How to add another powerline adapter to the existing powerline network with pair button?

I want to:

Add a new powerline adapter into the existing powerline network to extend my network.

For example, I’ve already set up a powerline network using powerline devices, but the network does not reach everywhere I need it to. I purchased another one to further extend my network.

How can I do that? Here takes TL-PA9020P KIT as demonstration.

1. Plug the new powerline adapter into a wall outlet near one of the existing powerline devices.

2. Wait for a minute, and check whether the Powerline LED  stays on. If it’s on, skip to step 3. If it’s not, continue with step 2 to pair the new powerline adapter into the secured powerline network.

a. Press the Pair button on one of the existing powerline devices for 1 second. Its Power LED  starts blinking.

b. Within two minutes, press the Pair button on the new powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED  stays on and solid, the pairing process is complete.

3. Relocate the new powerline adapter to the place where wired Internet access is needed.

Done!

Enjoy the Internet through your extended network!

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

O artigo aplica-se a:
TL-WPA8630P KIT( V2 ) , TL-PA7010P KIT( V1 V2 ) , TL-PA9020 KIT( V1 )
Configuration Guide | Updated 04-27-2017 01:46:51 AM