How to setup OpenVPN on TP-Link Routers (iOS)

OpenVPN is a free VPN (virtual private network) service that allows you to remotely access your Home network from anywhere with an open internet service.  OpenVPN is a multiplatform service that works with both Android and iOS operating systems, allowing you to access devices and services in use through your router.

This article will take you through the steps needed to create and establish an OpenVPN connection with your TP-Link router.

 

Setting up OpenVPN on a TP-Link Router
(This example uses the Archer C5400)

Step 1:  Log into your router using tplinkwifi.net.  The default username and password are admin.

 

Step 2:  Click Advanced on the top navigation bar.

Step 3:  Click VPN Server, then OpenVPN.

Step 4:  Click Certificate to generate a certificate.

Note:  This step must be completed before enabling OpenVPN.

Step 5:  Check the Enable VPN Server box, then fill in the following information as prompted. Click Save.

Note:  What you select for Client Access will determine the content you are able to view over the VPN. Internet and Home Network will allow you to use your home internet service as well as access to your network shares. Home Network Only solely grants access to your network’s shared files and drives without home internet service accessibility.

 

Step 6:  Click Export to download the desired files to your computer.

 

Connecting OpenVPN (iOS)

Step 1:  Download the OpenVPN Connect app from the Google Play store.

 

Step 2:  Connect your IOS device to your computer and open iTunes.

Step 3:  Click the iPhone button next to where the dropdown selection for music is (upper right corner).

 

Step 4:  Select Apps on the left menu bar and wait for the list to populate.

 

Step 5:  Navigate to the File Sharing section and select the OpenVPN app.

 

 

Step 6:  Navigate to OpenVPN Documents on the right and click Add File at the bottom.

Step 7:  Locate the OpenVPN certificate you exported to your computer and click Open.

Step 8:  Click Sync on the bottom right.

Step 9:  Once the sync is complete, you may safely disconnect your iOS device from your computer.

 

Step 10:  With your iOS device, launch the OpenVPN app. Tap the green ‘+’ to add the certificate.

Step 11:   Slide the switch to connect the VPN and select Yes to confirm.

 

 

Step 12:  If connection is successful, a window similar to the following will appear.

 

You are now connected to your home network via VPN. To verify, you can visit the VPN connections window in your router settings.

O artigo aplica-se a:
Archer C1200( V1 ) , Archer C60( V1 ) , Archer C3150( V1 )
User Application Requirement | Updated 10-09-2016 09:34:42 AM