Does my device support the Omada app?
Follow the steps below to make sure the Omada app is supported on your Omada device.
1. Find out firmware version of your Omada device.
Follow the steps below to find the firmware version of your device ( Click here to know how to find the hardware versions) :
-
STEP1
Power on the EAP and connect to the SSID of the EAP wirelessly.
Tips: If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
-
STEP2
Launch a web browser and enter http://tplinkeap.net in the address bar.
-
STEP3
Enter the username and password of your EAP to log in.
Note: If your EAP is a brand new EAP, use the default username and password that are both admin.
-
STEP4
Go to the Monitoring > AP > Device Information page. You can view the Firmware Version as the following figure shows. The Build number indicates the released date, for example, 20180411 means the released date is April 11th, 2018.
2. Check compatibility
View the compatible devices list below to check if your device is compatible with Omada app. Please click the device image and check if you have the latest firmware. If not, download the latest firmware and follow the instructions in Step 3 to upgrade it.
Note 1: Both listed and higher hardware versions of these models are compatible with Omada APP.
Note 2: All the access points listed below are compatible with Omada App in both controller and standalone modes. While all the switches and routers listed below are compatible with Omada App only in controller mode.
*EAP245 V1, EAP225 V2/ V1, EAP115 V2/ V1, EAP110 V2/ V1, and EAP110-Outdoor V1 are also compatible with Omada App in standalone mode.
Access Points (Compatible in Controller and Standalone Modes)
-
EAP650
AX3000 WiFi 6 Accesspoint zur Deckenmontage
-
1_normal_1593077382117b.png)
EAP230-Wall
Omada AC1200 WLAN MU-MIMO Gigabit Accesspoint zur Wandmontage
-
EAP670
AX5400 WLAN-Dualband-Accesspoint zur Deckenmontage
-
EAP660 HD
AX3600-Multigigabit-Dualband-WLAN-Accesspoint zur Deckenmontage
-
EAP655-Wall
AX3000 WiFi 6 Access Point zur Wandmontage
-
EAP620 HD
AX1800-Wi-Fi 6-Dualband-Accesspoint zur Deckenmontage
-
EAP615-Wall
AX1800-Wi-Fi 6-Wand-Accesspoint
-
EAP610
AX1800-Dualband-Wi-Fi 6-Accesspoint zur Deckenmontage
-
EAP610-Outdoor
AX1800 Indoor/Outdoor WiFi 6 Accesspoint
-
4.0-F_normal_1593323223226a.png)
EAP265 HD
AC1750-Dualband-Gigabit-WLAN-HD-Accesspoint zur Deckenmontage
-
EAP235-Wall
Omada AC1200 MU-MIMO-Gigabit-WLAN-Accesspoint zur Wandmontage
-
4.0-F_normal_1593323197059j.png)
EAP225 V3*
AC1350-Gigabit-WLAN-Accesspoint mit MU-MIMO zur Deckenmontage
-
EAP225-Outdoor
AC1200-Dualband-Gigabit-WLAN-Outdoor-Accesspoint mit MU-MIMO
-
EAP225-Wall V2
Omada AC1200 Wireless MU-MIMO Wall-Plate Access Point
-
4.0-F_normal_1593323206680k.png)
EAP245 V3*
AC1750-Dualband-Gigabit-WLAN-Accesspoint zur Deckenmontage
-
4.0-F_normal_1593323303811i.png)
EAP115 V4*
300Mbit/s-WLAN-Accesspoint zur Deckenmontage
-
1_normal_1593077392336e.png)
EAP115-Wall
