Your browser does not support JavaScript. Please turn it on for the best experience.
Hospitality
Learn More
Education
Catering
Retail
Healthcare
Enterprise
Transportation
Accommodation
Branch Location
Outdoor WiFi
Switches for Surveillance
Switches for Business WiFi
High-Density Environment
Wireless Networking for Elevators
WiFi Marketing
TL-SX3008F
Нов
TL-SX3016F
TL-SG3428
TL-SG3428X
TL-SG3210XHP-M2
TL-SG2008P
TL-SG2218
TL-SG116E
TL-SX105
TL-SF1005D
TL-SG108S
TL-SF1008LP
TL-SG1016D
TL-SG1024D
LS1008G
LS105G
LS108G
LS1005
LS1005G
LS1008
TL-SL1226P
TL-SG3428XMP
TL-SG1005P
Hot
TL-SG1005LP
TL-POE150S
TL-POE10R
TL-SM311LS
TL-POE2412G
TL-POE200
EAP660 HD
EAP245
EAP265 HD
EAP115
EAP110
EAP110-Outdoor
EAP235-Wall
EAP230-Wall
EAP225-Wall
EAP115-Wall
OC300
TL-SG2428P
ER7206
CPE710
Pharos Control
CPE610
CPE605
CPE510
CPE210
TL-ANT2424MD
TL-R480T+
TL-R470T+
Omada’s Software Defined Networking (SDN)
Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more.
Facebook Wi-Fi
Omada SDN (Software-Defined Networking) offers reliable business Wi-Fi with Facebook check-ins and Instagram follows. Power up your business with Omada business Wi-Fi.
Pharos Long-Range Wireless
Need to transmit network to long range or remote areas? Try Pharos wireless solution! Pharos is TP-Link's next-generation outdoor product series, providing long-range outdoor wireless networking solutions for applications such as WISP, Enterprise Bridge (P2P), and Wireless Surveillance (PtMP).
MAXtream
Worried about buffering when using outdoor wireless broadband? Try TP-Link MAXtream technology! MAXtream, the breakthrough TDMA technology, makes outdoor AP smoother and produces more efficient communications.
Case Study
Find the Stories
РЕШЕНИЕ
Back
ПРОДУКТИ
ТЕХНОЛОГИИ
ПАРТНЬОРИ
ПОДДЪРЖА
All Support
Configuration Guide
Download Center
Technical Support
FAQs
Replacement & Warranty
TP-Link Emulators
GPL Code Center
ОБЩНОСТ
Omada Discovery Utility 5.0.8
New Feature/Enhancement:
1. Adapt to Omada SDN Controller v5.0, support new device protocol and new inform url format
Bug fixed:
1. Upgrade log4j version to 2.16.0 to avoid remote code execution vulnerability in Apache log4j2.
2. Fixed the bug that the actual issued IP address is inconsistent with the configuration.
3. Fixed the bug that batch IP is issued to multiple devices continuously, but not all of them are actually issued.
4. Fixed the bug that when a port conflict is detected, the prompt message is not centered and the display is incomplete.
Note:
1. Omada CBC v5 must use this version of Omada Discovery Utility due to the change of the inform url format.
2. Double click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software).
3. To run this software, you need to install JRE 8.0 on your PC first.
4. Omada Controller and Discover Utility cannot run on the same computer at the same time.
Omada Discovery Utility 4.2.4
1. Support to discover the gateway and switch that support Omada SDN platform.
2. Add timeout mechanism during adopting the devices.
1. This version of software can be used in both Windows and Mac operation system.
2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).
Omada Discovery Utility_v3.2.1
1. Fixed the bug that the Discovery Utility may fail to find EAPs.
2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.
Omada Discovery Utility_v3.1.13
1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.
2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.
2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).
3. To run this software, you need to install JRE 8.0 on your PC.
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
Feature Filter: Всички Въпроси и отговори Функции и спецификацииТърсете решениеИзискване за потребителско приложениеРъководство за конфигуриранеПомощСъвети за сигурностКогато настроите
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
OC300(UN)_V1_1.8.2 Build 20220411
Built-in Omada SDN Controller v5.1.8
OC300(UN)_V1_1.7.1_20220112
Built-in Omada SDN Controller v5.0.30
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
OC300(UN)_V1_1.2.3 Build 20210914
Built-in Omada SDN Controller v4.4.6
Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.
