Google Assistant Commands for TP-Link Smart Bulbs

Google Assistant Commands for TP-Link Smart Bulbs

*Note:  “Device Name(s)” is user defined during the Google Assistant setup process.

 

Smart Bulb on/off and dimming Commands:

1. Activate Google Assistant:

          a. “Hey Google”

          b. “Hi Google”

          c. “Ok Google”

2.  State your Command:

           a. Turn On

           b. Turn Off

           c. Dim

           d. Brighten

3.  State your Device Name

           a. Name of the device

           b. “Everything” to control all connected devices

Example:  “Hey Google turn on my Light Bulb”

 

Smart Bulb brightness control:

1. Activate Google Assistant:

          a. “Hey Google”

          b. “Hi Google”

          c. “Ok Google”

2.  State your Command and Device Name

           a. Set “device name or everything” to

           b. Set brightness of “device name or everything”

3.  State your Brightness:

           a. Brightness level

Example:  “Hey Google Set Brightness of My Light Bulb to 25%”

 

Smart Bulb Color control: LB130 only

1. Activate Google Assistant:

          a. “Hey Google”

          b. “Hi Google”

          c. “Ok Google”

2.  Command

           a. Set

           b. Make

           c. Change

3.  State your Device Name

           a. Name of the device

           b. “Everything” to control all connected devices

4.  State your color

           a. Choose form:  Yellow, Red, Blue, Purple, Orange, Green and Pink

Example:  “Hey Google Set My Light Bulb to Red”

          

  

This Article Applies to:
LB130 , LB120 , LB110
Configuration GuideUS | Updated 03-30-2017 16:14:53 PM