Setup Video

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Learn More

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
OC200(UN)_v1_1.2.0_Build_20190823
Published Date: 2019-10-14 Language: English File Size: 104.14MB

Bundle Omada Controller 3.2.3.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

New Feature/Enhancement:
1. Add "Select Page" feature on the management page of vouchers.
2. Change the default status of "Terms of Service" to uncheck. 
3. Optimize the "Free Authentication Policy" to support URL with suffixes. 
4. Optimize the UI of Backup & Restore and Starting Up page. 

Bug Fixed:
1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.
2. Fixed the bug that AP may disconnect from OC200 when it is upgrading the firmware.
3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

Notes:
1. For OC200 (UN) v1.0 only.
2. To use new features of OC200, you need to upgrade your EAP's firmware to the corresponding version.
3. Your device's configuration won't be lost after upgrading.

OC200(UN)_v1_1.1.0_Build_20190220
Published Date: 2019-03-19 Language: English File Size: 109.51MB

Bundle Omada Controller 3.1.4, click HERE for Controller release notes.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

New Feature/Enhancement:
1. Merge 2.4GHz and 5GHz SSID.
2. Add Guest Network function.
3. Add SSID Radius accounting to WPA-Enterprise security mode.
4. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.
5. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.
6. Add Layer-3 Accessibility in SSH.
7. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

Notes:
1. For OC200 (UN) v1.
2. To use new features of OC200, you need to upgrade your EAP's firmware to the corresponding version.
3. Your device's configuration won't be lost after upgrading.
4. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.
5. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.
6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

OC200(UN)_V1_1.0.3 Build 20181016
Published Date: 2018-11-08 Language: English File Size: 108.89MB

New Feature/Enhancement:
1. Optimize the OC200 startup waiting page and add a progress bar prompt.
2. Optimize the AP and OC200 online upgrade process, and add an upgrade prompt in the AP list.
3. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.
4. Prevent Operator users from viewing Device Account information.
5. Display AP channels in the AP list.
6. Interchange Map and Statistic page.
 

Bug fixed:
1. Fixed the bug that the Omada Controller page can't display normally in some browsers.
2. Fixed the bug that the password of Device Account does not support special character.
 

Notes:
1. For OC200 (UN) v1.
2. Your device's configuration won't be lost after upgrading.
 

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

Emulators

Firmware Version
Working Mode
Language
181016(UN)
-
English
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: