEntry

1.0.8802.1.1.2.1.5.4623.1.3.3.1

Not-Accessible

LldpXdot3RemLinkAggEntry

Link Aggregation information about remote system's port component.

LLDP-Ext-Dot3.mib

lldpXdot3RemLinkAggStatus

1.0.8802.1.1.2.1.5.4623.1.3.3.1.1

Read-Only

LldpLinkAggStatusMap (BITS)

The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.

LLDP-Ext-Dot3.mib

lldpXdot3RemLinkAggPortId

1.0.8802.1.1.2.1.5.4623.1.3.3.1.2

Read-Only

Integer32

This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE Std 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemMaxFrameSizeTable

1.0.8802.1.1.2.1.5.4623.1.3.4

Not-Accessible

Sequence of LldpXdot3RemMaxFrameSizeEntry

This table contains one row per port of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemMaxFrameSizeEntry

1.0.8802.1.1.2.1.5.4623.1.3.4.1

Not-Accessible

LldpXdot3RemMaxFrameSizeEntry

Maximum Frame Size information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3RemMaxFrameSize

1.0.8802.1.1.2.1.5.4623.1.3.4.1.1

Read-Only

Integer32

An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemLpiTable

1.0.8802.1.1.2.1.5.4623.1.3.5

Not-Accessible

Sequence of LldpXdot3RemLpiEntry

This table contains one row per port of Low Power Idle (LPI) information (as a part of the 802.3az specification of the remote system.

LLDP-Ext-Dot3.mib

lldpXdot3RemLpiEntry

1.0.8802.1.1.2.1.5.4623.1.3.5.1

Not-Accessible

LldpXdot3RemLpiEntry

Maximum Frame Size information about a particular port component.

LLDP-Ext-Dot3.mib

lldpXdot3RemTxTwSys

1.0.8802.1.1.2.1.5.4623.1.3.5.1.1

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system can support in the transmit direction.

LLDP-Ext-Dot3.mib

lldpXdot3RemTxTwSysEcho

1.0.8802.1.1.2.1.5.4623.1.3.5.1.2

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is advertising that it can support in the transmit direction as echoed by the remote system under the control of the EEE DLL receiver state diagram.

LLDP-Ext-Dot3.mib

lldpXdot3RemRxTwSys

1.0.8802.1.1.2.1.5.4623.1.3.5.1.3

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is requesting in the receive direction.

LLDP-Ext-Dot3.mib

lldpXdot3RemRxTwSysEcho

1.0.8802.1.1.2.1.5.4623.1.3.5.1.4

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is advertising that it is requesting in the receive direction as echoed by the remote system under the control of the EEE DLL transmitter state diagram.

LLDP-Ext-Dot3.mib

lldpXdot3RemFbTwSys

1.0.8802.1.1.2.1.5.4623.1.3.5.1.5

Read-Only

Integer

A GET attribute that returns the value of fallback Tw_sys that the remote system is advertising.

LLDP-Ext-Dot3.mib

lldpXMedMIB

1.0.8802.1.1.2.1.5.4795

LLDP-Ext-MED.mib

lldpXMedNotifications

1.0.8802.1.1.2.1.5.4795.0

LLDP-Ext-MED.mib

lldpXMedTopologyChangeDetected

1.0.8802.1.1.2.1.5.4795.0.1

A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another.

LLDP-Ext-MED.mib

lldpXMedObjects

1.0.8802.1.1.2.1.5.4795.1

LLDP-Ext-MED.mib

lldpXMedConfig

1.0.8802.1.1.2.1.5.4795.1.1

LLDP-Ext-MED.mib

lldpXMedLocDeviceClass

1.0.8802.1.1.2.1.5.4795.1.1.1

Read-Only

LldpXMedDeviceClass

Local Device Class.

LLDP-Ext-MED.mib

lldpXMedPortConfigTable

1.0.8802.1.1.2.1.5.4795.1.1.2

Not-Accessible

Sequence of LldpXMedPortConfigEntry

A table that controls selection of LLDP TLVs to be transmitted on individual ports.

LLDP-Ext-MED.mib

lldpXMedPortConfigEntry

1.0.8802.1.1.2.1.5.4795.1.1.2.1

Not-Accessible

LldpXMedPortConfigEntry

LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports.

LLDP-Ext-MED.mib

lldpXMedPortCapSupported

1.0.8802.1.1.2.1.5.4795.1.1.2.1.1

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device.

LLDP-Ext-MED.mib

lldpXMedPortConfigTLVsTxEnable

1.0.8802.1.1.2.1.5.4795.1.1.2.1.2

Read-Write

LldpXMedCapabilities

The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management.

