Setup Video

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    ¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
EAP320(US)_V1_160523
Fecha de Publicación : 2016-05-23 Idioma: Inglés Tamaño del Archivo : 7.38 MB

Modifications and Bug Fixes:

1. Improve stability of the EAP320.
2. Fixed the bug that Client device cannot connect after EAP320 reboot if VLAN is enabled on WPA-PSK/WAP2-PSK encrypted SSID.
3. Fixed the bug that EAP Controller cannot find or manage EAP320 after some time if Multi-SSID is enabled in 2.4GHz.

Notes:

1. You can only upgrade to the US firmware after update.
2. Transmission power is compliant with FCC.
3. If you upgrade this firmware, please also upgrade your EAP Controller to EAP Controller V2.4.2 or higher version.        

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 102.25MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 122.14MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 126.05MB
Sistema de Operación : Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Fecha de Publicación : 2018-11-08 Idioma: Inglés Tamaño del Archivo : 127.91MB
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as (!@#$%^&*).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Fecha de Publicación : 2018-01-05 Idioma: Inglés Tamaño del Archivo : 113.15MB
Sistema de Operación : Windows 7/8/10/Server

New Features/Improvements:
User Interface improvements
Bug Fixed:
1. Fix: COMODO security software will cause Initialization failure of the Omada Controller
2. Fix: Logo picture with transparent background will become black when uploaded in portal login page.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

GPL Code

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: