How to configure Address Reservation on Wi-Fi Routers (new logo)?

1. Log in to the web-based interface of the router. If you don’t know how to do that, please refer to

a. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

b. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Advanced > Network > DHCP Server.

  • To specify the IP address that the router assigns:

1) Tick the Enable DHCP Server checkbox.

2) Enter the starting and ending IP addresses in the IP Address Pool.

  1. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router.

4) Click Save.

  • To reserve an IP address for a specified client device:

1) Click Add in the Address Reservation section.

  1. Click View Existing Devices or enter the MAC address of the client device.
  2. Enter the IP address to reserve for the client device.
  3. Enter the Description for this entry.
  4. Tick the Enable This Entry checkbox and click OK.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

This Article Applies to:
TL-WR1043N( V5 ) , Archer C3150( V2 ) , Archer C60( V2 )
Configuration Guide | Updated 03-28-2017 02:49:20 AM