Descarga para TL-R605 V1.60

Elija la versión de hardware:

V1.60

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Omada_Controller_V5.0.15_Window

Descargar
Fecha de Publicación: 2021-11-01 Idioma: Inglés Tamaño del archivo: 126.66MB
Sistema operativo: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_V4.4.6_Linux_x64.tar

Descargar
Fecha de Publicación: 2021-10-11 Idioma: Inglés Tamaño del archivo: 64.02 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.6_Linux_x64.deb

Descargar
Fecha de Publicación: 2021-10-11 Idioma: Inglés Tamaño del archivo: 62.28 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada Controller_V4.4.6_Windows

Descargar
Fecha de Publicación: 2021-09-28 Idioma: Inglés Tamaño del archivo: 94.07 MB
Sistema operativo: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_Controller_V4.4.4_Windows

Descargar
Fecha de Publicación: 2021-08-13 Idioma: Inglés Tamaño del archivo: 94.07 MB
Sistema operativo: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.4_linux_x64.deb

Descargar
Fecha de Publicación: 2021-08-13 Idioma: Inglés Tamaño del archivo: 62.28 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.4_linux_x64.tar

Descargar
Fecha de Publicación: 2021-08-13 Idioma: Inglés Tamaño del archivo: 63.90 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.3.5_linux_x64.deb

Descargar
Fecha de Publicación: 2021-05-07 Idioma: Inglés Tamaño del archivo: 59.39 MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide 

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

Omada_SDN_Controller_V4.3.5_linux_x64.tar

Descargar
Fecha de Publicación: 2021-05-07 Idioma: Inglés Tamaño del archivo: 60.90 MB
Sistema operativo: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide 

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    ¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

ER605(UN)_V1.6_1.1.1_20210723

Descargar
Fecha de Publicación: 2021-08-06 Idioma: Inglés Tamaño del archivo: 13.12 MB

This firmware is fully adapted to Omada SDN Controller 4.3.5 or above.

It is recommended to reboot ER605 before upgrading the firmware, as some of the below bugs in an older version of the firmware may cause the upgrade to fail.

 

New Feature/Enhancement:

1. Add Emergency mode to recovery the firmware, please refer to FAQ3062.

2. Add support for IPv6.

3. Add support for Daylight Saving Time (DST).

4. Optimize the priority of One-to-One NAT and IPsec tunnels.

5. New features in controller mode:

5.1 PPTP/L2TP VPN can be selected as the Interface for static route and policy routing.

5.2 Add support to customize the firewall parameters.

5.3 Routing table, VPN, DDNS, and Port forwarding status can be displayed on the Insight page.

5.4 Optimize the export of the OpenVPN certificate.

6. New features in standalone mode:

6.1 Multi networks are supported.

6.2 LAN-to-LAN ACL are added to manage the behavior between networks, refer to FAQ3061 for Configuration Guide.

 

Bug Fixed:

1. Fix the bug that Omada Gateway cannot be adopted after upgrading the firmware.

2. Fix the bug that the device account was reset after multiple configurations.

3. Fix the bug that TTL of the packets is reduced by 2 after forwarding.

4. Fix the bug that the existing sessions may not be switched to the backup WAN when performing the link backup.

5. Decouple some configurations of WAN and LAN.

6. Fix the bug that Virtual Server, One-to-One NAT and NAT Loopback failed.

7. Fix the bug that Speed Test failed in some circumstances.

 

Notes:

1. For ER605 (TL-R605) v1.0 and v1.6.

2. Your device’s configuration won’t be lost after upgrading.

3. This firmware is applied to the Omada APP of version 3.0.x or above.

ER605(UN)_V1.6_1.0.1_20210113

Descargar
Fecha de Publicación: 2021-03-03 Idioma: Inglés Tamaño del archivo: 13.02 MB

This firmware is fully adapted to the Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using an old Omada controller and plan to upgrade firmware for EAP, then you must upgrade the Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller.

 

New Feature/Enhancement:

1. Support to configure the L2TP VPN Server and IPsec site on the same WAN port.

2. Change the detection mechanism of the “Block Ping of Death” function in the firewall, remove the packet limit of fewer than 64 Bytes.

3. Optimize the Online Detection and DNS proxy mechanisms to improve the network stability for scenarios where the front-end device has a Disconnection Alert function.

4. Optimize for scenarios where the Omada SDN Controller is accessed via the cloud when Portal is enabled.

5. Improve the compatibility of IKEv2 VPN, and the stability of L2TP over IPsec VPN.

6. Improve the network stability when the static IP address is changed in multi-WAN mode.

 

Bug Fixed:

1. Fix the bug that the DHCP Server may down under special circumstances.

2. Fix the bug that the WAN connection may down when multi-network and VPN are configured.

3. Fix the bug that the router doesn’t forward data for up to 2 minutes when the L2TP VPN Client is connected.

4. Fix the bug that the Omada SDN Controller alerts incompatible devices.

5. Fix the bug that CPU and memory usage data are not correctly displayed in the Statistics functions of the Omada SDN Controller.

6. Fix the bug that the router occasionally generates the wrong routing table for the DNS server.

 

Notes:

1. For ER605(TL-R605) v1 only.

2. Your device’s configuration won’t be lost after upgrading.

3. This firmware is applied to the Omada APP of version 3.0.x or above.

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

SuscripciónTP-Link se toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link .

Desde United States?

Obtenga productos, eventos y servicios para su región.