AV600 Passthrough Powerline Starter Kit TL-PA4010P KIT
- Data transmission rates upgraded to 600Mpbs1 over electrical wires, ideal for HD video streaming
- Integrated power socket making sure that no power outlet is going to waste
- Plug and play design and easy encryption on a push of pair button
- Power-Saving Mode automatically reduces power consumption by up to 85%2
Internet Goes Further with Your Home's Electricity System
AV600 Passthrough Powerline Starter Kit
Extend Wired Network to Any Room Using Existing Electricity System
With advanced HomePlug AV600, the TL-PA4010P KIT transforms your home’s existing electrical circuit into a high-speed network with no need for new wires or drilling and brings wired network to anywhere there is a power outlet. In addition, its integrated power socket makes sure that no power outlet is going to waste.
AV600 Speeds and 300 Meters Range
Using advanced Home Plug AV technology, TL-PA4010P KIT provides stable and high-speed data transmissions of up to 600 Mbps* for ranges of up to 300 meters where there is a power outlet. No interference on electrical or electronic equipment. Stream in HD, game online and download large files without interruption thanks to reliable powerline links.
*Listed HomePlug AV speed refers to the theoretical maximum physical-layer data transfer rate. Actual data speeds vary and are limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.
Play and Play with No Configuration Required
Ditch the complicated setup process for good. Get started with powerline in just two steps:
- Step1: connect one adapter to your router.
- Step2: plug in another adapter wherever you need wired internet service.
Press the "pair"
Press the Pair button on each adapter to encrypt the data sent between them, enhancing your network security.
Extra Power Socket for Additional Devices
The integrated power socket of TL-PA4010P allows an additional device or power bar to be connected to the adapter as though it were a normal wall socket, and the built-in noise filter also helps to prevent electrical signal noise from affecting Powerline performance. This ensures that even with the TL-PA4010P plugged in, no power outlet is going to waste.
Saves Up to 85% on Power
TL-PA4010P KIT automatically switches from its "Working" mode to efficient "Power-Saving" mode when not in use, reducing energy consumption by up to 85%*.
*1. The theoretical maximum channel data transfer rate is derived from HomePlug AV2 specifications. Actual data transfer rate will vary from network environment including: distance, network traffic, noise on electrical wires, building material and construction, quality of electrical installation and other adverse conditions.
*2. Actual data will vary because of the network conditions and environment factors.
*3. Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated.
|Plug Type||EU, UK, FR|
|Standards and Protocols||HomePlug AV, IEEE802.3, IEEE802.3u|
|Interface||1* 10/100Mbps Ethernet Port, Power Socket|
Maximum: 5.00W (220V/50Hz)
Typical: 4.60W (220V/50Hz)
Standby: 0.72W (220V/50Hz)
|LED||Power, Powerline, Ethernet|
|Dimensions ( W x D x H )||3.7 x 2.3 x 1.7 in. (95 x 58 x 42 mm)|
|Range||300 meters in house|
|Encryption||128-bit AES Encryption|
|Certification||CE, FCC, RoHS|
Powerline Ethernet Adapter *2
Ethernet cable (RJ45) *2
Quick Installation Guide
|System Requirements||Windows 8/7/Vista/XP/2000, Mac OS, Linux*|
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing