How to configure DHCP Address Reservation (Broadcom Solution)

Preparation: Check Ethernet adapter’s MAC address of computer.
 
Step 1
Click on windows key  +   R key   on the keyboard at the same time.
 
Step 2
Type cmd in the box, and then press OK.
 
Step 3
On the popping up black window, type command ipconfig /all and press Enter. It will show all current network adapters’ MAC address of this computer.
 
For example, MAC address of this computer’s ethernet adapter: 48-5B-39-42-51-93 (please write it down for later use)
 
Step 4
Open the web browser and type in http://192.168.1.1in the address bar and press Enter. The Username and Password are both “admin”.
 
Step 5
Go to Advanced Setup-> LAN-> Static IP Lease List. Click on Add.
 
Step 6
In the new popping out window, please input the MAC address and IP address of the PC. Click on Save/Apply.
 
Step 7
You will see the new item added into the table. Click on Save/ApplyClick on Add to enter more items.
 
This Article Suits for:
TD-W8950ND , TD-W8960N
User Application Requirement | Updated 02-19-2013 17:22:55 PM