How to configure system time of Archer C2_V5?

This page allows you to set the time manually or to configure automatic time synchronization. The Router can automatically update the time from an NTP server via the internet.

Note: Archer C2_V5 is used for demonstration in this article.

1. Login the router. For how to do that, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to System Tools > Time Settings.

To set time manually:

1. Select your local Time Zone.

2. Enter the Date in Month/Day/Year format.

3. Enter the Time in Hour/Minute/Second format.

4. Click Save.

To set time automatically:

1. Select your local Time Zone.

2. Enter the address or domain of the NTP Server I or NTP Server II.

3. Click Get GMT to get time from the internet if you have connected to the internet.

To set Daylight Saving Time:

1. Select Enable DaylightSaving.

2. Select the start time from the drop-down list in the Start field.

3. Select the end time from the drop-down list in the End field.

4. Click Save.

Note: This settings will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the router successfully; otherwise, time-based functions will not take effect.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

O artigo aplica-se a:
Archer C2( V5 )
Configuration Guide | Updated 11-01-2017 11:53:44 AM