LLDP-Ext-MED.mib

lldpXMedPortConfigNotifEnable

1.0.8802.1.1.2.1.5.4795.1.1.2.1.3

Read-Write

Integer

A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port.

LLDP-Ext-MED.mib

lldpXMedFastStartRepeatCount

1.0.8802.1.1.2.1.5.4795.1.1.3

Read-Write

Unsigned32

The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED.

LLDP-Ext-MED.mib

lldpXMedLocalData

1.0.8802.1.1.2.1.5.4795.1.2

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyTable

1.0.8802.1.1.2.1.5.4795.1.2.1

Not-Accessible

Sequence of LldpXMedLocMediaPolicyEntry

This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyEntry

1.0.8802.1.1.2.1.5.4795.1.2.1.1

Not-Accessible

LldpXMedLocMediaPolicyEntry

Information about a particular policy on a specific port component.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyAppType

1.0.8802.1.1.2.1.5.4795.1.2.1.1.1

Not-Accessible

PolicyAppType

The media type that defines the primary function of the application for the policy advertised by an endpoint.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyVlanID

1.0.8802.1.1.2.1.5.4795.1.2.1.1.2

Read-Only

Integer32

An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyPriority

1.0.8802.1.1.2.1.5.4795.1.2.1.1.3

Read-Only

Integer32

This object contains the value of the 802.1p priority which is associated with the given port on the local system.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyDscp

1.0.8802.1.1.2.1.5.4795.1.2.1.1.4

Read-Only

Integer33

This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyUnknown

1.0.8802.1.1.2.1.5.4795.1.2.1.1.5

Read-Only

TruthValue

A value of 'true' indicates that the network policy for the specified application type is currently unknown.

LLDP-Ext-MED.mib

lldpXMedLocMediaPolicyTagged

1.0.8802.1.1.2.1.5.4795.1.2.1.1.6

Read-Only

TruthValue

A value of 'true' indicates that the application is using a tagged VLAN.

LLDP-Ext-MED.mib

lldpXMedLocHardwareRev

1.0.8802.1.1.2.1.5.4795.1.2.2

Read-Only

SnmpAdminString

The vendor-specific hardware revision string as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocFirmwareRev

1.0.8802.1.1.2.1.5.4795.1.2.3

Read-Only

SnmpAdminString

The vendor-specific firmware revision string as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocSoftwareRev

1.0.8802.1.1.2.1.5.4795.1.2.4

Read-Only

SnmpAdminString

The vendor-specific software revision string as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocSerialNum

1.0.8802.1.1.2.1.5.4795.1.2.5

Read-Only

SnmpAdminString

The vendor-specific serial number as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocMfgName

1.0.8802.1.1.2.1.5.4795.1.2.6

Read-Only

SnmpAdminString

The vendor-specific manufacturer name as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocModelName

1.0.8802.1.1.2.1.5.4795.1.2.7

Read-Only

SnmpAdminString

The vendor-specific model name as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocAssetID

1.0.8802.1.1.2.1.5.4795.1.2.8

Read-Only

SnmpAdminString

The vendor-specific asset tracking identifier as advertised by the endpoint.

LLDP-Ext-MED.mib

lldpXMedLocLocationTable

1.0.8802.1.1.2.1.5.4795.1.2.9

Not-Accessible

Sequence of LldpXMedLocLocationEntry

This table contains Location information as advertised by the local system.

LLDP-Ext-MED.mib

lldpXMedLocLocationEntry

1.0.8802.1.1.2.1.5.4795.1.2.9.1

Not-Accessible

LldpXMedLocLocationEntry

Information about Location information for the local device.

LLDP-Ext-MED.mib

lldpXMedLocLocationSubtype

1.0.8802.1.1.2.1.5.4795.1.2.9.1.1

Not-Accessible

LocationSubtype

The location subtype advertised by the local device.

LLDP-Ext-MED.mib

lldpXMedLocLocationInfo

1.0.8802.1.1.2.1.5.4795.1.2.9.1.2

Read-Write

Octet String

The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object.

LLDP-Ext-MED.mib

lldpXMedLocXPoEDeviceType

1.0.8802.1.1.2.1.5.4795.1.2.10

Read-Only

Integer

Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPSEPortTable

1.0.8802.1.1.2.1.5.4795.1.2.11

Not-Accessible

Sequence of LldpXMedLocXPoEPSEPortEntry

This table contains one row per port of PSE PoE information on the local system known to this agent.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPSEPortEntry

1.0.8802.1.1.2.1.5.4795.1.2.11.1

Not-Accessible

LldpXMedLocXPoEPSEPortEntry

Information about a particular port PoE information.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPSEPortPowerAv

1.0.8802.1.1.2.1.5.4795.1.2.11.1.1

Read-Only

Gauge32

This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPSEPortPDPriority

1.0.8802.1.1.2.1.5.4795.1.2.11.1.2

Read-Only

Integer

Reflects the PD power priority that is being advertised on this PSE port.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPSEPowerSource

1.0.8802.1.1.2.1.5.4795.1.2.12

Read-Only

Integer

Defines the type of PSE Power Source advertised by the local device.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPDPowerReq

1.0.8802.1.1.2.1.5.4795.1.2.13

Read-Only

Gauge32

This object contains the value of the power required by a PD expressed in units of 0.1 watts.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPDPowerSource

1.0.8802.1.1.2.1.5.4795.1.2.14

Read-Only

Integer

Defines the type of Power Source advertised as being used by the local device.

LLDP-Ext-MED.mib

lldpXMedLocXPoEPDPowerPriority

1.0.8802.1.1.2.1.5.4795.1.2.15

Read-Only

Integer

Defines the priority advertised as being required by this PD.

LLDP-Ext-MED.mib

lldpXMedRemoteData

1.0.8802.1.1.2.1.5.4795.1.3

LLDP-Ext-MED.mib

lldpXMedRemCapabilitiesTable

1.0.8802.1.1.2.1.5.4795.1.3.1

Not-Accessible

Sequence of LldpXMedRemCapabilitiesEntry

A table that displays LLDP-MED capabilities of remote devices connected to individual ports.

LLDP-Ext-MED.mib

lldpXMedRemCapabilitiesEntry

1.0.8802.1.1.2.1.5.4795.1.3.1.1

Not-Accessible

LldpXMedRemCapabilitiesEntry

LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED.

LLDP-Ext-MED.mib

lldpXMedRemCapSupported

1.0.8802.1.1.2.1.5.4795.1.3.1.1.1

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port.

LLDP-Ext-MED.mib

lldpXMedRemCapCurrent

1.0.8802.1.1.2.1.5.4795.1.3.1.1.2

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port.

LLDP-Ext-MED.mib

lldpXMedRemDeviceClass

1.0.8802.1.1.2.1.5.4795.1.3.1.1.3

Read-Only

LldpXMedDeviceClass

Device Class as advertised by the device remotely connected to the port.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyTable

1.0.8802.1.1.2.1.5.4795.1.3.2

Not-Accessible

Sequence of LldpXMedRemMediaPolicyEntry

This table contains media policy information as advertised by the remote system.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyEntry

1.0.8802.1.1.2.1.5.4795.1.3.2.1

Not-Accessible

LldpXMedRemMediaPolicyEntry

Information about the per port per policy type policy information for a particular physical network connection.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyAppType

1.0.8802.1.1.2.1.5.4795.1.3.2.1.1

Not-Accessible

PolicyAppType

The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyVlanID

1.0.8802.1.1.2.1.5.4795.1.3.2.1.2

Read-Only

Integer32

An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyPriority

1.0.8802.1.1.2.1.5.4795.1.3.2.1.3

Read-Only

Integer32

This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyDscp

1.0.8802.1.1.2.1.5.4795.1.3.2.1.4

Read-Only

Integer32

This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyUnknown

1.0.8802.1.1.2.1.5.4795.1.3.2.1.5

Read-Only

TruthValue

A value of 'true' indicates that the network policy for the specified application type is currently unknown.

LLDP-Ext-MED.mib

lldpXMedRemMediaPolicyTagged

1.0.8802.1.1.2.1.5.4795.1.3.2.1.6

Read-Only

TruthValue

A value of 'true' indicates that the application is using a tagged VLAN.

LLDP-Ext-MED.mib

lldpXMedRemInventoryTable

1.0.8802.1.1.2.1.5.4795.1.3.3

Not-Accessible

Sequence of LldpXMedRemInventoryEntry

This table contains inventory information as advertised by the remote system.

LLDP-Ext-MED.mib

lldpXMedRemInventoryEntry

1.0.8802.1.1.2.1.5.4795.1.3.3.1

Not-Accessible

LldpXMedRemInventoryEntry

Information about inventory information for the remote devices connected to the ports.