OC300(UN)_V1_1.2.2 Build 20210721
Build-in Omada SDN Controller v4.4.4
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
OC300(UN)_V1_1.1.0 Build 20210406
Build-in Omada SDN Controller v4.3.5
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.
OC300(UN)_V1_1.0.4 Build 20210118
Built-in Omada SDN controller v4.2.11.
Supported device models and firmware:
EAP:
EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above
EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above
EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above
EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above
EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above
EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above
EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above
EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above
EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1
Switch:
TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2
Gateway:
TL-R605_V1, TL-ER7206_V1
Bug Fixed:
1. Fixed the bug that we may not be able to export the XLSX file in Settings->Services->Export Data.
2. Fixed the bug that the OC300 may get an “Invalid Controller” error in the Cloud Access function if the OC300 didn’t connect to the Internet during the Quick Setup.
3. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.
4. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.
5. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.
6. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.
7. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.
8. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.
9. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.
10. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.
11. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes:
1. For OC300 (UN) V1 Only.
2. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.
3. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide.
4. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.
5. This version of the controller is applied to the Omada APP of version 3.0.X or above.
OC300(UN)_V1_1.0.3_Build_20201119
Built-in Omada SDN controller v4.2.8.
TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1
1. Support to manage TL-SL2428P(UN) 4.20.
2. Optimize the protocol for the device reporting information of rate/duplex capability.
3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.
4. Add the batch cancelling of devices migration in the migration function.
5. Vulnerability optimization
1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.
2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.
3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.
4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.
5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.
6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.
7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time.
8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
1. For OC300(UN) V1 Only.
3. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.
5. This version of the controller is applied to Omada APP of version 3.0.X or above.
OC300(UN)_V1_1.0.1 Build 20201016
Built-in Omada SDN controller v4.2.4.
Omada SDN Controller can manage only certain devices with supported firmware. Please make sure your device is compatible with Omada SDN Controller, and follow Omada Controller Upgrade Guide to upgrade OC200.
1. Support to import the SSL certificate of PFX format.
2. Support to create of up to 1000 sites.
3. Support arbitrary adjustment of logo display and closing logo.
4. Support to paste the IP address for everywhere there is IP setting.
5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller.
6. Support to print all unused voucher codes.
7. Support to delete the archived alert log and event log.
8. Support to export device list, client list, etc. in Export Data function.
9. Support to drag and drop card adjust the dashboard display.
10. Add the Hostname/IP setting which will be used for the controller URL in the notification email.
11. Add Past Connection page in the Insight menu.
12. Improve the MAP topology display.
1. Fixed the bug that the Limited Online Users voucher code still can be used after expired.
2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.
3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.
4. Fixed the bug that the cutout logo will show a black background.
5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
OC300(UN)_V1_1.0.0 Build 2020080
Bundle Omada Controller 4.1.5
If you are using the old controller(v3.2.10 or below) and planning to replace with OC300, please read the Omada Controller Upgrade Guide at first.
1. First firmware for OC300(UN)_v1.
2. Suitable for small and medium business network.
3. Omada SDN hardware controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.
4. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.
1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.
2. This version of controller is applied to Omada APP of version 3.0.X or above.
3. For OC300 (UN) v1.0 only.
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Присъединете се към TP-Link общносттаTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.
I would like to be kept up to date with TP-Link news, product updates and promotions.
By completing this form you confirm that you understand and agree to our Privacy Policy.
Sign Up
Следвайте ни
From United States?
Get products, events and services for your region.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy .
Basic Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
TP-Link
accepted_local_switcher, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-right-bottom
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
VISITOR_INFO1_LIVE, YSC, LOGIN_INFO, PREF, CONSENT, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC
Analysis and Marketing Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager & Google Optimize
_gid, _gat, _gat_global, _ga, _gaexp
Google Ads & DoubleClick
NID, IDE, test_cookie, id, 1P_JAR
Facebook
fr, spin, xs, datr, c_user, sb, _fbp
Crazy Egg
_ce.s, _CEFT, _gid, cean, _fbp, ceac, _drip_client_9574608, cean_asoc
Hotjar
_hjKB, _fbp, ajs_user_id, _BEAMER_LAST_UPDATE_zeKLgqli17986, _hjid, _gcl_au, _ga, ajs_anonymous_id, _BEAMER_USER_ID_zeKLgqli17986, _hjAbsoluteSessionInProgress, _hjFirstSeen, _hjIncludedInPageviewSample, _hjTLDTest
Linkedin
lms_analytics, AnalyticsSyncHistory, _gcl_au, liap