Setup Video

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More



A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
EAP245(EU)_V1_1.4.0 Build 180323
Published Date: 2018-04-13 Language: English File Size: 8.12 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above


New Features/Improvements:

1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

2. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11.

3. Optimized Rouge AP detection process.

4. Web UI optimization.


Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients can use Facebook and Whatsapp APP before passing the portal authentication.

3. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in the clients list.



1. For EAP245 (EU)_V1 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

Published Date: 2016-11-16 Language: English File Size: 7.84 MB

Recommended Controller Software Version:  Omada Controller v2.4.x

New Features/Improvements:

1. Support SSH command to reboot the device.

2. Support SNMP private nodes, including reboot, get the total number of clients and client MAC addresses.

3. Support remote SNMP configuration.

4. Updated maximum transmission power under FCC/CE for 2.4GHz, which is 25dBm/19dBm.


For EAP245 (EU) V1.

Published Date: 2016-09-24 Language: English File Size: 7.79 MB

Modifications and Bug Fixes:

The first firmware released.


1.Transmission power is compliant with CE.
2.Support EAP Controller V2.4x or higer version.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.