LLDP-Ext-MED.mib

lldpXMedRemHardwareRev

1.0.8802.1.1.2.1.5.4795.1.3.3.1.1

Read-Only

SnmpAdminString

The vendor-specific hardware revision string as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemFirmwareRev

1.0.8802.1.1.2.1.5.4795.1.3.3.1.2

Read-Only

SnmpAdminString

The vendor-specific firmware revision string as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemSoftwareRev

1.0.8802.1.1.2.1.5.4795.1.3.3.1.3

Read-Only

SnmpAdminString

The vendor-specific software revision string as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemSerialNum

1.0.8802.1.1.2.1.5.4795.1.3.3.1.4

Read-Only

SnmpAdminString

The vendor-specific serial number as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemMfgName

1.0.8802.1.1.2.1.5.4795.1.3.3.1.5

Read-Only

SnmpAdminString

The vendor-specific manufacturer name as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemModelName

1.0.8802.1.1.2.1.5.4795.1.3.3.1.6

Read-Only

SnmpAdminString

The vendor-specific model name as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemAssetID

1.0.8802.1.1.2.1.5.4795.1.3.3.1.7

Read-Only

SnmpAdminString

The vendor-specific asset tracking identifier as advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemLocationTable

1.0.8802.1.1.2.1.5.4795.1.3.4

Not-Accessible

Sequence of LldpXMedRemLocationEntry

This table contains Location information as advertised by the remote system.

LLDP-Ext-MED.mib

lldpXMedRemLocationEntry

1.0.8802.1.1.2.1.5.4795.1.3.4.1

Not-Accessible

LldpXMedRemLocationEntry

Information about Location information for the remote devices connected to the ports.

LLDP-Ext-MED.mib

lldpXMedRemLocationSubtype

1.0.8802.1.1.2.1.5.4795.1.3.4.1.1

Not-Accessible

LocationSubtype

The location subtype advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemLocationInfo

1.0.8802.1.1.2.1.5.4795.1.3.4.1.2

Read-Only

OCTET STRING

The location information advertised by the remote endpoint.

LLDP-Ext-MED.mib

lldpXMedRemXPoETable

1.0.8802.1.1.2.1.5.4795.1.3.5

Not-Accessible

Sequence of LldpXMedRemXPoEEntry

This table contains information about the PoE device type as advertised by the remote system.

LLDP-Ext-MED.mib

lldpXMedRemXPoEEntry

1.0.8802.1.1.2.1.5.4795.1.3.5.1

Not-Accessible

LldpXMedRemXPoEEntry

Information about PoE type of the remote devices connected to the ports.

LLDP-Ext-MED.mib

lldpXMedRemXPoEDeviceType

1.0.8802.1.1.2.1.5.4795.1.3.5.1.1

Read-Only

Integer

Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPSETable

1.0.8802.1.1.2.1.5.4795.1.3.6

Not-Accessible

Sequence of LldpXMedRemXPoEPSEEntry

This table contains extended PoE information as advertised by the remote devices of PSE type.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPSEEntry

1.0.8802.1.1.2.1.5.4795.1.3.6.1

Not-Accessible

LldpXMedRemXPoEPSEEntry

Information about Extended PoE PSE information for the remote devices connected to the ports.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPSEPowerAv

1.0.8802.1.1.2.1.5.4795.1.3.6.1.1

Read-Only

Gauge32

This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPSEPowerSource

1.0.8802.1.1.2.1.5.4795.1.3.6.1.2

Read-Only

Integer

Defines the type of PSE Power Source advertised by the remote device.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPSEPowerPriority

1.0.8802.1.1.2.1.5.4795.1.3.6.1.3

Read-Only

Integer

This object contains the value of the PSE power priority advertised by the remote device.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPDTable

1.0.8802.1.1.2.1.5.4795.1.3.7

Not-Accessible

Sequence of LldpXMedRemXPoEPDEntry

This table contains extended PoE information as advertised by the remote devices of PD type.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPDEntry

1.0.8802.1.1.2.1.5.4795.1.3.7.1

Not-Accessible

LldpXMedRemXPoEPDEntry

Information about XPoEPD information for the remote devices connected to the ports.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPDPowerReq

1.0.8802.1.1.2.1.5.4795.1.3.7.1.1

Read-Only

Gauge32

This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPDPowerSource

1.0.8802.1.1.2.1.5.4795.1.3.7.1.2

Read-Only

Integer

Defines the type of Power Source advertised as being used by the device connected remotely to the port.

LLDP-Ext-MED.mib

lldpXMedRemXPoEPDPowerPriority

1.0.8802.1.1.2.1.5.4795.1.3.7.1.3

Read-Only

Integer

Defines the priority advertised as being required by the PD connected remotely to the port.

LLDP-Ext-MED.mib