2.0_1499761906353c.jpg)
2.0_1499761207303z.jpg)
2.0_1499760514839i.jpg)
1.0_1499757582013n.jpg)
3.0_overview_normal_1599720750009t.png)
12.0_1516616402231o.jpg)
4.0_1516616629639a.jpg)
4.0_1516617261419g.jpg)
5.0_1506408183335r.jpg)
4.0-F_normal_1593323206680k.png)
4.0-F_normal_1593323197059j.png)
4.0-F_normal_1593323303811i.png)
4.0-F_normal_1593323233431q.png)
1.0_normal_1592202841088s.png)
2.0_02_normal_1592202820692y.png)
1_normal_1593077392336e.png)
1.0_1507530505121l.jpg)
_1494212122962d.jpg)
-2.0_1515461273586w.jpg)
-4_1499778161810b.jpg)
Download für EAP225-Wall
Setup Video
-
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
Weitere Informationen
-
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
Weitere Informationen
-
How to setup the OC200 via a web browser
This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Weitere Informationen
-
How to setup the OC200 via your mobile phone
This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Weitere Informationen
-
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
Weitere Informationen
-
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
Weitere Informationen
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Weitere Informationen
Häufig gestellte Fragen
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- Was ist TP-Link EAP Beamforming?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- Common questions about TP-Link EAP device when it’s used in home network
- How to set Access Control to create guest SSID on Omada Controller/EAP
- What if I forget the password of EAP Controller?
- Was ist TP-Link EAP/CAP MU-MIMO?
- So konfigurieren Sie den Omada-Controller als Windows-Dienst （höher als Controller 2.5.4）
- Source code template for External Web Portal (Controller 4.1.5 or above)
- Frequently asked questions of Omada SDN solution related to upgrading and management
- The Requirements of Establishing an External Portal Server (above Omada Controller 2.6.0)
- Was ist Schnelles Roaming von TP-Link Business Wi-Fi-Produkten?
- The Requirements of Establishing an External Portal Server (above Omada Controller 4.1.5)
- How to adopt EAP in Controller Mode?
- Fragen und Antworten für die TP-Link Omada Ap
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138)? (New UI)
- Do I need to keep controller running when using portal authentication?
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs?
- Wie kann man EAPs in verschiedenen VLANs mit dem Omada Controller verwalten?
- Wie kann man EAPs an verschiedenen Standorten über das Internet mit dem EAP/Omada Controller verwalten (über NAT Port Forwarding für Controller Host mit DHCP Option138)?
- Wie man EAPs an verschiedenen Standorten über das Internet mit dem EAP-Controller verwaltet (über NAT Port Forwarding für Controller Host mit EAP Discover Utility).
- Wie kann man EAPs an verschiedenen Standorten über das Internet mit dem EAP/Omada Controller (über VPN Tunnel mit DHCP Option138) verwalten?
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility)? (Old UI)
- Wie kann man EAPs in verschiedenen Subnetzen mit dem EAP/Omada Controller (über DHCP Option 138) verwalten?
- Wie kann man EAPs in verschiedenen Subnetzen mit dem EAP/Omada-Controller (über das EAP Discover Utility) verwalten?
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility)? (New UI)
- Frequently asked questions of EAP Series Access Points
- Wie kann man detaillierte Kundeninformationen zu einem EAP anzeigen?
- How to set up rate limit through EAP controller
- Was ist der Unterschied zwischen Login-Konto, Cloud-Konto, Gerätekonto und Benutzerkonto in Omada Controller?
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- How to configure the WLAN Group function on the Software Controller (or OC200)
- Troubleshooting of Wireless Issues for Omada EAP Products
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- What should I do when the controller fails to discover the EAP?
- How to configure the portal function on Omada Controller?
- Was ist "Airtime Fairness" bei TP-Link EAP/CAP?
- So wählen Sie EAP-Produkte aus
- Wie kann ich die Firmware meines EAP-Geräts über den Webbrowser aktualisieren?
- Wie finde ich die Firmware-Version meines EAP-Geräts?
- Wie konfiguriert man den Reboot-Zeitplan und die W-LAN-Zeitplanfunktion des Omada Controllers?
- Wie konfiguriert man den Load Balance Omada Controller
- So konfigurieren Sie die kostenlose Authentifizierungsrichtlinie für den EAP-Controller
- How to optimize wireless performance of EAP products
- Funktioniert die Konfiguration auch dann noch mit EAPs, wenn der Omada-Controller offline geht?
- Was soll ich tun, wenn ich einen Zertifikatsfehler habe?
- So konfigurieren Sie mehrere SSIDs mit mehreren Subnetzen auf EAP-Produkten
- Wie konfiguriere ich die Voucher-Authentifizierung am Omada-Controller?
- How to set up different SSIDs and Passwords for each EAP through EAP Controller?
- Source code template for External Web Portal (Controller 3.0.5 or below)
- What Can I Do If I Fail to Log In to the EAP via the Domain Name?
- Source code template for External Web Portal (Standalone Mode)
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Language of the Printed Voucher Code？
- How to Configure Band Steering on TP-Link Omada Controller?
- What should be noticed when running the EAP Controller for the first time?
- How to deploy EAP controller on a private cloud (AWS EC2)?
- How to build a Wireless Network for School Canteen using tp-link products?
- How to build a Wireless Network for Chain Store using tp-link products?
- How to build a Factory Network using TP-Link products?
- How to build a Wireless Network for Shopping Mall using tp-link products?
- How to build a Wireless Network for Dormitory using tp-link products?
- How to build a Network for Restaurant & Cafe using tp-link products?
- How to build a Campus Network using TP-LINK products?
- How to Manage EAPs at Different Locations
- How to Change the Default Ports for EAP Controller?
- Hotspot authentication for multiple subnet with different VLANs
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
| Datum der Veröffentlichung: 2019-07-04 | Sprache: Englisch | Dateigröße: 120.29MB |
Betriebssystem: Windows 7/8/10/Server |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
||
| Datum der Veröffentlichung: 2019-07-04 | Sprache: Englisch | Dateigröße: 124.2MB |
Betriebssystem: Windows 7/8/10/Server |
||
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
||
Q&A
Feature Configuration Guide
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP