Station CPE Wi-Fi extérieur 2.4 GHz 300 Mbps 12dBi (antenne intégrée) CPE220

  • Antenne interne directionnelle MIMO 2x2 bi polarisée 12dBi
  • Puissance de transmission ajustable entre 0 et 27dBm/500mw*
  • Conception optimisée pour des transmissions longue portée pouvant dépasser 2 km
  • Technologie TP-LINK Pharos MAXtream TDMA (Time Division Multiple Access), améliorant les performances de débit, capacité, latence idéale pour les usage Point / Multipoints
  • Système d'administration logiciel centralisé  : Pharos control
  • Modes opératoires : Point d'accès, Client, Répéteur, Routeur point d'accès, Routeur client point d'accès (WISP)
  • L'adaptateur PoE passif fourni permet une distance de 60m entre le CPE et sa source d'alimentation afin de le réinitialiser à distance
 

Point-to-Multi-Point Connections

TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users.

Enterprise Hardware

With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃  to +70 ℃.

Qualcomm Atheros enterprise 560MHz CPU

High power Tx and high sensitivity Rx radio front-end design

Advanced Antenna System

Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference

V-Pol Co-polarization Pattern

H-Pol Co-polarization Pattern

13km+ Wireless Data Transmission

Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.

13km+

TP-LINK MAXtream TDMA Technology

As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.

Pharos Control – Centralized Management System

CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

PharOS

User-friendly web-based management system allows professionals to do more specific configurations.

Emulator

2.4GHz 300Mbps 12dBi Outdoor CPE   CPE220

Built-in 12dBi Dual-polarized
Directional Antenna

AP / Client / Repeater / AP Router /
AP Client Router (WISP) operation modes

6KV Lightning Protection

Weather Proof Enclosure

15KV ESD Protection

Passive PoE Adapter

   CPE520  CPE510  CPE220  CPE210  TL-WA7210N
Wireless Performance          
Wireless Speed 5GHz 300Mbps 5GHz 300Mbps 2.4GHz 300Mbps 2.4GHz 300Mbps 2.4GHz 150Mbps
Transmit Power 27dBm 23dBm 30dBm 27dBm 27dBm
Antenna 16dBi 13dBi 12dBi 9dBi 12dBi
MIMO -
Coverage Range 20km+ 15km+ 13km+ 5km+ 5km+
Hardware          
Compatibility 802.11a/n 802.11a/n 802.11b/g/n 802.11b/g/n 802.11b/g/n
External Antenna Interface - - - - 1 * RP-SMA
Weatherproof Enclosure √(IPX5) √(IPX5) √(IPX5) √(IPX5)
Dual Ethernet Ports -
PoE Passthrough -
Grounding Terminal
Lightning Protection over
Ethernet Cable
-
ESD Protection 15kV 15kV 15kV 15kV 15kV
Lightning Protection 6kV 6kV 6kV 6kV 4kV
Power Supply 24V Passive PoE
Adapter
24V Passive PoE
Adapter
24V Passive PoE
Adapter
24V Passive PoE
Adapter
12V Power Adapter + Passive PoE Injector
Software  
Operation Modes AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode
Channel Bandwidth 5/10/20/40MHz 5/10/20/40MHz 5/10/20/40MHz 5/10/20/40MHz 20/40MHz
Transmit Power Control Stepping 1dBm Stepping 1dBm Stepping 1dBm Stepping 1dBm Stepping 3dBm
MAXtream TDMA Mode -
Throughtput Monitors -
Spectrum Analyzer -
Iperf Speed Test Tool -
Pharos Control Supported
(Central Network Management Application)
-
CARACTERISTIQUES MATERIELLES
Processeur Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Mémoire 64MB DDR2 RAM, 8MB Flash
Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
1 Grounding Terminal
1 Reset Button
Alimentation Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC
Consommation 10.8 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will
be higher by some amount depending on the length of the connecting cable.
Dimensions (LxPxH) 11×3.1×2.1 inch (276×79×60 mm)
Type d'antenne Built-in 12dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 60° (H-Plane) / 30° (E-Plane)
Note: For more details, please refer to datasheet
Protection 15KV ESD Protection
6KV Lightning Protection
Enceinte Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
Caractéristiques Wi-Fi
Standards Wi-Fi IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Protocole propriétaire TDMA Mode (with Pharos MAXtream enabled)
Débit Wi-Fi Up to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Fréquence 2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations
of the countries or regions in which the device is used.
Puissance de transmission 30dBm/1000mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending
on the limitations of the countries or regions in which the device is used.
CARACTERISTIQUES LOGICIELLES
Configuration Wi-Fi Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Administration Discovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
Outils système Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
Optimisations du niveau système Optimized IGMP Snooping/Proxy for multicast applications
Hardware watch dog
Caractéristiques PoE
Dimensions (LxPxH) 110×57×33.5mm
Courant d'entrée 0.8A Max @ 100VAC
Tension d'entrée 100VA~240VAC @ 50Hz~60Hz
Sortie 24VDC, 1.0A Max
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficacité >80%
Tension de sortie 24VDC(+4,5pins; -7,8pins)
Entrée 100-240VAC, 50/60Hz
Témoin lumineux d'états de puissance 0~0.8A: Green
0.8A~1.0A: Red
Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Interfaces 1 AC Jack with Earth Ground
1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data)
1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data)
Bouton Remote Reset Button
Autres
Certification CE, FCC, RoHS, IPX5
Contenu de l'emballage Outdoor Wireless CPE
24V 1A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
Système requis Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,
MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user
experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environnement Operating Temperature: -40℃~70℃ (-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing