How to log into the web-based management interface of TP-Link Wireless Dual Band 4G LTE Router? (new logo)

The web-based management page is a built-in internal web server that does not require internet access.  It does however require your device to be connected to the TP-Link router.  This connection can be wired or wireless.

Note: Low version of your web browser may cause compatibility problem with the web-based interface (management page) of your device, such as unable to log into the interface, display incomplete features etc. It is strongly recommended to use a wired connection if you are going to change the router’s wireless settings or upgrade the firmware version of the router.  

Follow the steps below:

Here takes Archer MR200 as demonstration.

1. Connect your computer to the router.

Method 1: Wired

Connect your computer’s Ethernet port to one of the LAN ports on Archer MR200 via an Ethernet cable.

Method 2: Wirelessly

Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the router to connect wirelessly.

2. Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1. Set a strong password using 1-15 characters and click Save.

Note: For subsequent logins, use your password that you have created.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

This Article Applies to:
Archer MR400( V1 ) , Archer MR200( V2 )
Configuration Guide | Updated 08-16-2017 02:38:29 AM