300Mbit/s-WLAN-Unterputz-Accesspoint
-
4.0-F_normal_1593323233431q.png)
EAP110 V4*
300Mbit/s-WLAN-Accesspoint zur Deckenmontage
-
EAP110-Outdoor V3*
300Mbit/s-WLAN-Outdoor-Accesspoint
-
EAP650-Outdoor
AX3000 Indoor/Outdoor WiFi 6 Access Point
Alle anzeigen 20 Access Points (Compatible in Controller and Standalone Modes)
Switches (Compatible in Controller Mode)
-
TL-SG3452XP
JetStream 52-Port Gigabit und 4-Port 10GE SFP+ L2+ Managed Switch mit 48-Port PoE+
-
TL-SG3452P
JetStream 52-Port Gigabit L2+ Managed Switch with 48-Port PoE+
-
TL-SG3452X
JetStream 48-Port Gigabit L2+-Managed Switch mit 4 10GE SFP+ Slots
-
TL-SG3428MP
JetStream-28-Port-Gigabit-L2-Managed-Switch mit 24 PoE+-Ports
-
TL-SG3428XMP
JetStream 24-Port Gigabit L2+-Managed-PoE+-Switch mit 4 10G-SFP+-Slots
-
TL-SG3428X
JetStream 24-Port Gigabit L2+ Managed Switch mit 4 10GE SFP+ Slots
-
TL-SG3210XHP-M2
JetStream 8-Port 2.5GBASE-T L2+ Managed PoE+ Switch mit 2 10G-SFP+-Slots
-
TL-SX3206HPP
JetStream 6-Port 10GE L2+ Managed Switch mit 4-Port PoE++
-
TL-SX3016F
JetStream 16-Port-10G-SFP+-L2+-Managed-Switch
-
1.0_01_normal_1617243824293n.png)
TL-SX3008F
JetStream 8-Port 10GE SFP+ L2+ Managed Switch
-
TL-SG2428P
JetStream-28-Port-Gigabit-Smart-PoE-Switch mit 4 SFP-Slots
-
TL-SL2428P
JetStream 24-Port 10/100Mbps + 4-Port Gigabit Smart Switch mit 24-Port PoE+
-
1.0_Gigabit_Switch_normal_1606214714802r.png)
TL-SG2218
JetStream 16-Port Gigabit Smart Switch mit 2 SFP-Slots
-
1.0_normal_1594869351357s.png)
TL-SG2210MP
Jetstream-8-Port-Gigabit-Smart-PoE-Switch mit 2 SFP-Slots
-
3.2_normal_1594974261923z.png)
TL-SG2210P V3.20
JetStream 10-Port-Gigabit-Smart-Switch mit 8 PoE+-Ports
-
1.0_Overviews_normal_1594869465633b.png)
TL-SG2008P
JetStream 8-Port-Gigabit-Smart-Switch mit 4 PoE+-Ports
-
3.0_overview_normal_1599720750009t.png)
TL-SG2008 V3
JetStream-8-Port-Gigabit-Smart-Switch
Alle anzeigen 17 Switches (Compatible in Controller Mode)
Routers (Compatible in Controller Mode)
-
TL-ER7206
SafeStream Gigabit Multi-WAN VPN Router
-
1.0_normal_1609659027171k.png)
ER7206
Omada Gigabit VPN Router
-
TL-R605
SafeStream Gigabit Multi-WAN VPN Router
(Nachfolgermodell: ER605) -
ER605 V2
Omada Gigabit VPN Router
3. Upgrade the firmware of your Omada device.
Follow the steps below to upgrade the firmware of your device:
-
STEP1
Power on the EAP and connect to the SSID of the EAP wirelessly.
Tips: If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
-
STEP2
Launch a web browser and enter http://tplinkeap.net in the address bar.
-
STEP3
Enter the username and password of your EAP to log in.
Note: If your EAP is a brand new EAP, use the default username and password that are both admin.
-
STEP4
Go to the System > Firmware Update page. Click the button, locate and choose the correct firmware file from your host. Then click the button to update the firmware of the EAP. After upgraded, the EAP will be rebooted automatically.
Von United States?
Erhalten Sie Produkte, Events und Leistungen speziell für Ihre Region